Search found 25 matches

by Adm_rsx
Sat Feb 27, 2016 7:10 pm
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Re: Kpro not connecting to laptop

Ok, so I tried my kpro into another Rsx with the same result. Still says:

drivers installed, on Line, ignition off.

I think something's wrong with the Ecu or the kpro board.
by Adm_rsx
Tue Feb 23, 2016 1:25 pm
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Re: Kpro not connecting to laptop

If I have the Ecu out of the car wouldn't I be able to upload a calibration or erase the Ecu?
by Adm_rsx
Tue Feb 23, 2016 11:06 am
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Re: Kpro not connecting to laptop

I would suggest that you undo any wiring you have recently done and see if that resolves the issue. When you changed the cams did you change the trigger wheels? Ok I will undo it and try again. When I swapped cams I did not change trigger wheels. The cams are straight out of the k24a2 with a 50* VTC
by Adm_rsx
Tue Feb 23, 2016 10:09 am
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Re: Kpro not connecting to laptop

Check your fuses as it sounds like there may be one blown. The K-Pro is detected and it is online, but it is not seeing the ignition switch being turned on, which usually means that the ECU is not powering up correctly. Is that why the green LED only comes on briefly then goes off? Do you happen to...
by Adm_rsx
Mon Feb 22, 2016 4:05 pm
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Re: Kpro not connecting to laptop

Spunkster wrote:What happens with the ECU completely unplugged and you connect just the USB to the K-Pro. What shows up in the lower left hand corner of KManager?
It says

Driver installed, On Line, Ignition Off
by Adm_rsx
Sat Feb 20, 2016 3:16 pm
Forum: K-Pro / KManager
Topic: Kpro not connecting to laptop
Replies: 11
Views: 2625

Kpro not connecting to laptop

Ok I have a kpro V4 upgraded around January last year. 2006 Rsx-S Turbo Kmanager 4.2.3 or the latest one out. Just recently swapped cams and wired in PLX wideband to chassis, no data logging wire to Ecu yet. Tried to start my car on the old calibration and car wouldn't run without foot on the gas. T...
by Adm_rsx
Sat Aug 15, 2015 8:29 am
Forum: K-Pro / KManager
Topic: using alternative vss
Replies: 36
Views: 6829

Re: using alternative vss

Oops I hAve a 1.15 ratio 3rd gear not 1.5.....


Any input?
Thanks
by Adm_rsx
Fri Aug 14, 2015 2:38 pm
Forum: K-Pro / KManager
Topic: using alternative vss
Replies: 36
Views: 6829

Re: using alternative vss

How would I calculate the correct amount of pulses per km or mile ? I have a 1.5 3rd gear ratio and have a 05-06 type S.

I run 255/40/170
by Adm_rsx
Sun Jan 13, 2013 9:50 am
Forum: General / Traction Control Manager Software
Topic: tc unit not beig picked up by usb
Replies: 5
Views: 5674

Re: tc unit not beig picked up by usb

Hondata wrote:What does the TC show as in the device manager?
It shows up as hondata Ecu. Then when you click it it drops down and shows hondata traction control.
by Adm_rsx
Sat Jan 12, 2013 9:22 am
Forum: General / Traction Control Manager Software
Topic: tc unit not beig picked up by usb
Replies: 5
Views: 5674

Re: tc unit not beig picked up by usb

What OS are you using? What does the TC show as in the device manager? Have you manually installed the drivers? See http://www.hondata.com/help/tractioncontrol/installing_usb_drivers.htm I'm running windows8. The computer used to pick up the TC unit every once in a while. But now not at all. And ye...
by Adm_rsx
Sat Jan 12, 2013 12:21 am
Forum: General / Traction Control Manager Software
Topic: tc unit not beig picked up by usb
Replies: 5
Views: 5674

tc unit not beig picked up by usb

so I have been having a problem with the tc unit not being picked up by my laptop when its plugged into the usb. ive updated the software as well as the usb drivers. im lost as to how to fix it.
by Adm_rsx
Fri Jan 04, 2013 10:31 am
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12141

Re: Need help setting up

Spunkster wrote:Just look at the sensor list and you can also configure the graph to show the parameters you want to look at.

Gotcha. Thank you, I see all the listings now and can make my own template. Thanks
by Adm_rsx
Thu Jan 03, 2013 6:00 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12141

Re: Need help setting up

You need to datalog in the Smanager, Kamanager or FlashPRo manager software. The datalogs from the Traction control unit itself in the Traction control software will be very short and Super high resolution. So just like a normal datalog for tuning correct? How would I veiw the TC portion of that log?
by Adm_rsx
Thu Jan 03, 2013 5:53 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12141

Re: Need help setting up

Spunkster wrote:How exactly are you datalogging? Do you have both USB cables connected?

I've got both the Ecu cable and TC cable plugged into the USB's and I'm datalogging from the TC manager.
by Adm_rsx
Wed Jan 02, 2013 6:11 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12141

Re: Need help setting up

well I've got traction control working. but I still however still cannot view the datalog after taking one. any ideas as to why that is?

all I get is the downloading screen and once that goes away.... nothing....

thsnks

adam