Search found 7 matches

by madaxgt
Sun Sep 08, 2019 10:40 pm
Forum: s300 / SManager
Topic: Closed Loop Malfunction
Replies: 16
Views: 3231

Re: Closed Loop Malfunction

Sorry for the delay. Its an old calibration and log but it still does it with my current cal which is much better fuelling-wise. I havent had much time to look at it but thinking to turn off fuel cut or alter the delay time and also look at some closed loop settings tps and max min adjustment. If yo...
by madaxgt
Sat Aug 17, 2019 6:34 am
Forum: s300 / SManager
Topic: Closed Loop Malfunction
Replies: 16
Views: 3231

Re: Closed Loop Malfunction

I also have this issue. I have a S300 V1 using the latest beta software. 2.7.3.0. On a P28 ecu. Mine happens after/during a tip-out. After throttle tip out i have tps of 0% so CL turns off. Then as i change up a gear also during 0% throttle, CL turns on for a short time (0.9seconds) but no fuel inje...
by madaxgt
Thu Oct 16, 2014 11:10 am
Forum: K-Pro / KManager
Topic: kpro S1 wideband not working,batt voltage between pins A1A24
Replies: 7
Views: 1395

Re: kpro S1 wideband not working,batt voltage between pins A

does the lambda heater relay have to be a solid state relay or can it be a std relay? I used the std relay pack main, fuel and what I think is the lambda relay from a dc5 integra.
by madaxgt
Wed Oct 15, 2014 2:54 pm
Forum: K-Pro / KManager
Topic: kpro S1 wideband not working,batt voltage between pins A1A24
Replies: 7
Views: 1395

Re: kpro S1 wideband not working,batt voltage between pins A

No but I could send it to a friend to test who has a k pro car. I will try that first.
by madaxgt
Wed Oct 15, 2014 12:59 pm
Forum: K-Pro / KManager
Topic: kpro S1 wideband not working,batt voltage between pins A1A24
Replies: 7
Views: 1395

Re: kpro S1 wideband not working,batt voltage between pins A

great, its hardly been used and all wired correctly. What are my options?
by madaxgt
Sun Oct 12, 2014 9:03 am
Forum: K-Pro / KManager
Topic: kpro S1 wideband not working,batt voltage between pins A1A24
Replies: 7
Views: 1395

kpro S1 wideband not working,batt voltage between pins A1A24

The wideband is wired in as per the hondata wiring for k20. I get a sensor heater wiring malfunction DTC P1166. I checked the service manual and the first thing it says to do is check voltage between A1 and A24 and if there is battery voltage then a new ecu is needed? I have battery voltage but sure...