Search found 8 matches

by welen78
Thu Sep 29, 2016 9:44 pm
Forum: Applications
Topic: Injector Driver Box
Replies: 55
Views: 74220

Re: Injector Driver Box

Thanks.

I plan to use it staged.
by welen78
Thu Sep 29, 2016 2:08 pm
Forum: Applications
Topic: Injector Driver Box
Replies: 55
Views: 74220

Re: Injector Driver Box

How does the injector driver work? When it gets activated does that make the second set of injectors to start at the next injector dutycykel or is there some function in the s300/kpro software that triggers the driver and then delys the starting point of the second set injectors by a fixed value the...
by welen78
Thu Sep 29, 2016 11:29 am
Forum: Applications
Topic: Injector Driver Box
Replies: 55
Views: 74220

Re: Injector Driver Box

If I use this with any other ECU.. Does the staged injectors fire directly the duty cykel after the driver gets the trigger signal or is there something else going on?
by welen78
Fri Sep 27, 2013 7:52 am
Forum: K-Pro / KManager
Topic: JDM k20A misfire as soon as boost hits. PLEASE HELP!!
Replies: 6
Views: 4688

Re: JDM k20A misfire as soon as boost hits. PLEASE HELP!!

Sorry I forgot to get back here. After I tried the 440cc injectors the problem was totaly gone. I ordered the bran new ID 1300 with stainless internals that should work perfectly with e85. It took a while to get them here to Sweden but after I got them I tuned the car on a dynapack and the result wa...
by welen78
Wed Jun 26, 2013 8:31 am
Forum: K-Pro / KManager
Topic: JDM k20A misfire as soon as boost hits. PLEASE HELP!!
Replies: 6
Views: 4688

Re: JDM k20A misfire as soon as boost hits. PLEASE HELP!!

I tryed the rev hard turbo map in the k manager software and had the same problem. I tryed the dw1300 deadtimes and the problem was still there. I then borrowed a set of 440cc injectors and changed out the DW 1300cc injectors and the problem was gone. I will switch back and see if the problems comes...
by welen78
Mon Jun 24, 2013 3:20 pm
Forum: K-Pro / KManager
Topic: JDM k20A misfire as soon as boost hits. PLEASE HELP!!
Replies: 6
Views: 4688

Re: JDM k20A misfire as soon as boost hits. PLEASE HELP!!

Can I use both PRA and PRB calibrations for my PRC hondata ecu as long as I disable the vtec oil pressure switch under vtec parameters??

Or does it has to be prc/prd based calibrations?.. Cant find any of those...
by welen78
Mon Jun 24, 2013 3:07 pm
Forum: K-Pro / KManager
Topic: JDM k20A misfire as soon as boost hits. PLEASE HELP!!
Replies: 6
Views: 4688

Re: JDM k20A misfire as soon as boost hits. PLEASE HELP!!

Thanks for the reply. The turbo system is built on a long runner NA header.. Like putting a turbo at the end of a 4-1 NA header. The lambda is pretty far from the head but it sees a lot of heat and is probebly damaged. The dyno lambda shows a leaner value. I turned closed loop off for tuning and bec...
by welen78
Sun Jun 23, 2013 1:46 pm
Forum: K-Pro / KManager
Topic: JDM k20A misfire as soon as boost hits. PLEASE HELP!!
Replies: 6
Views: 4688

JDM k20A misfire as soon as boost hits. PLEASE HELP!!

I am trying to help a guy and tune his car and the car is a Ariel Atom with a jdm engine and a prc ecu that is fitted with a kpro. Detch werks 1300cc injectors e85 precision turbo, I think it is a 58mm intercooler wastegate and bov. non recirculated hondata 4 bar map sensor prc hondata ecu return st...