Search found 19839 matches

by Spunkster
Thu Jul 22, 2021 1:18 pm
Forum: K-Pro / KManager
Topic: Tapping into rpm
Replies: 4
Views: 15

Re: Tapping into rpm

You should not tap the sensors or the TPS. These are all required for it to work.

E26 is the engine speed output to the cluster.

Without knowing what it is you are trying to do it is really hard to give advice.
by Spunkster
Thu Jul 22, 2021 10:06 am
Forum: K-Series Reflash
Topic: 2006 tsx MT Reflash
Replies: 1
Views: 7

Re: 2006 tsx MT Reflash

No, we need the ECU, key and immobilizer to be able to reflash it.
by Spunkster
Mon Jul 19, 2021 2:05 pm
Forum: K-Pro / KManager
Topic: How To Tell Which Version Of Kpro I Have
Replies: 29
Views: 10959

Re: How To Tell Which Version Of Kpro I Have

Either can be used.
by Spunkster
Mon Jul 19, 2021 2:04 pm
Forum: K-Pro / KManager
Topic: Got tuned with MAP Port unplugged, do I need to re-tune?
Replies: 1
Views: 12

Re: Got tuned with MAP Port unplugged, do I need to re-tune?

You will probably need to discuss this with the tuner so they can check it and see if additional tuning is required.
by Spunkster
Mon Jul 19, 2021 11:53 am
Forum: K-Pro / KManager
Topic: How To Tell Which Version Of Kpro I Have
Replies: 29
Views: 10959

Re: How To Tell Which Version Of Kpro I Have

It is a version 2. What is the ECU part number on the white plug inside the ECU?
by Spunkster
Mon Jul 19, 2021 11:51 am
Forum: Traction Control with KPro
Topic: traction control with hall effect sensors
Replies: 12
Views: 64

Re: traction control with hall effect sensors

Are the sensors supposed to be wired to 5 volts instead of 12 volts?
by Spunkster
Mon Jul 19, 2021 11:44 am
Forum: FlashPro Manager
Topic: Fail to upload new calibrations
Replies: 10
Views: 123

Re: Fail to upload new calibrations

Spunkster wrote: Mon Jul 12, 2021 9:49 am What is your ECU part number?

What are you clicking on when you get the error?
by Spunkster
Mon Jul 19, 2021 11:35 am
Forum: K-Pro / KManager
Topic: I need serious help
Replies: 3
Views: 122

Re: I need serious help

If it works as it should in a known good vehicle, then it sounds like there is a wiring issue in your vehicle.
by Spunkster
Mon Jul 19, 2021 11:34 am
Forum: Hondata Mobile
Topic: Hondata App Not Showing Analog Input
Replies: 3
Views: 22

Re: Hondata App Not Showing Analog Input

No, this is not possible.
by Spunkster
Fri Jul 16, 2021 12:31 pm
Forum: Traction Control with KPro
Topic: traction control with hall effect sensors
Replies: 12
Views: 64

Re: traction control with hall effect sensors

You should be able to attach them the same way you attached the datalog.

The datalog you have provided shows the car not running and no data.
by Spunkster
Fri Jul 16, 2021 12:29 pm
Forum: Civic Type R 2015+
Topic: Fk8 2017 uploading error
Replies: 12
Views: 101

Re: Fk8 2017 uploading error

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
by Spunkster
Wed Jul 14, 2021 4:25 pm
Forum: K-Pro / KManager
Topic: Clutch Release Solenoid via Nitrous Control
Replies: 14
Views: 143

Re: Clutch Release Solenoid via Nitrous Control

That is true any time you are using an input or output for another purpose.
by Spunkster
Wed Jul 14, 2021 1:06 pm
Forum: s300 / SManager
Topic: S300 Unknow Device
Replies: 17
Views: 99

Re: S300 Unknow Device

send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

include a link t this thread
by Spunkster
Wed Jul 14, 2021 12:36 pm
Forum: s300 / SManager
Topic: S300 Unknow Device
Replies: 17
Views: 99

Re: S300 Unknow Device

Was the same s300 used on the other ECU?
by Spunkster
Wed Jul 14, 2021 9:31 am
Forum: Traction Control with FlashPro
Topic: Orange Wire Connection
Replies: 5
Views: 86

Re: Orange Wire Connection

Do not go by color. Go by pin position.