Search found 19 matches

by antkouv
Thu Jul 26, 2018 1:55 am
Forum: FlashPro Manager
Topic: Injector change
Replies: 1
Views: 231

Injector change

I currently have ID1000 injectors on my S2000 and are going to change to ID13000x. What do i need to change in my existing calibration in order for it to keep the same afr and idling behaviour? Do I just change the "current injector size" to 1500 (I have 55psi fuel pressure) and the program makes in...
by antkouv
Wed Jun 07, 2017 12:46 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: LS-2 coils in S2000
Replies: 4
Views: 739

Re: LS-2 coils in S2000

I had NGK BKR8EIX with OEM coils and changed to Denso IK24 with K20 coils.
by antkouv
Tue Jun 06, 2017 11:34 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: LS-2 coils in S2000
Replies: 4
Views: 739

Re: LS-2 coils in S2000

In order to have a larger spark plug gap. At 15psi boost (stock compression ratio) I have to re-gap down to 0.5mm
by antkouv
Tue Jun 06, 2017 8:20 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: LS-2 coils in S2000
Replies: 4
Views: 739

LS-2 coils in S2000

I am looking into installing LS-2 coils in my 2006 european S2000. Are the specs of the OEM coils available to compare with the LS-2 coils? (dwell etc). And if not, is there an option in Flash Pro to alter these figures?
by antkouv
Fri Feb 12, 2016 1:02 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: ID 1000 injector size
Replies: 6
Views: 4996

Re: ID 1000 injector size

Hello again, Please look at the attached datalog (4th gear pull) or the print screen (easier). At 8370 the INJ shows to be 12.68ms and the duty cycle to be 88%. I have 2 questions: - How is the duty cycle calculated in the ECU? My calculations give a max time at 9000rpm of 13.33ms and there fore the...
by antkouv
Wed Feb 10, 2016 1:35 pm
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: ID 1000 injector size
Replies: 6
Views: 4996

Re: ID 1000 injector size

So if I change the injector size from 1000 to 1200, it will lean out, just like it would if I increased the fuel pressure value? And I will then have to increase all the fuel table values to get my AFR back to my target. Correct?
by antkouv
Wed Feb 10, 2016 5:32 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: ID 1000 injector size
Replies: 6
Views: 4996

Re: ID 1000 injector size

Ok, thank you for the clarification.

Regarding the actual fuel map values, what happens when you change the value from 1000 to 1200? The fuel values remain the same. Do I have to go and manually reduce them to get the previous AF again?
by antkouv
Wed Feb 10, 2016 1:17 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: ID 1000 injector size
Replies: 6
Views: 4996

ID 1000 injector size

Hello, I have a supercharger on my car, ID1000 injectors and a fuel pressure of 62psi. However, the map with which I have tuned the vehicle has 1000cc in the "current injector size". I therefore get wrong duty cycle values in my datalogs. The manufacturer says that at 62 psi the ID1000 flow 1200cc. ...
by antkouv
Thu Jan 21, 2016 12:54 pm
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Wideband on EDM s2000 ecu does not work?
Replies: 15
Views: 7115

Re: Wideband on EDM s2000 ecu does not work?

I have found that the issue has been resolved here (for the K-pro however): https://www.hondata.com/forum/viewtopic.php?f=12&t=10728&start=15 I think it might help someone with flashpro ECU to have a similar solution. Could you please post a picture here with the resistor that needs to be removed in...
by antkouv
Fri Nov 28, 2014 12:58 pm
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Another wideband/flashpro question.
Replies: 5
Views: 4109

Re: Another wideband/flashpro question.

Same issue here. With a PLX device it only reads down to 11.7. Datalog attached.

The PLX gauge shows correct values (for example 10.8-11.5)
by antkouv
Fri Nov 28, 2014 12:51 pm
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Wideband on EDM s2000 ecu does not work?
Replies: 15
Views: 7115

Re: Wideband on EDM s2000 ecu does not work?

Any feedback would be appreciated. I have double checked with the local dealer of PLX devices, and there is no problem with the PLX controller (we even replaced it with another). The PLX gause shows correct AF values while the analog output (dataloged through the FPM) only goes down to 11.7 (or 0.85...
by antkouv
Mon Nov 24, 2014 1:14 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Guage and Flashpro readings are different. HELP!
Replies: 21
Views: 7321

Re: Guage and Flashpro readings are different. HELP!

I have the same issue, and there are no spliced wires. The wire from the PLX controller has been connected to the ELD pin and the ground is correctly connected. When the muxture goes richer than 11.7 the ECU does not show it (it continues to datalog the 11.7 value) while the PLX DM6 gauge shows the ...
by antkouv
Sat Nov 22, 2014 8:50 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Wideband on EDM s2000 ecu does not work?
Replies: 15
Views: 7115

Re: Wideband on EDM s2000 ecu does not work?

Hello again,

I have finally connected the PLX wideband to the ELD pin and I get correct data (same as those shown on the PLX device. However, the ECU datalogged value never goes under 11.7, so if the mixture is say 11.4 it will still show 11.7.

Is this a know issue?
by antkouv
Mon May 19, 2014 4:12 am
Forum: FlashPro Calibrations
Topic: Base map for S2000 with Rotrex kit, Flash pro and ID1000 inj
Replies: 2
Views: 2995

Base map for S2000 with Rotrex kit, Flash pro and ID1000 inj

Hi all,

Does anyone have a FlashPro map setup for ID1000 injectors? I only need it for my car to have an ok idling operation and will fully tune it after that.

Thank you.

Antony
by antkouv
Mon Apr 14, 2014 1:25 pm
Forum: Traction Control with FlashPro
Topic: Settings for S2000
Replies: 4
Views: 3383

Re: Settings for S2000

How do i upload the file you sent me though?