Search found 81 matches

by pepperdanky
Mon Oct 02, 2017 6:11 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: Jerky shift daily drive
Replies: 3
Views: 2874

Re: Jerky shift daily drive

Try this. Using VTC tables during overrun should smooth tip-in and I adjusted the overrun MAP pressures to smooth tip-out. You may notice some more rev hang but you can probably put the fuel cut delay lower or back to stock without having much effect on the jerkiness.
by pepperdanky
Sat Oct 08, 2016 8:00 am
Forum: FlashPro Calibrations
Topic: 08 Si Hybrid Racing CAI Calibration Help
Replies: 23
Views: 10517

Re: 08 Si Hybrid Racing CAI Calibration Help

The calibration here is an altered RRB cal. You should see Civic-Si-Race-... in the new calibration window for the Race cals. Might have to check a box under the filters.
by pepperdanky
Sat Oct 08, 2016 5:09 am
Forum: FlashPro Calibrations
Topic: 08 Si Hybrid Racing CAI Calibration Help
Replies: 23
Views: 10517

Re: 08 Si Hybrid Racing CAI Calibration Help

None of the fuel tables in the 'RRB' cals have been adjusted from default, as they were meant to be run with the AFM for fueling. You may have better luck copying the fuel tables from the 'Race' calibration, which were tuned, into your map. Be aware that the fuel table scaling is different between t...
by pepperdanky
Tue Oct 04, 2016 3:37 am
Forum: FlashPro Calibrations
Topic: 08 Si Hybrid Racing CAI Calibration Help
Replies: 23
Views: 10517

Re: 08 Si Hybrid Racing CAI Calibration Help

You should stop using that calibration before you damage your engine. It is running crazy lean above 6000 rpm.
by pepperdanky
Fri Sep 30, 2016 3:59 am
Forum: Civic Si 2006-2011 Americas
Topic: Newbie looking to learn to tune.
Replies: 5
Views: 2738

Re: Newbie looking to learn to tune.

FlashPro help file has all the info you need.
by pepperdanky
Thu Aug 18, 2016 7:41 pm
Forum: FlashPro Manager
Topic: FlashPro v2.4.8 Race Calibration issue
Replies: 7
Views: 4439

Re: FlashPro v2.4.8 Race Calibration issue

Did you reupload the calibration? If you upgrade FPM and try to datalog on a previously uploaded calibration, the sensor readings can be off.
by pepperdanky
Thu Aug 18, 2016 6:16 pm
Forum: FlashPro Manager
Topic: Flashpro datalogging just save the last trip?
Replies: 2
Views: 1434

Re: Flashpro datalogging just save the last trip?

Any time you turn off the ignition the data log will end.
by pepperdanky
Tue Aug 16, 2016 1:58 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: General question K20 - popping/crackle noise for a "sport mode" possible?
Replies: 25
Views: 43871

Re: General question K20 - popping/crackle noise for a "sport mode" possible?

Could try increasing the overrun fuel cut delay or set the overrun cut rpm to 9000 or something so the injectors don't shut off.
by pepperdanky
Fri Aug 12, 2016 9:36 am
Forum: FlashPro Manager
Topic: Fuel Injection restart RPM
Replies: 3
Views: 1815

Re: Fuel Injection restart RPM

Then 1300 rpm may be the lower limit of what the ECU will allow.
by pepperdanky
Thu Aug 11, 2016 7:49 am
Forum: FlashPro Manager
Topic: Fuel Injection restart RPM
Replies: 3
Views: 1815

Re: Fuel Injection restart RPM

See "Injector Overrun Cutoff" here: https://www.hondata.com/help/flashpro/t ... meters.htm

The engine may stall when coming to idle if you lower the recover rpm below 1300.
by pepperdanky
Wed Aug 03, 2016 4:15 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: Hondata update 2.4.5.0 problems
Replies: 4
Views: 3419

Re: Hondata update 2.4.5.0 problems

Your clutch switch (at the top of the pedal) may need to be adjusted.
by pepperdanky
Fri Jul 29, 2016 6:10 am
Forum: FlashPro Manager
Topic: FlashProManager v2.4.9 Beta
Replies: 98
Views: 41938

Re: FlashProManager v2.4.5

Your custom tune is a "race" calibration and is no longer supported. You will need to redo the tune using one of the "RRB" starting calibrations.
by pepperdanky
Thu Jun 30, 2016 3:58 am
Forum: FlashPro Calibrations
Topic: Terrible acceleration from a stop
Replies: 14
Views: 7014

Re: Terrible acceleration from a stop

The problem is your AFM reading incorrectly. Changing the intake from stock without re-scaling the AFM will cause the bogging you are experiencing. See: https://www.hondata.com/help/flashpro/tuning_afm_flow.htm Depending on how poorly the intake was designed, it may be easier to use speed density (M...
by pepperdanky
Wed Jun 29, 2016 4:37 pm
Forum: FlashPro Calibrations
Topic: Terrible acceleration from a stop
Replies: 14
Views: 7014

Re: Terrible acceleration from a stop

You have disabled the AFM and are using MAP fuel tables?