Hondata

For a long time I was thinking it was driver error. Now it seems that it is not. Here's the problem. I cannot get any shift light to come on when it's commanded. I have set the shift light rpm settings multiple times , try to use cel and even used the nos settings as a output. I have even switched t...

go to tools then download. save the tune and name it whatever you want.

so i did some more testing this weekend. i only changed some output parameters and i only used it plugged into the laptop and the kpro. After i came home i tested it on my lift and it will work without being plugged into the laptop. So that is one issue solved i guess. I changed nothing since the la...

yes i does have my last settings and my registar name?

i dont quite understand your question?
are you saying close kpro. open kpro and plug usb in from tc unit to the laptop? should the usb to the kpro be plugged in or not?

Ok. Like I said in the first post......the traction control will not work without a laptop I between it and the ecu. I went to a test and tune to find this out:(. I have also tested in the shop.....will not work without laptop connected. The data log on the tc does not work either!!! But that's the ...

Yes. All lights come on. Iirc the usb light only comes on when plugged into the laptop

At the pins you recommended in your install directions. Igp1 pg1.

the actual traction control and its functions ie retard and wheel speed ect.....will only work when kpro and tc is plugged into a laptop with with the display on. i can physically see wheel speeds fr and r. it all works as it should. i did all the test and nothing show up bad when i just run the car...

Finally got a chance to use my traction control and the first problem I run into is the traction control will not work and will not show up on the display screen in kpro unless both are plugged into my laptop via usb. Basically I have to have my laptop open and all on to make work. Also the datalog ...

do you still have the fwd drag cal?
also when i do a datalog in traction control window the green bar goes all the way over but when i click to read log nothing happens?

ok that fixed that issue. my next question is where do i find all the traction control pre loaded maps? when i open the folder there is nothing there?

dont know if this helps but i downloaded the stand alone software and it let me register and everything seems to work?
i just wanted to see if it was the tc box. i have recently uninstalled the stand alone software.

Ok

just try to plug in 0n my new lap top and says same thing. software needs updated and there is no way to registar the owner.