Search found 32 matches

by KSeries4Life
Thu Jul 19, 2018 8:58 am
Forum: K-Pro / KManager
Topic: Tip-in Fuel Issues. Injector Dead Time Off?
Replies: 1
Views: 278

Tip-in Fuel Issues. Injector Dead Time Off?

KManager 4.3.5.0 KPro4 PRB ECU K24/K20 swapped 2004 S2000 Magnus Sheet Metal K-Series Intake Manifold 90mm KTuned TB Injector Dynamics 725 Return fuel system with KTuned FPR @ 60psi. No reference line. I'm revisiting an old issue I've been having with getting lean spikes at tip in and oscillating or...
by KSeries4Life
Fri Jun 22, 2018 6:13 am
Forum: K-Pro / KManager
Topic: Overrun cutoff Issues
Replies: 6
Views: 538

Re: Overrun cutoff Issues

So last night I decided to make some tweeks to my knock sensitivity (I've got some loud cams) and while I was in there, I figured I would uncheck "Disable fuel over-run cutoff delay" since it didn't seem to be working any way. Looking at the logs I took this morning, I noticed there is no longer a ....
by KSeries4Life
Wed Jun 20, 2018 12:11 pm
Forum: K-Pro / KManager
Topic: Overrun cutoff Issues
Replies: 6
Views: 538

Re: Overrun cutoff Issues

What about my overrun cutoff delay issue? Is your response confirming that it is the MAP value that brings it out of overrun? Do you know if the IACV lets air in during overrun? If so, this might explain some of my issues. I tried using one with the KTuned 80mm setup w/IACV, but it let way too much ...
by KSeries4Life
Wed Jun 20, 2018 7:50 am
Forum: K-Pro / KManager
Topic: Overrun cutoff Issues
Replies: 6
Views: 538

Re: Overrun cutoff Issues

Hello, Thanks for the response. 1) I reflashed my ECU yesterday with an Overrun Cutoff of 18 kpa. There still looks to be an exact time of .5 seconds delay before it goes into overrun, even when going below 18 kpa. This can be seen in the log I attached. 2) Is there anyway you could let me know the ...
by KSeries4Life
Tue Jun 19, 2018 8:38 am
Forum: K-Pro / KManager
Topic: Overrun cutoff Issues
Replies: 6
Views: 538

Overrun cutoff Issues

KManager 4.3.5.0 KPro4 PRB ECU K24/K20 swapped 2004 S2000 Magnus Sheet Metal K-Series Intake Manifold 90mm KTuned TB Injector Dynamics 725 Overrun cutoff manifold pressure set to 12 KPa on low/high cam My first issue is that "Disable fuel over-run cutoff delay" doesn't seem to work. I've got the box...
by KSeries4Life
Tue Sep 01, 2015 10:24 am
Forum: K-Pro / KManager
Topic: KManager 4.1.5.0 Advanced Protection Issue
Replies: 4
Views: 1118

Re: KManager 4.1.5.0 Advanced Protection Issue

Made the changes suggested, but still having an issue with advanced protection activating outside the conditions I have set. My conditions are: Oil Pressure < 50 psi AND RPM >= 4000 Oil Pressure < 20 psi AND RPM > 0 When cruising around 3500-3700 RPM it seems to activate anytime my pressure drops be...
by KSeries4Life
Thu Aug 27, 2015 9:10 am
Forum: K-Pro / KManager
Topic: Use FlashPro Injector Dead Times in KPro?
Replies: 1
Views: 813

Use FlashPro Injector Dead Times in KPro?

Need a baseline tune on injectors with known flow and dead time numbers. I have a set of 06-11 Civic Si injectors. Can the flow and dead times be copied over to KPro from the numbers seen in FlashPro? I would use these numbers as seen in FlashPro Injector size: 310cc 6v = 3.166 8v = 1.952 10v = 1.36...
by KSeries4Life
Wed Aug 26, 2015 8:02 am
Forum: K-Pro / KManager
Topic: KManager 4.1.5.0 Advanced Protection Issue
Replies: 4
Views: 1118

Re: KManager 4.1.5.0 Advanced Protection Issue

Never mind on my overrun issue. Did some poking around and looks like most with K24s set all the fields in the low and high cam overrun cutoff to 15 kPa. This fixed my overrun issue. I understand the concept of turning off the injectors under a preset manifold pressure, but I have not been able to f...
by KSeries4Life
Tue Aug 25, 2015 4:00 pm
Forum: K-Pro / KManager
Topic: KManager 4.1.5.0 Advanced Protection Issue
Replies: 4
Views: 1118

KManager 4.1.5.0 Advanced Protection Issue

KManager 4.1.5.0 KPro4 PRB ECU K24/K20 swapped 2004 S2000 Magnus Sheet Metal K-Series Intake Manifold 90mm KTuned TB KTuned FPR Injector Dynamics 725 E85 fuel Autometer 2246 Pressure Sender (measuring oil pressure) Hello, Main issue: I'm having issues with advanced protection activating when it see...
by KSeries4Life
Thu Aug 20, 2015 11:50 am
Forum: K-Pro / KManager
Topic: Cam Angle + Sensor Fluctuation
Replies: 7
Views: 2594

Re: Cam Angle + Sensor Fluctuation

Thanks, that makes sense to me. One thing to add however, is that there are times when my fluctuating sensor values smooth out or get worse based on RPM and load. Also gets worse when the motor is cold and a bit better when fully warm. My motor mounts are fairly solid so dono if vibration might have...
by KSeries4Life
Wed Aug 19, 2015 3:21 pm
Forum: K-Pro / KManager
Topic: Cam Angle + Sensor Fluctuation
Replies: 7
Views: 2594

Re: Cam Angle + Sensor Fluctuation

Thanks for your patience/help on this and my recent barrage of questions. Not to but like 5 years ago, I had no idea how a motor even worked haha. Fun stuff and because race car. Questions - Am I just looking at noise in the datalogs? I ask because I'm not seeing rapid voltage, eld and cam fluctuati...
by KSeries4Life
Tue Aug 18, 2015 5:26 pm
Forum: K-Pro / KManager
Topic: Cam Angle + Sensor Fluctuation
Replies: 7
Views: 2594

Re: Cam Angle + Sensor Fluctuation

Yeah, been having the VTC issue for a while and have replaced and cleaned all the things you listed. I think what I am looking at here is an electrical issue. My battery voltage and ELD is very jumpy. Could explain why multiple sensors are also jumping around. Been poking around and found someone wi...
by KSeries4Life
Tue Aug 18, 2015 12:04 pm
Forum: K-Pro / KManager
Topic: Cam Angle + Sensor Fluctuation
Replies: 7
Views: 2594

Cam Angle + Sensor Fluctuation

KManager 4.1.4.0 02-04 RSX Type S PRB ECU NA K24/K20 swapped 2004 S2000 Trying to track down why I'm getting a bunch of knock and it looks to be linked to cam angle changes. Locking my cams to 0 produces little to no knock and stepping up the angle amplifies my knock count. Looking through my logs, ...
by KSeries4Life
Tue Aug 18, 2015 9:12 am
Forum: Hondata Mobile
Topic: Praises, Issues, Requests
Replies: 0
Views: 3695

Praises, Issues, Requests

Being able to monitor my engine sensors via KProV4's bluetooth on my phone has been damn useful. Especially in my newly K-Swapped vehicle that doesn't have a working coolant temp gauge at the moment. And little things like being able to troubleshoot sensors via my phone when my head is under the hoo...
by KSeries4Life
Thu Aug 13, 2015 11:50 am
Forum: K-Pro / KManager
Topic: KPro w/ return fuel & aftermarket FPR
Replies: 1
Views: 889

KPro w/ return fuel & aftermarket FPR

KManager 4.1.4.0 02-04 RSX Type S PRB ECU NA K24/K20 swapped 2004 S2000 Magnus Sheet Metal K-Series Intake Manifold 90mm KTuned TB Stock return fuel system w/ KTuned FPR Injector Dynamics 725 E85 fuel Hello, Looked all around and couldn't find anything on this topic. I'm currently attempting to tune...