Search found 9 matches
- Mon Oct 22, 2018 10:31 pm
- Forum: Traction Control with KPro
- Topic: Kicks in when no wheel spin
- Replies: 3
- Views: 9763
Re: Kicks in when no wheel spin
I will do as soon as I take the car out on track again, thanks. How do I send you info?
- Fri Oct 19, 2018 1:43 am
- Forum: Traction Control with KPro
- Topic: Kicks in when no wheel spin
- Replies: 3
- Views: 9763
Kicks in when no wheel spin
I have a TC installed on my KPro 3. It works fine as TC but the problem is caused when it kicks in when it should not be. Randomly when accelerating it may kick in for a second and then let the engine rev. It even happened at idle. when I turn the TC off problem solved. i believe its a setup issue. ...
- Sun Feb 01, 2015 12:49 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Re: Sensors for Traction Control
Now installing the speed sensors (Hall effect by race technology). Just a clarification please. The newer type that have the wiring preintalled has already got a resistor built in (the signal wire sends 9.7V signal when supplied with 12V- since they will be powered by the ECU power). So do I just co...
- Sat Dec 06, 2014 9:10 am
- Forum: Traction Control with KPro
- Topic: Traction Control software - Disabled
- Replies: 3
- Views: 13111
Re: Traction Control software - Disabled
Hi, Just installed the latest Kmanager but does not include Traction Control either under the window or the parameters tab. How can I find it? Pls note that pc not connected to traction control module yet. So with Kpro do we connect the pc with the ECU or the traction control module to adjust the se...
- Thu Dec 04, 2014 3:39 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Re: Sensors for Traction Control
Back again. To start install.
Is the ELD input pin 15 as shown below? So you just need to connect the orange wire to that pin?
Is the ELD input pin 15 as shown below? So you just need to connect the orange wire to that pin?
- Sat Jun 07, 2014 5:33 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Re: Sensors for Traction Control
Ok, no problem. I am not expecting to have it installed before September so be patient pls.
- Tue May 20, 2014 12:07 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Re: Sensors for Traction Control
Yes S1 elise, I will proceed with the installation of the race technology sensors and keep you informed on my progress.
- Mon May 19, 2014 9:07 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Re: Sensors for Traction Control
Ok understood. The car is a K20A honda powered Lotus elise. Weight is 750kg and power over 240 bhp, so traction is an issue. The car never had ABS fitted so the easiest thing to do is custom manufacture wheel rings similar to the one shown on the image below: http://www.alpharacing.com/uploads/pics/...
- Mon May 19, 2014 2:26 am
- Forum: General / Traction Control Manager Software
- Topic: Sensors for Traction Control
- Replies: 10
- Views: 20524
Sensors for Traction Control
I Have a race car with no ABS sensors installed. Can you help me pls. By reading the instruction it seems that a 2 wire inductive sensor is appropriate. Am I correct? Do you just connect the 2 wires from each wheel sensor to the traction control module without supplying voltage? Where we could buy t...