Search found 10 matches

by OvoEljay
Mon Aug 08, 2016 7:26 am
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Re: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

so I jus thought I would post an update since the car runs now, I cleaned the IACV like hondata suggested and I changed the idle valve duty cycle slider in kpro (slid it to the right) reloaded my map and the car idles perfectly now, it doesn't bog down or anything even at higher rpms like before. I ...
by OvoEljay
Fri Aug 05, 2016 8:12 pm
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Re: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

The MAP sensor is still not working. It could be wiring or the ECU. really? i changed it with another stock one and the car has been idling now and thats the only thing ive changed.. and the idle valve slider in kpro but when i try to move the car as soon im moving and try to stop again the revvs d...
by OvoEljay
Fri Aug 05, 2016 8:03 pm
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Re: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

Since you do not have a wideband there are too many unknowns. Have you talked to your tuner about this or about getting a basemap? There is no way to see oil pressure in the K-Pro software. You will need some other oil pressure gauge for that. thanks again for the replies i will be getting a wideba...
by OvoEljay
Thu Aug 04, 2016 7:50 pm
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Re: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

The main problem is that your MAP sensor is not working. Additional things to look at is the o2 sensor operation, VTC (oil pressure, debris?) and TPS. It looks like you did overheat the engine (250F) so i swapped out the MAP sensor i had and got the car started and idling, but i tried to do a anoth...
by OvoEljay
Thu Aug 04, 2016 9:48 am
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Re: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

Thank you for the quick reply, I will get a new map sensor and I think I found the problem with over heating.. there was no overflow tank on my radiator. I will give and update once I replace the map sensor, and do another datalog. Thanks again
by OvoEljay
Wed Aug 03, 2016 8:46 pm
Forum: K-Pro Calibrations
Topic: Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG
Replies: 8
Views: 1627

Help! car not idling, and bogging down at mid revvs CHECK MY DATALOG

So let me start by syaing its a k24 frank with k24a2 block and z3 head swappedinto a 2005 em2 i initially had idling issues and found out the chain was strectched but since then i installed a brand new chanin and tensioner. now when i start the car it wont idle unless i keep my foot on the throttle,...
by OvoEljay
Wed Aug 03, 2016 8:39 pm
Forum: K-Pro / KManager
Topic: NOOB question Help Hooking up KPRO..
Replies: 2
Views: 666

Re: NOOB question Help Hooking up KPRO..

thanks.
by OvoEljay
Wed Jul 20, 2016 7:04 pm
Forum: K-Pro / KManager
Topic: NOOB question Help Hooking up KPRO..
Replies: 2
Views: 666

NOOB question Help Hooking up KPRO..

So when i finished my swap i tried the immobilizer bypass option.. i wired it with the harness and it worked fine. but no i purchased Kpro yesterday and im wondering if i should remove the "bypass" and re-attach the wires on the harness and then plug Kpro in? i searched for about an hour still cant ...
by OvoEljay
Sun Feb 22, 2015 4:54 pm
Forum: K-Pro Calibrations
Topic: K20a2 - TSX CAMS, PRB IM, ITR HEADER, 3" Exhaust.
Replies: 1
Views: 1400

Re: K20a2 - TSX CAMS, PRB IM, ITR HEADER, 3" Exhaust.

thanks for the help, cars been running great!
by OvoEljay
Sun Dec 28, 2014 9:59 pm
Forum: K-Pro Calibrations
Topic: K20a2 - TSX CAMS, PRB IM, ITR HEADER, 3" Exhaust.
Replies: 1
Views: 1400

K20a2 - TSX CAMS, PRB IM, ITR HEADER, 3" Exhaust.

Hey Guys i have EM2 k SWAP, im getting a tune early spring but for now i jus need something to run. ive used a couple from kmanager but i feel like i can can get a base map closer to my setup than the ones in kmanager..from someone out there, thanks looking to order a HR CAI very soon. K20A2 TSX INT...