Hondata

additional info: serial number is 47436. Software of kmanager is 4.4.4. Ordered kpro new from HPTautosport on March 13th 2018. Engine harness is a ktuned without charge harness (made one custom). Ktuned vss conversion adaptor. Flex fuel sensor installed.

Here is the .kal file and and some datalog files. I'm going to apologize about some of the recording because it was raining and couldn't get full traction.

I haven't got a hold of the tuner yet. I'll go do a few data logs and ill post it with the calibration. Ill add them shortly

My apologies for the late reply. I got the car tuned somewhere else and made 201whp and 142trq. The numbers are still a little bit of a disappointment. The car did run a heck lot better though. I got rid of that setup and went k series

Hello, I have a full k20a2 (04 to be exact) setup with full bolt-ons (skunk2 street manifold, 74mm tb, kpro v4, fic injectors). The car was dyno tuned and ran really well up until recently. The afr value used to read a high in the 13.0 range and dipped into the high 12.8 range. Now recently, I notic...

You can test this revised map of your tune out and see how it does. The only thing i did was lower timing and smooth the powerband out. Let me know how it drives. It would be best if you have a wideband and give me feedback of what your afr look like. Thanks, I'm gonna give it a shot and tell you h...

hmm... whoever your tuner is didn't even change your deadtime from 240cc to 440cc :/ Maybe someone with more experience can shine in but i prefer dialing in the deadtime of the injector in before even start tuning. Not sure why but your low cam right before vtec hit timing is bit higher then your v...

Hello, I am still having issues with the setup I have stated above. If anyone could take a look and guide me in the right direction that would be great! Thank you. Here is my tune attached.

whoknows? wrote:i may be mistaken but i dont see the download for the tune.

I'm going to post a screenshot of where the concern is when I get to my computer with the file. I had the file up and it had quite a few downloads but no suggestions for what could be the cause.

have you double checked your mechanical timing? Yeah, I check that multiple times and I had a mechanic look over the timing for me aswell. If you download the map and look at in smanager, you'll see a dip in the 4k rpm range for the ignition timing. I don't know if that is alright (I'm 100% sure th...

Hello, I have serious issues with my setup! Things do not add up at all! -gsr stock bore block -12.5 cp pistons -eagle rods, acl race bearing -arp head studs and rod bolts -new oil pump and many other parts -ctr head (ported) -farerra valves -replaced LMA's -brian crower springs and retainers -440cc...