Search found 25 matches

by jodin1234
Sat Aug 13, 2016 3:55 pm
Forum: K-Pro Calibrations
Topic: K20z1 RBC/I/HE
Replies: 2
Views: 2646

Re: K20z1 RBC/I/HE

You should see the available options in your version... See the highlight screenshot.

Click New Calibration... click the drop down menus and find your application and there should be different Z1 configs to test and begin tuning.
by jodin1234
Thu Aug 04, 2016 1:06 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

The car ran MUCH better in the after pull. Whatever you did there, you should keep it. The lack of high RPM MAP pressure was killing your power. I made a few adjustments. This should suit you either way. As far as the manifold difference, I dont know how much difference you will see pre-turbo, but ...
by jodin1234
Fri Jul 01, 2016 6:15 am
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Because of the EM2 swap requires cutting the radiator/core support to fit RBC or other aftermarket IM, I'm looking at the 06 TSX RBB because it turns down vs straight out.. Hopefully I can see performance differences from the PRB at the dyno with the benefits of making more room for an intercooler. ...
by jodin1234
Thu Jun 30, 2016 5:07 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Look at the MAP difference at the same RPM So ya think that is good enough to take to the dyno ?? If so, I want to swap to the RBB and do a few test pulls.... get a base for both mani's to take to the dyno, see where the power curve sits on each before choosing a turbo to compliment the RBB if it s...
by jodin1234
Thu Jun 30, 2016 4:23 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

keto06 wrote:Difference is night and day!
And to note: this was during the heat of the day... before I was doing my pulls after the sun went down...

**Sock still on, but now running out of engine compartment.
by jodin1234
Thu Jun 30, 2016 4:22 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Not really sure what all that means... That understanding part is on my to-do list, need to find a local guy I could stick to for a few months...
by jodin1234
Thu Jun 30, 2016 12:22 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Just as a test, take the socks off for a run and see if you pull the same pressure. Base #4 No Soc, routed CAI to fender well.JPG Also have a before & after 2nd gear pull routing the CAI to fenderwell.......... Butt Dyno felt upper RPM difference. Still have PRB mani... Will be doing that swap & te...
by jodin1234
Tue Jun 21, 2016 2:05 pm
Forum: K-Pro Calibrations
Topic: iso k20a3 vtec killer calibration
Replies: 3
Views: 3975

Re: iso k20a3 vtec killer calibration

"vtec killer" LoL... You kids and these amorphous terms. With those stock cams, you do not have what some numbnut began calling "Vtec Killer". There are a few manufactures that sell cams that only have Vtec lobes... essentially eliminating the vtec cut-on, because you're always running on vtec. (bt...
by jodin1234
Tue Jun 21, 2016 8:51 am
Forum: K-Pro Calibrations
Topic: What do you guys think of my map? EP3 K20A2 Turbo
Replies: 4
Views: 2364

Re: What do you guys think of my map? EP3 K20A2 Turbo

I'd say if you're planning on maintaining a boosted car, given a motor is nothing but a HUGE air pump, you could have an exhaust restriction preventing enough flow on the top end... But another variable, is the quality of the turbo you've purchased. In solving problems, it's always the best way to a...
by jodin1234
Tue Jun 21, 2016 7:15 am
Forum: K-Pro Calibrations
Topic: What do you guys think of my map? EP3 K20A2 Turbo
Replies: 4
Views: 2364

Re: What do you guys think of my map? EP3 K20A2 Turbo

Personally,
I would not run a turbo with anything less than 70mm exhaust.... and I'm just guessing(given no brand name turbo given) you may be having less than advertised performance from ebay turbo.
by jodin1234
Sat Jun 18, 2016 4:00 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

While I'm fixing a few things, cosmetic & necessary... 1. Securing the routing of the shifter cables.(Don't wanna burn up on exhaust) 2, Protecting & insulating the 00awg batt cable routed to trunk & adding exhaust heat shielding out of an accord. 3. Replacing the PRB Mani with RBB and finding some ...
by jodin1234
Sat Jun 18, 2016 2:32 pm
Forum: K-Pro Calibrations
Topic: iso k20a3 vtec killer calibration
Replies: 3
Views: 3975

Re: iso k20a3 vtec killer calibration

anybody? Have you tried any of the base k20a2 maps provided with Kpro ?? OR... have you tried the base a2 with Toda header, Intake & Exhaust ? OR.... have you tried the pinned thread titled.... "05-06 RSX Type S - AEM cold air intake, Invidia Race header" ?? As your initial request stated.... I've ...
by jodin1234
Mon Jun 13, 2016 7:16 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Yeah ??

I know it's some temporary shade tree engineering, but it keeps the dirt out and flows... I'll try it ...
by jodin1234
Mon Jun 13, 2016 6:30 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Ahhh HAAA!!
Atlanta is relatively higher up than most... 1k ft above sea level..
by jodin1234
Mon Jun 13, 2016 6:08 pm
Forum: K-Pro Calibrations
Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
Replies: 31
Views: 11018

Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc

Yeah, I'm shifting around 7-7400 because ya can just hear/feel it give out.. So the IAT is 100% the cause or should I be digging around for something else?