Search found 9 matches

by Lerlo
Sat Sep 09, 2017 9:17 am
Forum: FlashPro Manager
Topic: High K.Count.3 on 2.8.2.0
Replies: 4
Views: 774

Re: High K.Count.3 on 2.8.2.0

Thanks Hondata, My counts are all within 2000-3500 (high load, low rpm) so I will retard the ignition and give it a try. My tappets are a little noisy so Ill get that adjusted as well. I read you loud and clear on the knock control parameters you have explained. So knock count will not change, howev...
by Lerlo
Sat Sep 09, 2017 7:43 am
Forum: FlashPro Manager
Topic: High K.Count.3 on 2.8.2.0
Replies: 4
Views: 774

Re: High K.Count.3 on 2.8.2.0

Hi Hondata, Thanks for your reply. Ive got an FN2, I think its just coincidence that I had higher knock count upon update. I back tracked datalogs 2 months ago and found high knock values as well. Its funny that it came and gone. One question though: I noticed everytime there is a K.count, knock con...
by Lerlo
Fri Sep 08, 2017 8:02 am
Forum: FlashPro Manager
Topic: High K.Count.3 on 2.8.2.0
Replies: 4
Views: 774

High K.Count.3 on 2.8.2.0

Hi,

Is anyone experiencing high K.count.3 on 2.8.2?

I realised after the update, my k.count.3 is really high, like 30+ when the same map was 0-2 on the old version.

All the other cylinders read 0 though.

This has caused my knock control to be 90% on 98(RON)
by Lerlo
Sat Sep 02, 2017 6:34 am
Forum: FlashPro Manager
Topic: WOT adjustment table
Replies: 9
Views: 2281

Re: WOT adjustment table

Hi everyone,

Just wondering why there isn't any response for my posts. Hello, how's everybody doing?
by Lerlo
Thu Aug 31, 2017 6:54 am
Forum: FlashPro Calibrations
Topic: Basemap for stock FN2 MAP fueling table
Replies: 0
Views: 990

Basemap for stock FN2 MAP fueling table

Hi all,

It seems when switching the speed/density fueling tables, my afr runs all over.

I dont think the tables that come with Hondata is tailored to the car.

Was wondering if anyone here has base MAP fueling tables for the FN2.

Or how would I be able to obtain one.

Thanks,
Leon
by Lerlo
Thu Aug 31, 2017 6:50 am
Forum: Civic Type R 2007-2011 European FN2
Topic: can somebody check my cal please
Replies: 4
Views: 1436

Re: can somebody check my cal please

It seems you are using MAP to determine WOT. For me at even 40% the MAP is above 0.7 bar. As such you are mostly driving in WOT. Your Low WOT adjustment table, why did you richen it to 11.98? That's way too rich. Your High WOT adjustment table, you leaned it to 12.98? That essentially keeps you at c...
by Lerlo
Thu Aug 31, 2017 6:32 am
Forum: FlashPro Manager
Topic: WOT adjustment table
Replies: 9
Views: 2281

WOT adjustment table

Hi, can somebody tell me if I understand correctly the WOT adjustment tables? Im have a FN2 type R - The FN2 from factory are tuned via the AFM - There are 3 modes the ECU can be in, 1- Closed Loop, 2 - Closed Loop WOT & 3- Open Loop - Close loop AFR are set via "Closed Loop Target Lambda" and if no...
by Lerlo
Tue Aug 29, 2017 7:23 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: WOT Lambda Adjustment Table
Replies: 2
Views: 1917

Re: WOT Lambda Adjustment Table

Spunkster wrote:
Tue Aug 29, 2017 11:20 am
You cannot expect to just switch to tune via MAP tables and have it run exactly the same as it did on the AFM. You must tune on the dyno to get the AF correct.
Ah, thanks for confirming that. It would be a big job then, unless someone has a rough MAP fuel table for a stock car for me.. ☺️
by Lerlo
Tue Aug 29, 2017 10:16 am
Forum: Civic Type R 2007-2011 European FN2
Topic: WOT Lambda Adjustment Table
Replies: 2
Views: 1917

WOT Lambda Adjustment Table

Hi everybody, I am new to hondata, have had my Flashpro and messing with it for about 3 months now. Here is what I understand from reading numerous articles/posts on the internet on the matter and my experiences. Do let me know if I am wrong. - The FN2 from factory are tuned via the AFM - There are ...