Search found 7 matches

by 786Nazir
Thu Dec 27, 2018 4:14 am
Forum: K-Pro Calibrations
Topic: Detailed Problem, Any help appreciated.
Replies: 5
Views: 2249

Re: Detailed Problem, Any help appreciated.

Slight update. So i attached a vacuum gauge to check for exhaust restriction, it came back with a clean bill of health in all test. Checked the fuel pressure and performed a leak test all come back positive and within spec. (45 psi constant). I am gonna try replacing the injectors to see if that hel...
by 786Nazir
Mon Oct 29, 2018 7:30 pm
Forum: K-Pro Calibrations
Topic: Detailed Problem, Any help appreciated.
Replies: 5
Views: 2249

Re: Detailed Problem, Any help appreciated.

Hi, Thanks for the reply. I think the map has had some dyno time by another owner but was remained in a non aggressive state. (back up or for friends). I will get it dyno tuned at some point. The thought of a blocked cat had crossed my mind along with a injector/fuel rail problem. I am gonna invest ...
by 786Nazir
Sun Oct 28, 2018 5:26 pm
Forum: K-Pro Calibrations
Topic: Detailed Problem, Any help appreciated.
Replies: 5
Views: 2249

Re: Detailed Problem, Any help appreciated.

Data log 4 and 5 are too big for standard upload but its pretty much the same as these.
by 786Nazir
Sun Oct 28, 2018 5:10 pm
Forum: K-Pro Calibrations
Topic: Detailed Problem, Any help appreciated.
Replies: 5
Views: 2249

Re: Detailed Problem, Any help appreciated.

Data logs Zip
by 786Nazir
Sun Oct 28, 2018 5:08 pm
Forum: K-Pro Calibrations
Topic: Detailed Problem, Any help appreciated.
Replies: 5
Views: 2249

Detailed Problem, Any help appreciated.

Hi everyone, I hope someone can participate in this. I frigging love this car and this problem is making me pull my hair out Car is a UK Civic Type R. K20a2 Meticulous maintained service schedule. I hardly ever abuse the engine Stock exhaust. Gruppe M Intake. Hondata Kpro Ecu - Running a Slightly mo...
by 786Nazir
Tue Sep 26, 2017 6:41 pm
Forum: K-Pro Calibrations
Topic: Question for hondata regarding factory calibration
Replies: 2
Views: 1148

Re: Question for hondata regarding factory calibration

Thank you Martian Leader for your reply. (ack ack ack) That is a good point and i think ultimately that will be the end target. I have compared the k manager stock kal and the tuned kal most of the deferences seem to be in the ignition and cam angles at high speed, high load tables, which is good. T...
by 786Nazir
Thu Sep 14, 2017 7:43 pm
Forum: K-Pro Calibrations
Topic: Question for hondata regarding factory calibration
Replies: 2
Views: 1148

Question for hondata regarding factory calibration

I will try to keep this simple. Car is a Honda civic stock Euro (England) Type R. Intending to purchase a used k pro version 3 board installed on a pra ecu which is the correct type and hopefully not a risk. (Red Board?) Strangely Iv been playing around with the k manager for years in my free time a...