Search found 60 matches

by Awsomsauce
Sun Jan 14, 2024 4:37 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

Re: The new 5 tune selectable feature

Also why was the Tracing jumping from table to table? They have different boost levels from one another?
by Awsomsauce
Sun Jan 14, 2024 4:21 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

Re: The new 5 tune selectable feature

Also the car was full throttle when I did the two sets of pulls on the datalog but I only got like 40-45% instead of 100% the car built boost up to 4 psi then dropped to -4 then ramped back up. I reverted back to my previous to before using the multi tune and the car ran perfectly. I’ll turn off the...
by Awsomsauce
Sun Jan 14, 2024 5:07 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

Re: The new 5 tune selectable feature

so i tried using this feature and its bugging out. its jumping from tune to tune. it was set to tune table 2 but as you can see from the log it jumps from 2 to 5 to 3 etc.
by Awsomsauce
Sun Oct 08, 2023 7:03 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

Re: The new 5 tune selectable feature

Naw it makes a huge difference. With the torque limited feature where you can set the torque limit for comfort and sport mode it creates problems. A long time ago I asked if you guys could make a second maf scaling available. If I tuned the maf to the limited torque table when I went sport mode that...
by Awsomsauce
Fri Oct 06, 2023 3:25 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

Re: The new 5 tune selectable feature

So it’s only boost by gear and traction control settings. Changing the boost would require different maf scaling for fuel and knock ignition limits to reduce the risk of knock. Will these be available to change with each boost map soon?
by Awsomsauce
Thu Oct 05, 2023 3:38 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: The new 5 tune selectable feature
Replies: 9
Views: 38462

The new 5 tune selectable feature

Do you have to keep the flashpro connected to the car to change the tunes or is it stored once you’ve flashed the car.
by Awsomsauce
Mon May 15, 2023 9:38 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: U0155 can trouble code
Replies: 5
Views: 1699

Re: U0155 can trouble code

No that’s not the issue with returning to stock. The car is too modified to go back to stock. But an update, when I last flashed the car to clear the code I removed my flashpro from the com port and left the car alone overnight. This afternoon I went out and drove the car. The issue stopped. No code...
by Awsomsauce
Mon May 15, 2023 1:06 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: U0155 can trouble code
Replies: 5
Views: 1699

Re: U0155 can trouble code

Yes, I’ve reflashed the car to clear the code but it came back again. Plus I’m im having intermittent connection issues with the Hondata app on the phone. That could just be Bluetooth issues. I was reading it may be battery related, I haven’t changed it in years.
by Awsomsauce
Sat May 13, 2023 5:27 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: U0155 can trouble code
Replies: 5
Views: 1699

U0155 can trouble code

My si just threw this code this afternoon. I can’t return the car back to stock to have a dealership look at the car. Is there any help Hondata can recommend ?
by Awsomsauce
Sat Jan 08, 2022 1:52 am
Forum: s300 / SManager
Topic: Ecu will not connect
Replies: 3
Views: 1266

Re: Ecu will not connect

Issue resolved. I took the ecu out of the car and into the house and connected it to my laptop while connected to the internet. The firmware updated and the ecu now has all greens on the s300 information window from top to bottom. Next is to put it back in the car.
by Awsomsauce
Fri Jan 07, 2022 9:14 pm
Forum: s300 / SManager
Topic: Ecu will not connect
Replies: 3
Views: 1266

Ecu will not connect

Having the following issue come up when I connect to my ecu S300 information ❌ s300 ✅ Version 3 ✅ Processor NXP ❌ Status: Bootloader ❌ Ram test: failed ❌ datalogging memory test: failed ❌ flash memory: 0 MB i serial no: xxxxx i bluetooth No Car is in limp mode, ecu will not connect to laptop
by Awsomsauce
Fri Jul 09, 2021 12:16 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Fuel actual not following fuel cmd
Replies: 2
Views: 1335

Fuel actual not following fuel cmd

All of my fuel is not meeting what’s being commanded on the tables. My WOT and lean best torque tables are commanding 11.18 afr targets and my car is absolutely set against reaching that goal. It hits 11.7-11.8 and that’s it. I have an aem wideband sensor installed in the second o2 bung on the down ...
by Awsomsauce
Sun Jun 27, 2021 9:09 am
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 365
Views: 453575

Re: FlashPro Requests

Can you make two maf sensor scales. When you turn on the Hondata mode the second maf scale will turn on to run with the torque table limit tuned into the sport mode. And when you turn off sport mode the maf scale will return to the other torque limit scaling.
by Awsomsauce
Mon Mar 29, 2021 3:24 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Cell tracing issues
Replies: 2
Views: 1101

Re: Cell tracing issues

Also there’s no tracing in the WOT table as well. Thank you!
by Awsomsauce
Sun Mar 28, 2021 10:45 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Cell tracing issues
Replies: 2
Views: 1101

Cell tracing issues

In the low temp and high temp target fuel pressure maps tables the tracing stays at the very bottom even though in sensors you can see the AFM.c levels change. The tracing doesn’t follow in the 2d or 3D table