Search found 60 matches
- Sun Jan 14, 2024 4:37 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
Re: The new 5 tune selectable feature
Also why was the Tracing jumping from table to table? They have different boost levels from one another?
- Sun Jan 14, 2024 4:21 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
Re: The new 5 tune selectable feature
Also the car was full throttle when I did the two sets of pulls on the datalog but I only got like 40-45% instead of 100% the car built boost up to 4 psi then dropped to -4 then ramped back up. I reverted back to my previous to before using the multi tune and the car ran perfectly. I’ll turn off the...
- Sun Jan 14, 2024 5:07 am
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
Re: The new 5 tune selectable feature
so i tried using this feature and its bugging out. its jumping from tune to tune. it was set to tune table 2 but as you can see from the log it jumps from 2 to 5 to 3 etc.
- Sun Oct 08, 2023 7:03 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
Re: The new 5 tune selectable feature
Naw it makes a huge difference. With the torque limited feature where you can set the torque limit for comfort and sport mode it creates problems. A long time ago I asked if you guys could make a second maf scaling available. If I tuned the maf to the limited torque table when I went sport mode that...
- Fri Oct 06, 2023 3:25 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
Re: The new 5 tune selectable feature
So it’s only boost by gear and traction control settings. Changing the boost would require different maf scaling for fuel and knock ignition limits to reduce the risk of knock. Will these be available to change with each boost map soon?
- Thu Oct 05, 2023 3:38 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: The new 5 tune selectable feature
- Replies: 9
- Views: 38686
The new 5 tune selectable feature
Do you have to keep the flashpro connected to the car to change the tunes or is it stored once you’ve flashed the car.
- Mon May 15, 2023 9:38 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: U0155 can trouble code
- Replies: 5
- Views: 1713
Re: U0155 can trouble code
No that’s not the issue with returning to stock. The car is too modified to go back to stock. But an update, when I last flashed the car to clear the code I removed my flashpro from the com port and left the car alone overnight. This afternoon I went out and drove the car. The issue stopped. No code...
- Mon May 15, 2023 1:06 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: U0155 can trouble code
- Replies: 5
- Views: 1713
Re: U0155 can trouble code
Yes, I’ve reflashed the car to clear the code but it came back again. Plus I’m im having intermittent connection issues with the Hondata app on the phone. That could just be Bluetooth issues. I was reading it may be battery related, I haven’t changed it in years.
- Sat May 13, 2023 5:27 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: U0155 can trouble code
- Replies: 5
- Views: 1713
U0155 can trouble code
My si just threw this code this afternoon. I can’t return the car back to stock to have a dealership look at the car. Is there any help Hondata can recommend ?
- Sat Jan 08, 2022 1:52 am
- Forum: s300 / SManager
- Topic: Ecu will not connect
- Replies: 3
- Views: 1268
Re: Ecu will not connect
Issue resolved. I took the ecu out of the car and into the house and connected it to my laptop while connected to the internet. The firmware updated and the ecu now has all greens on the s300 information window from top to bottom. Next is to put it back in the car.
- Fri Jan 07, 2022 9:14 pm
- Forum: s300 / SManager
- Topic: Ecu will not connect
- Replies: 3
- Views: 1268
Ecu will not connect
Having the following issue come up when I connect to my ecu S300 information ❌ s300 ✅ Version 3 ✅ Processor NXP ❌ Status: Bootloader ❌ Ram test: failed ❌ datalogging memory test: failed ❌ flash memory: 0 MB i serial no: xxxxx i bluetooth No Car is in limp mode, ecu will not connect to laptop
- Fri Jul 09, 2021 12:16 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: Fuel actual not following fuel cmd
- Replies: 2
- Views: 1344
Fuel actual not following fuel cmd
All of my fuel is not meeting what’s being commanded on the tables. My WOT and lean best torque tables are commanding 11.18 afr targets and my car is absolutely set against reaching that goal. It hits 11.7-11.8 and that’s it. I have an aem wideband sensor installed in the second o2 bung on the down ...
- Sun Jun 27, 2021 9:09 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 365
- Views: 455476
Re: FlashPro Requests
Can you make two maf sensor scales. When you turn on the Hondata mode the second maf scale will turn on to run with the torque table limit tuned into the sport mode. And when you turn off sport mode the maf scale will return to the other torque limit scaling.
- Mon Mar 29, 2021 3:24 pm
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: Cell tracing issues
- Replies: 2
- Views: 1107
Re: Cell tracing issues
Also there’s no tracing in the WOT table as well. Thank you!
- Sun Mar 28, 2021 10:45 am
- Forum: Civic 2016+ 1.5 Turbo Americas/Asia
- Topic: Cell tracing issues
- Replies: 2
- Views: 1107
Cell tracing issues
In the low temp and high temp target fuel pressure maps tables the tracing stays at the very bottom even though in sensors you can see the AFM.c levels change. The tracing doesn’t follow in the 2d or 3D table