If possible :
VTEC status,
open/closed loop status
For external datalogging purpose that could be awesome !
Search found 16 matches
- Wed Oct 23, 2019 3:25 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
- Tue Oct 22, 2019 9:15 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Is it possible to include "Mil status" in the protocols ?
that would be great since i have only a CAN interface between the dashboard and kpro board
that would be great since i have only a CAN interface between the dashboard and kpro board
- Tue Oct 22, 2019 9:13 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
I use approximations over a specific range that i choose, no Steinhart-Hart. Ethanol/Fuel temp is already included in your Motec SDL/ADL protocol that i used (i wanted the 8 analog inputs, and the AIM can protocol has only 4 analogs inputs), but not included in the AIM reading protocol i developed t...
- Wed Oct 09, 2019 3:30 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Also, i got some questions about the fact that the Ethanol content and Fuel temperature is not included in my protocol : i can add them but i may ask a little contribution on the time spent for this, and if you want more help on how to install other custom sensors if you're not able to calculate the...
- Wed Oct 09, 2019 3:24 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Another example with the AEM 30-2012 sensor :
- Wed Oct 09, 2019 3:21 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Example of adding a custom temperature sensor on a Kpro, how to wire it, how to create the Kpro custom input, and the math channel for the AIM : 1) EGT sensor : EGT sensors are for most of them k-type sensors, that requires amplifications to be read. I choose to use a RTD sensor supplied by AEM (AEM...
- Tue Oct 08, 2019 10:10 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Example of display with this protocol :
- Tue Oct 08, 2019 10:04 am
- Forum: K-Pro / KManager
- Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
- Replies: 21
- Views: 7571
Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Hi, since i got lot of PM/emails asking for my custom AIM MXS CAN protocol for the KPRO V4, here is my version and documentation : The Kpro can protocol included in the AIM library has some limitations : - only 2 analog inputs returned, for specific sensors (not documented) - no lambda value returne...
- Tue Oct 01, 2019 11:31 am
- Forum: K-Pro / KManager
- Topic: AIM MXS Strada and Kpro Oil Pressure
- Replies: 13
- Views: 4856
Re: AIM MXS Strada and Kpro Oil Pressure
Sorry i was not informed of the private message via email,
i'm sending a PM to all who asked so you can send me an email and i can send the can protocol with the setup i'm using
i'm sending a PM to all who asked so you can send me an email and i can send the can protocol with the setup i'm using
- Sun Jun 02, 2019 8:53 am
- Forum: K-Pro / KManager
- Topic: VTC issues code P0010
- Replies: 15
- Views: 7458
Re: VTC issues code P0010
Had the same on my engine, the intake cam was physically fixed to 0° because the previous ECU managing the engine was not VTC ready (and intake cam was 20° off on the timing chain to simulate VTC so i had another code also).
So check under the pulley / inspect the mecanism ?
So check under the pulley / inspect the mecanism ?
- Wed May 29, 2019 11:34 am
- Forum: K-Pro / KManager
- Topic: AIM MXS Strada and Kpro Oil Pressure
- Replies: 13
- Views: 4856
Re: AIM MXS Strada and Kpro Oil Pressure
I developed a custom kpro can protocol for the AIM MXS Strada (non strada also). I added the Lambda reading since AIM decided to ignore this stream in the protocol. The 8 analog inputs are returned as raw mv values, and i added my calculations using Math channels for my custom sensors (fuel pressure...
- Thu Mar 07, 2019 6:22 am
- Forum: K-Pro / KManager
- Topic: Fuel/Ignition compensation for AIT and ECT
- Replies: 1
- Views: 1067
Fuel/Ignition compensation for AIT and ECT
Hi, lets say i have compensation for fuel and ignition for AIT, and the highest cell is 175°F. What happens at 200°F ? Interpolation from the 175°F value (so ~1.15x more), or it takes the 175°F value because it's the maximum ? The Kmanager documentation does not explain this (or maybe i did not noti...
- Thu Jan 03, 2019 11:54 am
- Forum: K-Pro / KManager
- Topic: ECU grounding with insulated ECU casing
- Replies: 2
- Views: 1097
Re: ECU grounding with insulated ECU casing
Oh ok, i was thinking the ECU needed to be grounded
Thanks
Thanks
- Wed Jan 02, 2019 7:09 am
- Forum: K-Pro / KManager
- Topic: ECU grounding with insulated ECU casing
- Replies: 2
- Views: 1097
ECU grounding with insulated ECU casing
Hi, i'm running a K-Pro in an Ariel Atom, with rigid engine mounts : so i need to insulate the ECU case from the chassis with silent blocks to prevent it from breaking due to vibrations. I'll bolt a ground wire from the chassis to one of the ECU cover bolts, but i'm wondering if this ground wire has...
- Thu Aug 30, 2018 12:24 pm
- Forum: Applications
- Topic: PRC Ecu - how to identify pre-facelift or facelift ?
- Replies: 2
- Views: 2600
Re: PRC Ecu - how to identify pre-facelift or facelift ?
Thanks for your help Spunkster :)
Have a good day
Have a good day