Search found 110 matches

by GTMcoupe
Sat Sep 23, 2017 1:17 am
Forum: s300 / SManager
Topic: Out of date message
Replies: 8
Views: 3779

Re: Out of date message

As others, I have been caught out by this. I Have not used the car for a couple of months go to an event take the laptop to datalog etc, and get locked out and cannot do anything until I update. Leave the warning message, but do not lock out the software please. Hondata is better than this, its so i...
by GTMcoupe
Fri Nov 11, 2016 5:42 am
Forum: s300 / SManager
Topic: 5v power supply
Replies: 2
Views: 1735

Re: 5v power supply

Thanks for the info its for one of my winter projects

Neil
by GTMcoupe
Fri Nov 04, 2016 10:04 am
Forum: s300 / SManager
Topic: 5v power supply
Replies: 2
Views: 1735

5v power supply

I would like to add and log an additional sensor through my S300. I can see that both the TPS and MAP sensors are supplied with 5v via two different pins. Are they supplied by the same 5v suppply internally from the ECU or two separate supplies? What is the total available load of the 5V supply, so ...
by GTMcoupe
Sat Oct 29, 2011 3:44 am
Forum: s300 / SManager
Topic: Soft Rev. Limiter. How to fix with S300 ?
Replies: 3
Views: 4275

Re: Soft Rev. Limiter. How to fix with S300 ?

A simple thing you can do is lift slightly, then you have no concerns of high egts and running on the limiter.

Just a thought.
by GTMcoupe
Thu Jun 02, 2011 5:19 am
Forum: s300 / SManager
Topic: SManager on Adroid OS?
Replies: 3
Views: 2258

Re: SManager on Adroid OS?

What about on say a Windows Phone would this be possible? or an app developed for such purpose?

West
by GTMcoupe
Wed Nov 10, 2010 5:49 am
Forum: s300 / SManager
Topic: Smanager wish list
Replies: 150
Views: 164460

When Datalogging direct to a lap top the datalog is automatically saved, i.e with a file name such as date/time or incremental in a tempory folder. I was on the Dyno this weekend datalogged a pull but unfortantly forgot to save the datalog before turning off the lap top by the time I realised I hadn...
by GTMcoupe
Thu Aug 26, 2010 4:57 am
Forum: s300 / SManager
Topic: Injectors go to zero when engine is running...
Replies: 5
Views: 2717

I cannot look at your datalog here [at work] but the injectors shut off on overrun, have you got the tps set up correctly? and the settings for the overrun setup correctly.

West
by GTMcoupe
Tue Aug 24, 2010 1:58 pm
Forum: s300 / SManager
Topic: Smanager wish list
Replies: 150
Views: 164460

Another one from me, As I run a Honda in a Kit car and it has rather small wheels, Hondata reads approx 15% higher on speed. A potential problem I see is the maximum wheelspeed value for example nitrous control. This apears to max out at 157mph. I could be getting close to this in a years time, curr...
by GTMcoupe
Sat Aug 07, 2010 3:18 am
Forum: s300 / SManager
Topic: Overrun
Replies: 6
Views: 3182

The overrun injector shut off is adjaustable,

Couldnt you just set that to 0% and a very large delay figure thereby bypassing that feature. From a read of the help file it would apear to be possible.

West
by GTMcoupe
Thu Jun 17, 2010 5:12 am
Forum: s300 / SManager
Topic: How exactly do you part throttle tune?
Replies: 2
Views: 1945

Re: How exactly do you part throttle tune?

codenamezero wrote: I was trying to look for some setting perhaps i could stop it from logging if the throttle position is at 0... but i don't think such option exists...
..
Yes it does you can set minimum and maximum TPS condition along with rpms, speed and load for the sensor overlay.

West
by GTMcoupe
Thu May 13, 2010 3:06 pm
Forum: s300 / SManager
Topic: Smanager wish list
Replies: 150
Views: 164460

Injector Test mode. Applicable to 1 or all 4 injectors Megasquirt ECU system gives you this option where you can set the pulse width of the injector, and set an output interval, for example 1ms pulse every 1000ms. allows to test the injectors etc but I found another proposed use for it to help deter...
by GTMcoupe
Mon May 10, 2010 9:47 am
Forum: s300 / SManager
Topic: S300 Failing to boot up on engine start?
Replies: 2
Views: 2185

What sort of voltage would cause a problem? Checked the voltage and looks like I do have a small voltage drop from the battery to the ECU to investigate but its only small, but obviously will be worse when cranking. Going to invest in a new main battery cable in the next few weeks. Voltage drop is a...
by GTMcoupe
Fri May 07, 2010 4:55 am
Forum: s300 / SManager
Topic: S300 Failing to boot up on engine start?
Replies: 2
Views: 2185

S300 Failing to boot up on engine start?

I Get an Intermitant problem which has been occuring ever since I started running S300 some three years ago, sometimes I can go for months and not expriance it, other times it will happen a couple of times a day. Turn ignition on, Fuel pump primes as normal, Start the car and a constant Cel, and eng...
by GTMcoupe
Tue Apr 13, 2010 2:16 pm
Forum: s300 / SManager
Topic: Smanager wish list
Replies: 150
Views: 164460

Hondata wrote:We read it.

8)
by GTMcoupe
Sat Apr 03, 2010 1:34 am
Forum: s300 / SManager
Topic: jerk while in freeway
Replies: 47
Views: 21735

I ran 1.4.3 and 1.4.4 fine as an every day driver myself, 1.4.4 had an update I questioned hondata for on the behaviour on the nitrous 3 output not saving correctly on 1.4.3 and they updated it just before a drag meet for me and I used 1.4.4 to great effect. Might be worth going through every option...