Hondata

On the FK8, default slip value is about 3%. In videos online I see 6%. If you happen to remember when you tested how these values came about? At high slip level values wouldn’t the threshold to activate OE TC be more likely?

Trying to answer my own Qs, I think now I need to modify the Throttle torque to further limit things -- BUT i need to get clean runs without TC coming on too. So in a way I need to go back and retest. :-P

Looking at all my logs, every time fuel pump hits 100% i have TC engaged.
It's a bit frigid where I am and I'm not surprised my tires aren't hooking up _at all_.
Is this expected/normal? Or should I just basically never see the fuel pump hit this high even with TC?

Ok, here is my latest log.

I keep hitting the fuel pump limit, and I've been lowering the air charge. How much lower should I go (in 4500 rpm for instance I've lowered -8%)? Is there anything else I should change?

https://1drv.ms/u/s!ApIxmUp-3zbagmNZiC6 ... O?e=tso8ab

Thanks, will be testing these changes soon!

Correction, Note 1 should have read:

"Note 1: I had lowered at 4500-5500 and saw the logs, hit 100% fuel again and saw that maybe starting at 4000 would help more"

Using base 93 map, - lowered increased AFM 5% in the suggested voltage range. - lowered aircharge 5% over the range 4000 - 5500 Note 1: I had lowered at 4500-5000 and saw the logs, hit 100% again and saw that maybe at 4000 would help Note 2: At the end of the log is me driving into a gravel driveway...

Had help from a fellow civicx member, did the two adjustments. Will report back when I log again.

And aircharge, I take it thats "Air Charge Limit" under "Boost Control"?

Thanks!

Will do and will let you know how it turns out!

Edit: for AFM is that Fuel > Fuel Pressure (normal) ??

Help Reading Logs - 93 Base Tune - Knock, Pump Duty Hi all, looking for some help reading these logs. Very cold day today, maybe 10-15 minutes from startup. Only 93 in the tank. I see there is knock retard on #4 and at one point I saw 100% fuel. Good? Bad? From reading the threads I see that it's ac...

So are there new recommended values or is base map values for TC ok?

Hi, I recently purchased a FlashPro. While I'm waiting for it to be shipped I had a few questions. Regarding the traction control, 1. How is it enabled (via the cruise control button?)? 2. Does VSA need to be disabled? 3. Can VSA be 'on' while Hondata traction control is also enabled? If so, does it...