Search found 13 matches

by grog
Mon Sep 24, 2007 12:35 pm
Forum: s100/s200
Topic: shiftlight broke
Replies: 3
Views: 3650

my shiftlight was working fine, now it is not. it has been bent around alot due to taking the cluster apart many times. i have removed and tested the light and the led is not working. I require a new led. but i cant find any info on what to get. i dont need help with instalation, is been in and work...
by grog
Sat Sep 22, 2007 1:00 pm
Forum: s100/s200
Topic: which rom should i use ?
Replies: 2
Views: 3097

okay ive figured it out i believe, the p72 is the GSR only.
correct me if i am wrong.
by grog
Fri Sep 21, 2007 9:25 pm
Forum: s100/s200
Topic: shiftlight broke
Replies: 3
Views: 3650

shiftlight broke

my led shiftlight stoped working, it was bent around one time too many. i need to buy a replacement led or can anybody tell me what kind of 5mm led to look for. also is the resister necesary? and if so is it on the positive or negative?
by grog
Fri Sep 21, 2007 3:43 pm
Forum: s100/s200
Topic: which rom should i use ?
Replies: 2
Views: 3097

which rom should i use ?

hello, i,ve got a p28 ecu (s200) running a jdm 94 gsr motor.

my question is, when selecting standard tables from a different ecu is the p72 jdm ( 92-95 jdm b18c integra) for the type R or the GSR or both?
or is the p72 US (92-95 b18c GSR integra) what i should use?

thanks
by grog
Wed May 24, 2006 8:12 am
Forum: Non-Hondata
Topic: pr4 cel ignition input signal
Replies: 1
Views: 1658

pr4 cel ignition input signal

My 91 ef dx has a 91 Ls motor and a pr4, its throwing a cel, 15 the ignition input signal. I'm not exactly sure where to look for this problem.
any help is welcome.
thanks
by grog
Tue Apr 25, 2006 8:13 pm
Forum: s100/s200
Topic: shift light install question
Replies: 8
Views: 2978

Okay its working now. sweet.

so it was a wiring issue, the snaplock connector had cut the wire to shreds the first time I connected it, but i didnt notice till now. so I soldered it, and i'm on my way.
thanks
by grog
Mon Apr 24, 2006 5:15 pm
Forum: s100/s200
Topic: shift light install question
Replies: 8
Views: 2978

Yes, thats what I use for now. yes the cels does work as the shift light and I can set it. the only response from the LED light was a dim light at startup, but it was just about one second long, where as the cel lights up for 5 seconds or so. They are suppost to match up. that was the only time I go...
by grog
Sat Apr 22, 2006 7:55 pm
Forum: s100/s200
Topic: shift light install question
Replies: 8
Views: 2978

i followed the manual, i checked it about 4 times. I got pretty famiar with it , i connected to the a13 earth and a25, i swithced the wires i played around with it quite a bit . what setup in the settings in the interface box are you refering to? I have the shift light setup to work the cel, I can s...
by grog
Wed Apr 19, 2006 10:08 pm
Forum: HondaLogger Software
Topic: I Cant Get The Ecu Info To Open Up
Replies: 3
Views: 9837

Okay, I got it connected!
by grog
Wed Apr 19, 2006 10:04 pm
Forum: s100/s200
Topic: shift light install question
Replies: 8
Views: 2978

its the s200 system, with the supplied led light.
by grog
Sat Apr 15, 2006 1:18 pm
Forum: s100/s200
Topic: shift light install question
Replies: 8
Views: 2978

shift light install question

so I hooked up the shift light using the manuals instructions, I Tried my best to wire it across the cel and then to the jumper/ecu end it would blink at start up but not as a shift light. the cel comes on as the shift light every time so it works. I took it to an electrical place to get wiring diag...
by grog
Mon Apr 10, 2006 5:36 pm
Forum: HondaLogger Software
Topic: I Cant Get The Ecu Info To Open Up
Replies: 3
Views: 9837

my serial code is 3706.
Ill wait till I get My keyspan adapter. I just wanted to be prepared.
thanks
by grog
Sun Apr 09, 2006 2:14 pm
Forum: HondaLogger Software
Topic: I Cant Get The Ecu Info To Open Up
Replies: 3
Views: 9837

I Cant Get The Ecu Info To Open Up

I've had my s200 for a while now, i love It. I just tried to hookup the hondalogger, and I realized The radio shack adapter wont work, Iam trying to find a keyspan adapter. I also found out I need a code to Unlock this feature I thought it was this four digit code 3706, but when I try to open the ec...