Search found 191 matches
- Thu Jul 02, 2015 5:09 pm
- Forum: K-Pro / KManager
- Topic: k20z3 turbo suddenly lean only in 5th gear
- Replies: 3
- Views: 2490
Re: k20z3 turbo suddenly lean only in 5th gear
That's odd. I've ran these files on 3 separate computers with no issues. All of them are up to date as well.
- Thu Jul 02, 2015 4:36 pm
- Forum: K-Pro / KManager
- Topic: k20z3 turbo suddenly lean only in 5th gear
- Replies: 3
- Views: 2490
Re: k20z3 turbo suddenly lean only in 5th gear
I've looked all over this thing. It seems it only started doing this after the latest software update. Based off my s300 experience, I've checked for rev limiter per gear and speed limiter, was not able to find anything of the like. Would really like to get this resolved by tomorrow evening for the ...
- Wed Jul 01, 2015 11:09 pm
- Forum: K-Pro / KManager
- Topic: k20z3 turbo suddenly lean only in 5th gear
- Replies: 3
- Views: 2490
k20z3 turbo suddenly lean only in 5th gear
Had a chance to test and tune the car tonight, working on getting the boost controller settings properly set up. The setup is a stock k20z3 with pt6262 @19psi dynotuned by slowmotion. At all our prior test and tune nights, we have never encountered this weird issue. At the top of 5th gear around 750...
- Wed Jun 17, 2015 5:47 pm
- Forum: Traction Control with KPro
- Topic: Speed sensor type issue
- Replies: 6
- Views: 16191
Re: Speed sensor type issue
Everything works great, just need to fiddle with it and learn it more. Feels strong off the line and through 2nd gear on street tires with 508whp. Thank you for the help with the wiring and such.
- Sun May 17, 2015 9:57 am
- Forum: Traction Control with KPro
- Topic: Speed sensor type issue
- Replies: 6
- Views: 16191
Re: Speed sensor type issue
Finally got around to wiring this up. With the ABS controller deleted, can the active sensors be wired directly to TC unit (both wires per sensor wired to TC unit)? Another question, TC unit is to be wired to same power and ground as the PCM. Based on an RSX engine harness, would that be IG1 on E9 f...
- Mon Nov 25, 2013 10:50 am
- Forum: Traction Control with KPro
- Topic: Speed sensor type issue
- Replies: 6
- Views: 16191
Re: Speed sensor type issue
Wire a 150 ohm resistor in EACH input or just the active inputs? Does the system utilize all 4 sensors?
- Sun Nov 24, 2013 10:30 pm
- Forum: Traction Control with KPro
- Topic: Speed sensor type issue
- Replies: 6
- Views: 16191
Speed sensor type issue
Having done some research on TCS, liking the reviews it is getting. My question is, since there is a switch to set it to active OR inductive type, and my vehicle has BOTH types (one type front, other type rear), what can I do to make this system work? The vehicle is a 2000 insight with k20z3, so it ...
- Wed Apr 07, 2010 2:44 pm
- Forum: S300 Calibrations
- Topic: looking for base map b18c boosted !!!
- Replies: 1
- Views: 2436
- Fri May 15, 2009 6:43 pm
- Forum: S300 Calibrations
- Topic: HELP!!!! Rellay need a p72 base map
- Replies: 1
- Views: 2262
- Thu Apr 30, 2009 10:31 am
- Forum: s300 / SManager
- Topic: Water/Meth Injection help.. *fixed* Diagram Made
- Replies: 9
- Views: 6331
- Tue Apr 28, 2009 5:55 pm
- Forum: s300 / SManager
- Topic: Water/Meth Injection help.. *fixed* Diagram Made
- Replies: 9
- Views: 6331
- Tue Apr 28, 2009 10:21 am
- Forum: s300 / SManager
- Topic: Smanager wish list
- Replies: 150
- Views: 185056
Personally I would like the option of PSI for a vacuum unit. Actually all of the pressure units should be available in the vacuum section for consistency. It is difficult to implement vacuum into a unit that is solely for pressure, which is opposite of vacuum. What would -10psi be equivalent to in ...
- Fri Apr 24, 2009 6:20 pm
- Forum: S300 Calibrations
- Topic: prelude base map calibration question
- Replies: 13
- Views: 9660
- Fri Apr 24, 2009 10:09 am
- Forum: S300 Calibrations
- Topic: prelude base map calibration question
- Replies: 13
- Views: 9660
- Tue Apr 21, 2009 6:56 pm
- Forum: S300 Calibrations
- Topic: Anyone have map for E85??
- Replies: 6
- Views: 6637