Search found 32 matches

by Anointeddc5
Thu Apr 21, 2011 9:15 am
Forum: K-Pro / KManager
Topic: k24A2 DC5 stalls when throttle is applied
Replies: 2
Views: 1333

Thanks Corey I will see if that works, I am currently getting an Etune through Jeff Evans since there are no local KPRO tuners I trust and he just sent me a new Cal with 40% more fuel so I hope it works. This is what's been keeping me off the road for a while now.
by Anointeddc5
Wed Apr 20, 2011 6:40 pm
Forum: K-Pro / KManager
Topic: k24A2 DC5 stalls when throttle is applied
Replies: 2
Views: 1333

k24A2 DC5 stalls when throttle is applied

KManager v1.4.1.0 2002 Acura RSX-S K24a2 Swap KPro E85 fuel Open header 09 TSX Pistons, Forged Rods, Z1 Intake Cam with 50 degree VTC Gear, Walbro 255lph Fuel pump, RC 750cc injectors, Type-S oil pump, Complete Type-S wire harness. Problem: -----------------------------------------------------------...
by Anointeddc5
Wed Apr 29, 2009 10:38 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Will do, once I get results I will update the thread with my findings. Thanks again.
by Anointeddc5
Tue Apr 28, 2009 9:39 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Thank you for all the help I will check that asap. So besides the temp thing would you say that the rest can be fixed with a new tune?
by Anointeddc5
Mon Apr 27, 2009 11:29 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

So what is the temperature it should be at? The reason I ask is b/c if it is too cold it still happens when I've been driving the car for a while.
by Anointeddc5
Wed Apr 22, 2009 7:59 pm
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

OK here is the correct map and a 3rd gear datalog to "redline" I am getting cut at 7500rpm for some reason.
by Anointeddc5
Wed Apr 22, 2009 1:53 pm
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Well I got the car back on after doing what you said, and ran a 3rd gear datalog with the right map this time (the one I posted earlier was an older one) and I will post them up tonight after work. Cranny with my foot to the floor the TPS read 98 so it is still a WOT run in case you are wondering, I...
by Anointeddc5
Wed Apr 22, 2009 10:06 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Thank you I will try that when I get home. :D
by Anointeddc5
Wed Apr 22, 2009 8:24 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Ok well that wasn't good, lol. I uploaded the new map and now the car won't start, I tried going back to the old map and other maps I've had but no luck. The car turns over but immediately shuts off :?: Any suggestions? Should I try clearing the security and what not?
by Anointeddc5
Wed Apr 22, 2009 6:45 am
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Thanks man I will do a 3rd gear run on my way to work with your new map and post the data log when I get home tonight. I really appreciate the help
by Anointeddc5
Tue Apr 21, 2009 6:15 pm
Forum: K-Pro / KManager
Topic: Sputter@5800rpm and wall at 7k rpm
Replies: 13
Views: 3780

Sputter@5800rpm and wall at 7k rpm

Here are a few datalogs I recorded showing the problem as well as a cruising datalog to show how rich it is running.

Currently running:
Stock K20a2
Greddy Turbo
750cc injectors
ips kt1 cams
walbro fuel pump
greddy evo tt
unforgettable test pipe
stock fuel system no return
ngk bk8reix plugs
by Anointeddc5
Thu Feb 21, 2008 1:11 pm
Forum: Hondata News
Topic: Hondata 4 Bar MAP sensor
Replies: 7
Views: 25372

What is the ETA on the K-Series version?
by Anointeddc5
Wed Nov 21, 2007 11:08 am
Forum: K-Pro / KManager
Topic: High RPM Sputter and Cutoff help
Replies: 3
Views: 2193

Ok so should I lower the short term fuel trim? This wasn't the first datalog run this was after doing at least 4 pulls does that make any difference in the starting water temp (is it higher than normal?) Also I run 10psi high boost it's just that I run about 7psi for daily driving thats why I have a...
by Anointeddc5
Tue Nov 20, 2007 6:28 pm
Forum: K-Pro / KManager
Topic: High RPM Sputter and Cutoff help
Replies: 3
Views: 2193

High RPM Sputter and Cutoff help

Ok guys I need your help once again. I had my shop replace the crank sensor and it seems to have helped the problem to a degree. Now I think that my tuning may be off so maybe you can let me know what you see. Attached is the calibration and the datalog for it. Let me know what you think. Setup: k20...
by Anointeddc5
Fri Sep 14, 2007 7:07 am
Forum: Non-Hondata
Topic: RSX Engine Harness removal/install
Replies: 0
Views: 2229

RSX Engine Harness removal/install

Does anyone have a writeup on how to remove and install a new engine harness into an RSX-S? Thanks!