Search found 7 matches
- Fri Jul 20, 2007 12:33 pm
- Forum: s300 / SManager
- Topic: Adjusting values after datalogging
- Replies: 2
- Views: 1721
- Thu Jul 19, 2007 9:14 pm
- Forum: s300 / SManager
- Topic: Adjusting values after datalogging
- Replies: 2
- Views: 1721
Adjusting values after datalogging
I am trying to figure out which cells to adjust after I datalog. For example, if I datalog a pass and review it afterwards, I see 4 cells highlighted at a time. Let's say 4 cells are highlighted and the display shows 12.7 a/f. If my aim is to bring this down to 11.5 a/f how do I know which cell I ad...
- Wed May 02, 2007 5:37 pm
- Forum: s300 / SManager
- Topic: S300 boost control w/ AEM Boost Solenoid
- Replies: 6
- Views: 4770
ok, i read it. i want to know what to set solenoid activation pressure to. i have a 14psi spring in the wg. also, are the values in the pressure vs duty cycle table arbitrary? i don't understand how it works. do i make a pass at the wastegate pressure first?? then another one with the duty cycle rai...
- Tue May 01, 2007 8:56 pm
- Forum: s300 / SManager
- Topic: S300 boost control w/ AEM Boost Solenoid
- Replies: 6
- Views: 4770
S300 boost control w/ AEM Boost Solenoid
i don't get the difference between fixed duty cycle and gear based duty cycle. i tried setting the duty cycle at random numbers ranging from 10 to 25 boost is not increasing past the normal 14 psi. i don't even know what numbers i am supposed to put in pressure vs. duty cycle. also, what effects doe...
- Tue Apr 10, 2007 3:54 pm
- Forum: s300 / SManager
- Topic: Apex boost solenoid in place of GM solenoid
- Replies: 4
- Views: 4128
- Sat Apr 07, 2007 7:28 pm
- Forum: S300 Calibrations
- Topic: Need Calibration for built N/A
- Replies: 0
- Views: 2326
Need Calibration for built N/A
Ported/polished GSR head
Skunk2 Pro Series 3 Cams
81.5mm 13:1 Compression Wiseco
LS/VTEC
AEBS Manifold
70mm TB
310cc Injectors
Anyone gotta good calibration for this? I just want to break it in with a good map.
Skunk2 Pro Series 3 Cams
81.5mm 13:1 Compression Wiseco
LS/VTEC
AEBS Manifold
70mm TB
310cc Injectors
Anyone gotta good calibration for this? I just want to break it in with a good map.
- Fri Mar 30, 2007 3:48 pm
- Forum: s300 / SManager
- Topic: How's this calibration?
- Replies: 0
- Views: 1410
How's this calibration?
What do you guys think of this calibration as a starting point? A friend sent it to me and I wanted to know how safe it is to drive around on to break in the motor. I don't know where he got the calibration from. Thanks My setup: 85mm LS Sleeved Block CP 9:1 Pistons Scat Rods LS Crank GSR Head/sprin...