Search found 20 matches

by impc
Sat Oct 15, 2011 11:31 am
Forum: K-Pro / KManager
Topic: Upload successful, but changes not stored to ECU
Replies: 5
Views: 1420

Re: Upload successful, but changes not stored to ECU

I managed to solve this problem.
Things to remember when using KPro:
1. Make sure that battery voltage after ignition is ON, is above 12V.
2. Do not run KManager without closing for long periods (months :) ), it can get confused with changes needed to upload.

Thanks, my problem was solved.
by impc
Tue Oct 11, 2011 12:02 am
Forum: K-Pro / KManager
Topic: Upload successful, but changes not stored to ECU
Replies: 5
Views: 1420

Re: Upload successful, but changes not stored to ECU

Spunkster wrote:You have not provided the calibration or datalogs showing the problem.
I'm not able to get any datalogs/calibration before at the end of the week :(

Anything, that i can try, next time (in addition to datalogs)?
by impc
Mon Oct 10, 2011 11:38 am
Forum: K-Pro / KManager
Topic: Upload successful, but changes not stored to ECU
Replies: 5
Views: 1420

Re: Upload successful, but changes not stored to ECU

K-Pro Serial: 5442 ECU: 37820-PRB-A08 KManager: 1.5.1 Vehicle: Euro Civic Type-R, using PRB ECU with wideband lambda, ECU pins modified as described in http://www.hondata.com/techk20-ctr-o2wiring.html Car has been previously tuned using KManager 1.3.9 and has been running without any issues. Three w...
by impc
Sun Oct 09, 2011 12:13 pm
Forum: K-Pro / KManager
Topic: Upload successful, but changes not stored to ECU
Replies: 5
Views: 1420

Upload successful, but changes not stored to ECU

ECU Serial: 5442 KManager 1.5.1 ---- I have been tuning with K-Pro over 4 years now, but this is something new for me. When tuning fixed cam angles, and uploaded fixed cam angle map to ECU (no errors, upload was successful). 1. Started engine and when throttle was used cam did not remain in fixed po...
by impc
Wed Oct 05, 2011 5:30 am
Forum: K-Pro / KManager
Topic: tps reading -1%
Replies: 16
Views: 4817

Re: tps reading -1%

Also upgraded kal to another KPro ECU with 1.5.1 last weekend, and again TPS -1 !!! (previously this ECU used 1.3.9 version and TPS was perfect)
by impc
Sun Sep 18, 2011 11:35 am
Forum: K-Pro / KManager
Topic: tps reading -1%
Replies: 16
Views: 4817

Re: tps reading -1%

if i enter values manually (minimum reading), i can get values to display 0, but engine in some situations does not "understand", that i'm off throttle (probably reading wrong TPS value),
and idle is acting strange (rpm ~1200 and cam. angle surges from 0 to 20)
by impc
Sat Sep 17, 2011 2:52 pm
Forum: K-Pro / KManager
Topic: tps reading -1%
Replies: 16
Views: 4817

Re: tps reading -1%

my TPS started reading -1% when upgraded to 1.5.1 (stock TPS sensor), recalibration does not work.
by impc
Wed Aug 31, 2011 10:12 am
Forum: K-Pro / KManager
Topic: New knock control tables
Replies: 6
Views: 2249

Re: New knock control tables

Thanks, thats very useful info. It clearly works, just maybe not exactly as we would expect. I saw your earlier post, and noticed your datalog was at a cam angle of 24*. It may be that the difference is due to interpolation between the 20* and 30* cam tables. unfortunately this is not a case. In 30...
by impc
Wed Aug 31, 2011 3:24 am
Forum: K-Pro / KManager
Topic: WOT compensation tables and knock control related tables
Replies: 1
Views: 1143

Re: WOT compensation tables and knock control related tables

ok, noone knows :(
But can someone give a hint what values should i run in "WOT cat protection tables" when i'm not using cat and need ecu to run as close as possible to values defined in fuel tables (all values 12.5)?
by impc
Wed Aug 31, 2011 3:12 am
Forum: K-Pro / KManager
Topic: Force radiator fan on parameter not working?
Replies: 2
Views: 1220

Re: Force radiator fan on parameter not working?

also force radiator fan did not work on Euro Civic Type-R (EP3) using PRB KPro ECU
by impc
Wed Aug 31, 2011 3:08 am
Forum: K-Pro / KManager
Topic: New knock control tables
Replies: 6
Views: 2249

Re: New knock control tables

In theory this should work as you described, but in reality the results are little different: 1. Main ignition 43 deg, Ignition limit 8 deg, ignition retard 12 deg, knock control 79%, from formula this is: 8 - (0.79 * 12) = -1.5 deg Actual results (from datalog): Knock retard: 0 deg. Knock ignition ...
by impc
Sat Aug 20, 2011 12:41 pm
Forum: K-Pro / KManager
Topic: WOT compensation tables and knock control related tables
Replies: 1
Views: 1143

WOT compensation tables and knock control related tables

Hi, 1. It's nice to have option to change WOT compensation tables, but can someone explain in more details how it's working? For ex. how is value defined in table used for final fuel amount computation? simple formula would be great! 2. Knock control related tables use 10 columns, for ex. if i'm usi...
by impc
Tue Jun 01, 2010 11:19 am
Forum: K-Pro / KManager
Topic: CAT over temp bug
Replies: 15
Views: 4494

waiting also this feature ;)!
by impc
Thu Sep 25, 2008 12:38 am
Forum: K-Pro Calibrations
Topic: I need a program for this K20A2 engine!
Replies: 6
Views: 3595

hola amigo :wink: Yo tengo algo parecido, te lo marco en negrilla -K-Pro ECU PRB -injen cai -rbc inlet manifold -TODA exhaust manifold + direct inox b-pipe + super sprint oval muffler -Schrick cams, similar to TODA A3 with 13mm open valve -TODA valve springs Zspeed valve springs -TODA Metal Head Ga...
by impc
Wed Jul 30, 2008 2:16 pm
Forum: K-Pro Calibrations
Topic: toda calib.
Replies: 13
Views: 7878

hi, if someone have map for A3 please post it here, more than one person is interested :)