Search found 31 matches

by inteGReddy
Tue Aug 11, 2009 7:39 am
Forum: s300 / SManager
Topic: car randomly begins running rich
Replies: 1
Views: 1597

car randomly begins running rich

i have the plx wideband installed (wired into the eld wire) and i have noticed my car doing funny stuff as of late. yesterday i was driving and noticed my car doing weird things when i let off of the gas. it would sound like it was revving down and then hiccup around 2000k rpm (it would like stop th...
by inteGReddy
Tue Mar 31, 2009 9:21 am
Forum: s300 / SManager
Topic: dataloging AF cuts out at high rpm
Replies: 4
Views: 2966

Re: dataloging AF cuts out at high rpm

After about 6000RPM datalogging of AF cuts out. Hondata continues to datalog everything else except AF. I've got an Innovate LC1 connected to D10 ELD. have you verified that it is correcting datalogging before 6000rpm? im stumped on this one so far and have to think its either a wiring or parameter...
by inteGReddy
Tue Mar 31, 2009 9:18 am
Forum: s300 / SManager
Topic: Car is knocking badddd!
Replies: 9
Views: 4054

Re: Car is knocking badddd!

with a setup like that id be towing it to a tuner... the price you'd pay to ensure the longevity of your motor is insignificant in comparison to the price you paid for the parts.
by inteGReddy
Thu Mar 19, 2009 11:04 am
Forum: s300 / SManager
Topic: S300 & HFS-5 Aquamist - Naturally Aspirated High Compres
Replies: 1
Views: 2223

i always joke about how my integra sounds like a p52 mustang... i really would feel like an old fighter plane with some methanol rofl.
by inteGReddy
Thu Jan 15, 2009 11:40 am
Forum: s300 / SManager
Topic: cold start idle
Replies: 20
Views: 14204

Check these links out... doing these two things greatly improved my idling.

How to Clean your FITV

How to Clean your IACV
by inteGReddy
Thu Jan 08, 2009 10:32 am
Forum: s300 / SManager
Topic: Need some serious Help, please!!
Replies: 58
Views: 20159

Can someone please tell me when setting it the way the service manual tells you to is wrong, i mean i had it at 0.48 at idle and 6.8 at wot adjusted all the way to one side as per the multimeter........ when i moved it to the middle and hondata reading 5 volts at idle the car fixed itself. I don't ...
by inteGReddy
Thu Jan 08, 2009 9:53 am
Forum: s300 / SManager
Topic: s300 problems
Replies: 14
Views: 5827

when the computer is turned on...the light should be green where the data cable connects to the ecu correct? because there is a red light and a green light..i only remember seeing green before not the red? am i correct or incorrect on this? I believe the red blinking light is normal function when y...
by inteGReddy
Thu Jan 08, 2009 9:39 am
Forum: s300 / SManager
Topic: S300 and MSD ignition
Replies: 6
Views: 5162

No, you should not have to retune, but the aftermarket ignition systems often cause interference with datalogging. I have used a MSD Distributor with my s300 unit and intereference can be an issue. Dont forget that Honda ignitions are sufficient for upwards of 400 hp! Hondata alone should be suffic...
by inteGReddy
Thu Jan 08, 2009 9:29 am
Forum: S300 Calibrations
Topic: H23VTEC turbo basemap
Replies: 3
Views: 2739

wrong forum, check out s300 calibrations
by inteGReddy
Thu Jan 08, 2009 9:26 am
Forum: s300 / SManager
Topic: VTEC troubleshooting through ECU?
Replies: 3
Views: 2297

GI8U2racing wrote:The tak is back! The guide I was following on H-T for the gauge cluster swap has the VSS output wrong, so the ECU wasn't getting the right signal. I just traced it on the back of the cluster and figured it out.
whew, glad you narrowed it down.
by inteGReddy
Wed Sep 10, 2008 6:17 pm
Forum: S300 Calibrations
Topic: ls basemap
Replies: 1
Views: 2477

Re: ls basemap

ls basemap with 2.5" catback and intake 7lb flywheel stg2 clutch i guess like a "tune" for that kind of stuff. never did tuning before so idont know whats possible kindve late to be responding but you should be fine using the stock b18b1 basemap which is included with smanager. i dou...
by inteGReddy
Wed Sep 10, 2008 4:04 pm
Forum: s300 / SManager
Topic: Need to drive car to dyno.
Replies: 4
Views: 2381

start with a stock timing map, retard 1 degree per psi in boost and tune your fuel maps accordingly. start with values you know are going to be rich at your lowest boost setting and then lean it out as needed. its really pretty easy to get a decent street tune before driving to the dyno. yeah, the ...
by inteGReddy
Wed Sep 03, 2008 5:24 pm
Forum: Non-Hondata
Topic: need some help
Replies: 3
Views: 3716

Re: need some help

albastiki wrote:Hi everybody. I want same help please. Can I use any EGT sensors with greddy EGT electronic gauge?? And Thanks
wow, doubt too many people know much about greddy products here.
by inteGReddy
Wed Sep 03, 2008 5:23 pm
Forum: Non-Hondata
Topic: speedometer going crazy
Replies: 3
Views: 3556

ok. i have now bougth a plx wideband, and installed it, but the speedometer is still not working as it should. when i cutted the original o2 lambda, it was a spark from it. is a spark enough to kill the speed sensor? please answer me if anyone knows. yes a spark is enough to seriously damage or des...
by inteGReddy
Wed Sep 03, 2008 5:02 pm
Forum: Non-Hondata
Topic: surging, underpowered acceleration problem
Replies: 1
Views: 3047

wow. wouldnt expect problems out've an '08 honda. i wouldnt expect it to shift as good as an itr tranny at any rate. have you modified the car in any way? it shouldnt be backfiring... ive had my integra for 10 years and have toyed with all kinds of timing curves and have yet to make it backfire. im ...