Search found 65 matches

by D-Rob
Tue Mar 24, 2020 5:35 pm
Forum: Civic Type R 2015+
Topic: Throttle closure during WOT
Replies: 7
Views: 669

Re: Throttle closure during WOT

No DTC's related to boost control are disabled unless Richard has done so himself.
by D-Rob
Mon Feb 10, 2020 3:21 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?
Replies: 9
Views: 1841

Re: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?

Arnaldo, Please send me an email, and I'm happy to address whatever concerns you have. The MAF scaling is 100% the same as what's included in Hondata's basemaps, which appears to be a little richer than target. I have a MAF scale that should be closer to your needs if you'd like it applied. I'd like...
by D-Rob
Tue Dec 24, 2019 1:50 pm
Forum: Civic Type R 2015+
Topic: killing stock spark plugs
Replies: 2
Views: 450

Re: killing stock spark plugs

Those plugs are fouled; likely from the additive you're using.
by D-Rob
Wed Dec 04, 2019 8:57 am
Forum: RDX 2007-2012
Topic: Boost pressure issue/ Flashpro
Replies: 6
Views: 1812

Re: Boost pressure issue/ Flashpro

One thing to note, there is some kind of limitation in the AFM setting. It will not let me enter a higher G/S value than 327. This correlates to 4.16 volts, so all the values above 4.16 volts are the same 325 g/s. Shouldn't be an issue as I'm only reading 220 g/s max now at about 15 psi. I don't pl...
by D-Rob
Wed Nov 28, 2018 3:43 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled
Replies: 23
Views: 7390

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

An email was sent to support@hondata.com on Friday, October 26th that contained four calibrations.

It has been resent just now.
by D-Rob
Fri Nov 23, 2018 2:11 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled
Replies: 23
Views: 7390

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

I'd like to add that 2007 RDX also tosses P0128 when the second ECT sensor is disabled.
by D-Rob
Tue Nov 20, 2018 9:20 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled
Replies: 23
Views: 7390

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

I see no mention of a fix in 3.1.8.

Should I tell the clients the error is still not addressed?
by D-Rob
Mon Oct 29, 2018 12:42 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled
Replies: 23
Views: 7390

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Calibrations were sent a few days ago, by the way.

Thank you.
by D-Rob
Wed Oct 24, 2018 7:49 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled
Replies: 23
Views: 7390

FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Hello, I have several clients that have updated calibrations using the 3.1.6.0 software and are receiving the P0128 (Coolant thermostat temperature check) DTC code despite it being disabled in the calibration for many months. I've been explaining to said clients that they do not have a failing therm...
by D-Rob
Mon Sep 24, 2018 5:41 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: AFR issues
Replies: 8
Views: 1451

Re: AFR issues

It's likely a misfire related to trying to hang the injector open too long.

The fuel system is too small for a significant amount of ethanol without targeting a leaner mixture.
by D-Rob
Mon Sep 10, 2018 12:06 pm
Forum: RDX 2007-2012
Topic: Speed density fueling
Replies: 33
Views: 10634

Re: Speed density fueling

Speed density fueling, stock-sized MAF housings, and the MAP-based WOT determination features are working flawlessly now on a handful of my clients' cars; the transmission's shift characteristics have greatly improved, but as others have mentioned, we are limited by the MAF's P0103 code. It is indee...
by D-Rob
Wed Jun 13, 2018 2:17 pm
Forum: RDX 2007-2012
Topic: Speed density fueling
Replies: 33
Views: 10634

Re: Speed density fueling

Speed density fueling works, but I have some notes regarding it.

What email should I send them to?

Thanks!
by D-Rob
Wed Jun 13, 2018 10:07 am
Forum: RDX 2007-2012
Topic: Speed density fueling
Replies: 33
Views: 10634

Re: Speed density fueling

I've got an RDX on the dyno right now that I'm hoping to build a speed density file for.

We're going to see how nice it plays.