Search found 14 matches

by tsrperformance
Fri Oct 03, 2008 9:45 am
Forum: Romeditor 4 Software
Topic: Check this out
Replies: 3
Views: 8047

fixed. it was a faulty romulator
by tsrperformance
Wed Oct 01, 2008 12:19 pm
Forum: Romeditor 4 Software
Topic: Check this out
Replies: 3
Views: 8047

as soon as i put it into 3rd gear to calibrate the dyno, the rpm, map, duty, iat, ect, etc. goes irratic and the car tries to jump off of the dyno.

Its hard to explain but in the log it shows what im trying to explain. thanks
by tsrperformance
Wed Oct 01, 2008 10:02 am
Forum: K-Pro / KManager
Topic: erratic speed sensor
Replies: 3
Views: 1527

it was the resistor type spark plugs causing the problem lol :oops:
by tsrperformance
Wed Oct 01, 2008 10:00 am
Forum: Romeditor 4 Software
Topic: Check this out
Replies: 3
Views: 8047

Check this out

Ok, so I tuned this car last week on a small turbo. Customer changed the turbo and came back for a retune. He changed the turbo and the map sensor. Put it on the dyno, get it rolling to calibrate the dyno and this happens. It only happens going into 3rd gear. Changed ECUs, changed blue boxes, change...
by tsrperformance
Wed Sep 24, 2008 10:42 pm
Forum: K-Pro / KManager
Topic: erratic speed sensor
Replies: 3
Views: 1527

also disconnected the speed sensor and did a datalog .
the same thing happened. read 9mph
by tsrperformance
Wed Sep 24, 2008 9:43 pm
Forum: K-Pro / KManager
Topic: erratic speed sensor
Replies: 3
Views: 1527

erratic speed sensor

check out this log With 2 step activated, the speed sensor reads 19mph When it shows 19 mph, of course 2 step is deactivated and full-throttle shift activates. It sometimes goes up to the 60 mph range. With the 2-step set to something low, say 4000 rpm, this will not happen. speed stays at 0mph like...
by tsrperformance
Fri Sep 19, 2008 1:49 pm
Forum: Romeditor 4 Software
Topic: Component Q31
Replies: 1
Views: 6953

Component Q31

On Nitrous/Aux 2, to use A20 (PCS) output to activate a nitrous relay, what needs to be done to Q31? It is a US P75 ECU. Tried it without changing anything on the board but it will not activate the relay.
Thanks in advance
by tsrperformance
Wed Jul 30, 2008 1:53 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

and when it does that, the check engine light blinks once
by tsrperformance
Wed Jul 30, 2008 1:52 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

it doesnt feel like a rev limit. more like a boost cut. I can get a speed sensor signal, i just have to plug it in. Wouldnt a rev limit kind of skip around at that rpm range? not just drop off like a boost cut?
by tsrperformance
Wed Jul 30, 2008 1:35 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

recalibrated tps. heres the log and kal
by tsrperformance
Wed Jul 30, 2008 1:22 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

wow. wierd. ill recalibrate it and report back. thanks
by tsrperformance
Wed Jul 30, 2008 12:28 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

thanks
by tsrperformance
Wed Jul 30, 2008 9:25 am
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

it is a 2006 type s. full-race turbo kit. pl4-rc1000s. I was disabling sensors to try to narrow down the problem. for this particular log, they just werent enabled. on previous logs, no knock was detected and the speed sensor was working properly until this glitch or whatever it may be happened. Als...
by tsrperformance
Tue Jul 29, 2008 5:37 pm
Forum: K-Pro / KManager
Topic: ECU shutting down?
Replies: 11
Views: 2741

ECU shutting down?

Check out this log. At the upper rpm range, everything pretty much goes default. All grounds are good, using resistor type plugs. I know its running rich. Any ideas? thanks in advance