Search found 17 matches

by killer2239
Thu Oct 04, 2012 6:12 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Stock/Modified Calibrations
Replies: 1
Views: 4173

Stock/Modified Calibrations

Is the "stock calibration" that is included the actual factory honda map/settings, or a stock map configured/tuned by you guys? I know the modified calibrations are tuned/modified "stock" maps. If you remove flashpro from the car, like were to revert back to full stock, does that load and put the ec...
by killer2239
Sun Apr 04, 2010 7:06 pm
Forum: s300 / SManager
Topic: Idle surf after injector change
Replies: 0
Views: 1136

Idle surf after injector change

Ok, so let me give a brief run down. Had the car running great for cruising, idle, and WOT. Was previously running 440cc RC injectors. Changed to 900cc injectors from injector clinic, and ever since the idle surfs. I changed the voltage settings that they provided, and the current size to 900. Wheth...
by killer2239
Mon Apr 20, 2009 12:19 pm
Forum: K-Pro / KManager
Topic: Trouble driving while motor is cold
Replies: 4
Views: 2138

Has the car been tuned on the dyno yet? I tuned the car on the dyno, runs like a champ. Used the cold air map as a start when we did the tuning. As far as driving around i left the map alone for cruising, except made adjustments to AF to make it closer to 14.7 for cruising, then closed loop to do t...
by killer2239
Wed Dec 17, 2008 10:23 am
Forum: Applications
Topic: S2000 General Question
Replies: 2
Views: 2315

Spunkster wrote:Because it is not possible. The ecu is just like OBD2 ECu's from 96-2001.
Ah. Makes sense. Thanks for the answer, like i said i just was curious.
by killer2239
Wed Dec 17, 2008 9:38 am
Forum: Applications
Topic: S2000 General Question
Replies: 2
Views: 2315

S2000 General Question

Just had a general question about hondata for the s2000. Yes im well aware of the kpro version and conversion to make this work. Just had a question. Was there any reason why the s2000 ecu was never chipped to just use stock ecu instead of going through all the conversion? I think its safe to say at...
by killer2239
Fri Oct 10, 2008 9:10 am
Forum: Applications
Topic: Hondata ECU for 00-05 S2000
Replies: 66
Views: 90669

You really need to tune this on the dyno. Just uploading a base calibration and expecting everything to wrok perfectly may damage your engine. There are no immediate plans to provide an AP2 stock calibration as the AP1 can be used fro both to start and begine tuning from. Yes i understand having it...
by killer2239
Wed Oct 08, 2008 12:02 pm
Forum: Applications
Topic: Hondata ECU for 00-05 S2000
Replies: 66
Views: 90669

Will there be an AP2 stock map provided anytime soon? Or even the AP2 map used in the 2 reflashes you have for 06+?? I know the ap1 map will run just fine, as iv used ap1 ecu in my car for a few months. But i feel for daily driving the ap2 ecu has a much better feel than the ap1 ecu. Since i have ap...
by killer2239
Mon Sep 29, 2008 3:58 pm
Forum: K-Pro / KManager
Topic: Software not opening after install?
Replies: 11
Views: 4056

Your ISP might be caching the DNS entry for hondata.net. To check, open a command prompt window (Start menu, run, enter 'cmd'). type 'ping hondata.net' The IP address should be 74.220.215.52 If not, your ISP is caching the DNS entry for hondata.net when they should not be. Yeah it pings that IP add...
by killer2239
Mon Sep 29, 2008 3:17 pm
Forum: K-Pro / KManager
Topic: Software not opening after install?
Replies: 11
Views: 4056

Try launching the software with the network cable disconnected. I disabled my network card instead of unplugged (pain in ass with my docking station setup) and i was able to open it just fine. Any ideas as to why it crashes when connected to the network? Like i said S300 works just fine when on my ...
by killer2239
Mon Sep 29, 2008 2:46 pm
Forum: K-Pro / KManager
Topic: Software not opening after install?
Replies: 11
Views: 4056

Last one i have is 1.2.8. However when i click download link for software on kpro area i get an error of like 600 plus lines of just weird text. I think its ascii or something. http://hondata.com/updates/?app=KManager&action=download is the link. EDIT: Ok so i found 1.3.0 on the site here. Uninstall...
by killer2239
Mon Sep 29, 2008 11:52 am
Forum: K-Pro / KManager
Topic: Software not opening after install?
Replies: 11
Views: 4056

I disabled the virus scan on my machine after reading that article. Reinstalled it and still unable to run. Any other ideas?
by killer2239
Mon Sep 29, 2008 10:06 am
Forum: K-Pro / KManager
Topic: Software not opening after install?
Replies: 11
Views: 4056

Software not opening after install?

I have S300 and KPro installed on my machine. I have the latest 1.2.8 version installed. S300 opens perfectly. When i install kpro, then go to open it nothing happens. I uninstalled and reinstalled but does the same thing. I have Windows XP Pro installed with SP3. I am a computer tech so i have trie...
by killer2239
Thu Sep 25, 2008 1:18 pm
Forum: Applications
Topic: Hondata ECU for 00-05 S2000
Replies: 66
Views: 90669

Thanks for the info!
by killer2239
Thu Sep 25, 2008 12:19 pm
Forum: Applications
Topic: Hondata ECU for 00-05 S2000
Replies: 66
Views: 90669

Get a PLX. Wire the PLX narrow band output into the primary o2 sensor, or leave in the stock o2 sensor. Wide the PLX wideband output into the ELD input. You can then datalog & graph the air/fuel. If i want to go the route of using the tune features of the wideband for closed loop and to get rid of ...
by killer2239
Wed Sep 24, 2008 12:32 pm
Forum: s300 / SManager
Topic: Closed loop and wideband.
Replies: 7
Views: 3711

Spunkster wrote:No. This is why we only recommend the PLX widebands as they have a wideband and narrowband output at the same time.
Thanks for the info Spunkster. Luckily my other friend will be going the plx route after learning this.