Hondata

I have recommended.

What do you mean by how much do I "eat"?

Sorry. I made a mistake.
driving distance in time.

How much do you eat 100-200 km?
Logs good !!!!
Ignition WOT angle 6 degrees.
Catalyst temperature 700 C.
It would be safer if you lower the pressure and increase the ignition angle above 12 degrees.

OK.
Last question.
Why the ignition angles in the tables do not correspond to the graphs of the datalog in the mode WOT?
I'm watching a "datalog0001.fpdl"
The picture above is a blue and red circle.

Ок.
Question.
Ignition (In Cam +) = Ignition advanced?
Ignition (In Cam - ) = Ignition retarded?
How does the table work Ignition (In Cam - & Ex Cam + ) ?
Thanks

Hondata wrote: ↑

Mon Apr 01, 2019 4:54 pm

The Bosch ECU does not have very good knock control and you have to do it all yourself in the tables.

Hello.
I have not find on the forum explanation of how the ignition cards in FK8 now work.
Will there be a full explanation in the help and how to control the ignition?

Thank you for the answers.

OK.
last question.
What the MAF sensor you use?



This is the Honda MAF sensor in the 3.5 inches tube?

Good. I understand. The first according to plan hondata fk8. One more question. Can I install the ECU FK8 in a Honda Civic FK2? My plan is to install a full-race turbo-kits in Civic FK2. https://www.full-race.com/store/borg-warner-efr/efr-turbo-kits/honda-fk8-ctr-vband-electronic-wastegate-turbo-kit...

Hello Hondata.
Can I remove all errors in the Civic FK2 when removing the catalyst?
In FK8 FlashPro there is such an option.
Thank.

i have a turbo crv 02-04 , you can use a pra ecu if you already have a kpro in it , you just cant control the intake flaps in the plastic manifold with the pra in the k20a3 (i think) 150ps engine , internally the oem ecu is same layout/chipset as a pra , so you can also install k100 kpro etc You're...

https://www.hondata.com/news/blogart69
Hondata. Many thanks for the work done.

For the european market was not produced CR-V with the engine 2.4
only 2 liters from ECU 37820-PNL-G01-02 M/T

+1
I have the same problems