Search found 13 matches

by 2rotormotor
Thu Oct 29, 2009 8:53 pm
Forum: Civic Si 2006-2011 Americas
Topic: Cam angle tabs
Replies: 6
Views: 3336

1. Ask Honda. 2. Possibly, but if you changed the cam angle index then you'd need to re-tune the ignition, fuel, knock, vtc & wot compensation tables. right but my car likes lower angles and up top is where I would use 10-20-30 instead of just 15. I feel that i can get a more precise tune and still...
by 2rotormotor
Thu Oct 29, 2009 8:47 pm
Forum: Civic Si 2006-2011 Americas
Topic: Fuel compensation by gear
Replies: 3
Views: 2646

Yes, it is possible. As a side note, I recall in out testing that changing the dyno ramp rate from very slow to very fast did not change the AF. Well I havent dynoed my car yet, but I did fully street tune it 3rd gear. However 1st gear is lean, 2nd still leaner than third but richer than 2nd, 3rd p...
by 2rotormotor
Tue Oct 27, 2009 2:10 pm
Forum: Civic Si 2006-2011 Americas
Topic: knock retard
Replies: 0
Views: 1668

knock retard

Anyway to remove knock retard? My knock sensor is faulty and I get a circuit malfunction. Its almost impossible to tune with the knock retard changing constantl depending on gear and rpm
by 2rotormotor
Mon Oct 26, 2009 11:01 pm
Forum: Civic Si 2006-2011 Americas
Topic: Cam angle tabs
Replies: 6
Views: 3336

Cam angle tabs

why is it that on kpro you have the vtc tabs every 10 cam angle and ours goes from 15 to 30 instead of having 10 and 20? Is there anyway you guys can change the tabs ?
by 2rotormotor
Mon Oct 26, 2009 10:56 pm
Forum: Civic Si 2006-2011 Americas
Topic: lambda overlay
Replies: 2
Views: 2104

awesome thank you
by 2rotormotor
Sun Oct 25, 2009 11:24 am
Forum: FlashPro Manager
Topic: Idle target AFR adjustment and fuel compensation by gear?
Replies: 10
Views: 5142

Fuel compesation by gear would be great. I just did a full tune yesterday and as I went through the gears it got richer and richer.
by 2rotormotor
Sat Oct 24, 2009 8:29 pm
Forum: Civic Si 2006-2011 Americas
Topic: IAT compensation
Replies: 1
Views: 1630

all you have to do is click on the temp that you wanna change and type in the value you want
by 2rotormotor
Sat Oct 24, 2009 8:25 pm
Forum: Civic Si 2006-2011 Americas
Topic: lambda overlay
Replies: 2
Views: 2104

lambda overlay

can you make it so that the suggested fuel change be used from the wideband input? I dont have a primary sensor anymore.
thank you.
by 2rotormotor
Sun Oct 11, 2009 12:16 pm
Forum: Civic Si 2006-2011 Americas
Topic: Feature request
Replies: 7
Views: 3373

what if we wire the analog output to the primary sensor?
by 2rotormotor
Sun Oct 04, 2009 4:11 pm
Forum: FlashPro Manager
Topic: FlashPro Manager V1.1.0.9 beta
Replies: 31
Views: 12719

Pir8pete wrote:a possable bug?

No icon showing!

Image



If theres a bug I will find it
you gotta right click on it and associate it with fpmanager. Just rt clik go to open with and click associate this filetype with this program.
by 2rotormotor
Sat Oct 03, 2009 11:00 am
Forum: Hondata News
Topic: Low temperature thermostats
Replies: 2
Views: 15377

the 160 opens up sooner and closes later. There is a difference. thats why they have different temperature ratings. If not they would all be the same.
by 2rotormotor
Mon Sep 28, 2009 9:28 pm
Forum: Civic Si 2006-2011 Americas
Topic: Using sec o2 wideband input
Replies: 14
Views: 5196

Using sec o2 wideband input

I have a question, I have the stock sensor disconected but the wideband voltage says 5v on flashpro. I even disconnected the white plug where you say to tap into and it still says 5v. Isnt the voltage supposed to be at 0 with no sensors connected? I am trying to install an aem eugo but when I tap it...
by 2rotormotor
Fri Nov 14, 2008 1:56 am
Forum: K-Pro / KManager
Topic: erratic behavior
Replies: 1
Views: 1165

erratic behavior

I have an 06 rsx with a custom kal. I have been running this kal for a few months now. All of a sudden my car bogs during idle randomly. Today I was able to hook up the laptop but wasnt able to save the datalog that showed the problem. But I was able to review it for a while before my laptop died. W...