Search found 14 matches

by Andros
Thu Apr 10, 2014 11:50 am
Forum: Applications
Topic: D16a9 obd1
Replies: 2
Views: 2438

Re: D16a9 obd1

Yes, you can install the S300 module on a P29 ECU (we've done it). The ECU itself is similar to the P06 ECU but it doesn't have the baro sensor.
by Andros
Tue Aug 24, 2010 7:07 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Boost control
Replies: 7
Views: 4977

Boost control

Are there any plans on adding the boost control output for us flashpro users?
or is the hardware not compatible?
by Andros
Mon May 17, 2010 2:32 pm
Forum: Civic Si 2006-2011 Americas
Topic: Differences on South American Calibrations
Replies: 3
Views: 2131

But the central american files are different from the south-american ones, right? because at least 3 customers have told me that they "feel" the difference between south american and central american tuned files.
by Andros
Fri May 14, 2010 10:12 am
Forum: Civic Si 2006-2011 Americas
Topic: Differences on South American Calibrations
Replies: 3
Views: 2131

Differences on South American Calibrations

There are 3 options on the southamerican calibration vehicle types (M, P1, P2). I was wondering if the base and tuned maps on all of those is the same or are there differences between them?
And the same question applies to the central america and mexico vs. south american files.

Thanks!
by Andros
Mon Aug 24, 2009 11:49 am
Forum: Applications
Topic: US ECU on NON US model
Replies: 1
Views: 2551

US ECU on NON US model

A friend of mine has a 2009 civic SI with ecu # 37820-RRB-K02. Since that ECU is not supported by hondata, I was wondering if we could purchase a RRB-AXX ECU, install it on the car, get it coded by the dealer and then buy the flashro to tune it. Is this possible? If not, which other options do we ha...
by Andros
Thu Aug 06, 2009 10:09 am
Forum: s300 / SManager
Topic: Injector DC drops to 0 randomly
Replies: 1
Views: 1219

Injector DC drops to 0 randomly

The problem we are experiencing is that out of no where the car started to stall at certain rpms, but not always. Fuel pressure is ok (changed the fuel pump just to be sure) and spark time is ok also. As I said the car ran fine for a couple of months. I plugged in my PC and found out that when the c...
by Andros
Wed Apr 22, 2009 10:19 am
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 4596

Please guys, this is the only matter that's holding me back to start the turbo process.

FWIW, it'a a DOHC ZC d16 car.
by Andros
Tue Apr 21, 2009 1:32 pm
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 4596

Ok, got it. Would this distributor work? http://www.torontojdm.com/lite/cart.php?target=product&product_id=3253&category_id=92 And I'm guessing that the extra wires that the obd0 to obd1 harness has need to be routed to the new dizzy (thru the firewall)? Is there a wire diagram for that harness so t...
by Andros
Tue Apr 21, 2009 12:47 pm
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 4596

But, if I don't change the dizzy, I wouldn't be able to alter the timing, and that would be it, am I wrong?
by Andros
Thu Apr 16, 2009 8:56 am
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 4596

D16A9 OBD0

I'm about to turbo an old 90 civic and saw that I need the OBD0 to OBD1 connector and use an OBD1 ECU. I also saw that I need a new dizzy and 02 sensor, and I was wondering why do I need these parts? I mean, on another d16a9 engine (on a later model) which had an obd1 ecu as stock, had no o2 sensor ...
by Andros
Thu Apr 16, 2009 8:48 am
Forum: Applications
Topic: Would these ECUs work?
Replies: 7
Views: 3651

Thanks guys!
by Andros
Wed Apr 15, 2009 8:53 pm
Forum: Applications
Topic: Would these ECUs work?
Replies: 7
Views: 3651

But it'll work on a MT car, right?
by Andros
Tue Apr 14, 2009 8:21 pm
Forum: Applications
Topic: Would these ECUs work?
Replies: 7
Views: 3651

Cool, but is the P08 already socketed or is it stock?
by Andros
Mon Feb 09, 2009 1:30 pm
Forum: Applications
Topic: Would these ECUs work?
Replies: 7
Views: 3651

Would these ECUs work?

Hey guys, I just got this 2 ECUs from a friend which he got collecting dust. He said that both were "tuned" but I opened them and didn't see any type of chip soldered on them so I'm guessing they are stock. Would any of these work with an s300? P2P-A31 http://img.photobucket.com/albums/v114/NoFriegu...