Search found 18 matches

by Andros
Sun Sep 20, 2020 7:37 am
Forum: K-Pro / KManager
Topic: Baro sensor
Replies: 8
Views: 6194

Re: Baro sensor

The Baro sensor is mounted to the circuit board inside the ECU. That's why you can't find any throubleshooting other than "replace ECU". Why it works on one car and not another is a mystery. Are you using the same tune file for both cars? If not, it's possible that one tune file uses the ...
by Andros
Fri Sep 11, 2020 11:47 am
Forum: K-Pro / KManager
Topic: Baro sensor
Replies: 8
Views: 6194

Re: Baro sensor

The manual says to replace the ecu. But I know the ecu is ok...
by Andros
Fri Sep 11, 2020 10:47 am
Forum: K-Pro / KManager
Topic: Baro sensor
Replies: 8
Views: 6194

Re: Baro sensor

Ok, then which other sensor could be associated to the baro sensor? Or which other route to fix that code would you suggest?

Maybe a kmanager option to disable that code like on the smanager.
by Andros
Fri Sep 11, 2020 9:49 am
Forum: K-Pro / KManager
Topic: Baro sensor
Replies: 8
Views: 6194

Baro sensor

Hello, I'm almost done on a 2005 Fit k20 swap. After rewiring everything from the oem engine harness everything is working ok expect for this DTC that I'm getting: P1107 Barometric Pressure Sensor Low Voltage. I did test the ECU on another kswaped EG and the same file I used on the fit works perfect...
by Andros
Thu Apr 10, 2014 11:50 am
Forum: Applications
Topic: D16a9 obd1
Replies: 2
Views: 3143

Re: D16a9 obd1

Yes, you can install the S300 module on a P29 ECU (we've done it). The ECU itself is similar to the P06 ECU but it doesn't have the baro sensor.
by Andros
Tue Aug 24, 2010 7:07 am
Forum: S2000 2006-2009 Americas/Europe/Asia
Topic: Boost control
Replies: 7
Views: 6663

Boost control

Are there any plans on adding the boost control output for us flashpro users?
or is the hardware not compatible?
by Andros
Mon May 17, 2010 2:32 pm
Forum: Civic Si 2006-2011 Americas
Topic: Differences on South American Calibrations
Replies: 3
Views: 2634

But the central american files are different from the south-american ones, right? because at least 3 customers have told me that they "feel" the difference between south american and central american tuned files.
by Andros
Fri May 14, 2010 10:12 am
Forum: Civic Si 2006-2011 Americas
Topic: Differences on South American Calibrations
Replies: 3
Views: 2634

Differences on South American Calibrations

There are 3 options on the southamerican calibration vehicle types (M, P1, P2). I was wondering if the base and tuned maps on all of those is the same or are there differences between them?
And the same question applies to the central america and mexico vs. south american files.

Thanks!
by Andros
Mon Aug 24, 2009 11:49 am
Forum: Applications
Topic: US ECU on NON US model
Replies: 1
Views: 2879

US ECU on NON US model

A friend of mine has a 2009 civic SI with ecu # 37820-RRB-K02. Since that ECU is not supported by hondata, I was wondering if we could purchase a RRB-AXX ECU, install it on the car, get it coded by the dealer and then buy the flashro to tune it. Is this possible? If not, which other options do we ha...
by Andros
Thu Aug 06, 2009 10:09 am
Forum: s300 / SManager
Topic: Injector DC drops to 0 randomly
Replies: 1
Views: 1572

Injector DC drops to 0 randomly

The problem we are experiencing is that out of no where the car started to stall at certain rpms, but not always. Fuel pressure is ok (changed the fuel pump just to be sure) and spark time is ok also. As I said the car ran fine for a couple of months. I plugged in my PC and found out that when the c...
by Andros
Wed Apr 22, 2009 10:19 am
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 5504

Please guys, this is the only matter that's holding me back to start the turbo process.

FWIW, it'a a DOHC ZC d16 car.
by Andros
Tue Apr 21, 2009 1:32 pm
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 5504

Ok, got it. Would this distributor work? http://www.torontojdm.com/lite/cart.php?target=product&product_id=3253&category_id=92 And I'm guessing that the extra wires that the obd0 to obd1 harness has need to be routed to the new dizzy (thru the firewall)? Is there a wire diagram for that harn...
by Andros
Tue Apr 21, 2009 12:47 pm
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 5504

But, if I don't change the dizzy, I wouldn't be able to alter the timing, and that would be it, am I wrong?
by Andros
Thu Apr 16, 2009 8:56 am
Forum: Applications
Topic: D16A9 OBD0
Replies: 6
Views: 5504

D16A9 OBD0

I'm about to turbo an old 90 civic and saw that I need the OBD0 to OBD1 connector and use an OBD1 ECU. I also saw that I need a new dizzy and 02 sensor, and I was wondering why do I need these parts? I mean, on another d16a9 engine (on a later model) which had an obd1 ecu as stock, had no o2 sensor ...
by Andros
Thu Apr 16, 2009 8:48 am
Forum: Applications
Topic: Would these ECUs work?
Replies: 7
Views: 4548

Thanks guys!