Search found 15 matches

by schoe
Sun Nov 22, 2009 9:18 pm
Forum: K-Pro Calibrations
Topic: K24 TSX
Replies: 1
Views: 1510

K24 TSX

Hi, I was wondering if I can get a cal for a 2004-2006 TSX reflash... Thanks in advance.
by schoe
Mon Sep 14, 2009 3:41 pm
Forum: K-Pro / KManager
Topic: Radiator Fan
Replies: 2
Views: 971

Kpro serial number: 37820-PRB-305 2054-100569 Kmanager: v1.3.7 Vehicle: Acura TSX I tried to add abit more fuel to cool it down but that didnt work either... The ECT fluctuates around 180-185 in the day (80-85F) and at night 177-185 (68-75F). The outside temp was measured using the car's thermostat...
by schoe
Wed Aug 26, 2009 1:28 am
Forum: K-Pro / KManager
Topic: TSX Kpro with Idle problems, Can I use the K20 idle valve?
Replies: 2
Views: 1671

Im running a dual K-Pro on the TSX also and had rough idling... I set the low speed fuel col 3 and 4 / 750 and 1000 at 748 (running about 12-13:1 AF) and the rough idling disappeared... With the AC on there alittle bit of vibration but thats about it... I have a 5AT though and running w/o FI... Some...
by schoe
Mon Aug 17, 2009 6:38 pm
Forum: K-Pro / KManager
Topic: Radiator Fan
Replies: 2
Views: 971

Radiator Fan

I dunno if K-Pro has anything to do with this, but the fans on the radiator turns on and stays on after 2-3 minutues of idle... Before it used to turn on and off but it stays on until I turn the ignition off...
by schoe
Sat Jul 11, 2009 10:11 pm
Forum: K-Pro / KManager
Topic: turbo tsx, can idle be reflashed?
Replies: 17
Views: 8064

So I am assuming that I should try to tune my idle AF ratio in open loop mode to be 13.1? Also, I've heard that I should keep increasing ignition at idle. What is an unsafe ignition value at idle? How high can I push it? Right now I believe I have it at 25 degrees. I was going to try to play with t...
by schoe
Wed Jul 08, 2009 4:20 pm
Forum: K-Pro / KManager
Topic: turbo tsx, can idle be reflashed?
Replies: 17
Views: 8064

No stalling, but it feels its like its about to stall when it dips below 400-500rpms... Sometimes the idle becomes stable after time but now with this new calibration, it rarely goes away... When I first got the K-Pro, it was fine until one day the rough idling came about... So I installed the O2 re...
by schoe
Tue Jul 07, 2009 5:15 pm
Forum: K-Pro / KManager
Topic: turbo tsx, can idle be reflashed?
Replies: 17
Views: 8064

I also have the same problem where the idling is not stable... Is your car stalling/shutting off? What injectors are you running? Im running stock injectors... I have an auto and in "D", instead of the idle being 600 it fluctuates either from 750 to 600 constantly or dips down below 500 a...
by schoe
Mon Jul 06, 2009 5:14 pm
Forum: K-Pro / KManager
Topic: Recent dyno tune cal
Replies: 1
Views: 750

Recent dyno tune cal

I recently got a dyno tune from a shop and I forgot to ask the tuner to give me a copy of the calibration... I was wondering if I can get that calibration somehow by hooking my own cpu to it... I'm guessing if you connect the cpu and interface with it by pressing F10, does that reflect the current c...
by schoe
Mon Jul 06, 2009 5:10 pm
Forum: K-Pro / KManager
Topic: turbo tsx, can idle be reflashed?
Replies: 17
Views: 8064

I also have the same problem where the idling is not stable...
by schoe
Sun Jun 21, 2009 6:09 pm
Forum: K-Pro / KManager
Topic: How to fix knock w/ cal
Replies: 1
Views: 938

How to fix knock w/ cal

I did a datalog and came up with 81 knocks pulling on 3rd gear (even though the kmanager says 4th)... How do I go about fixing this because it looks like its running alittle rich at 11-12:1... Do I add fuel to that to make it close to 14??? Also, the VTC is supposed to advance to 45 degrees but it o...
by schoe
Thu Jun 04, 2009 5:17 pm
Forum: K-Pro / KManager
Topic: P0340 error code and version error
Replies: 6
Views: 1976

I disconnected/reconnected the battery and now the error code is gone... :)
by schoe
Thu Jun 04, 2009 12:39 pm
Forum: K-Pro / KManager
Topic: P0340 error code and version error
Replies: 6
Views: 1976

It seems like its on and off with the error code. I would turn the car off all the way, plug it in and sometimes its there and some time its not... I did this about 7-8 times and about half of the times it would throw an error and the other half no...
by schoe
Thu Jun 04, 2009 10:59 am
Forum: K-Pro / KManager
Topic: P0340 error code and version error
Replies: 6
Views: 1976

Thank you for your response. I guess the kal loaded once reloaded and I unplugged and replugged and it still gives me the error code but now the kmanagement actually gives me a reading back for the angles. I have one more question... I did some datalogging and the VTC wont go past 26 degrees... I am...
by schoe
Wed May 27, 2009 3:52 pm
Forum: Applications
Topic: KraftWerks K-Series SC kit for K24
Replies: 1
Views: 2847

KraftWerks K-Series SC kit for K24

I was looking through a couple of different SC kits for the TSX and I seen a dyno on the page saying the hondata's RSX was tuned with this same kit. From your experiences, would this kit have major fitment problems with the TSX? Also, it says the air condition compressor has to be removed. Would the...
by schoe
Thu May 21, 2009 11:15 am
Forum: K-Pro / KManager
Topic: P0340 error code and version error
Replies: 6
Views: 1976

P0340 error code and version error

I recently installed a machined VTC in the motor and when I plugged in the laptop to the ECU, this error code came up... http://farm4.static.flickr.com/3355/3551411791_185c5e62e9.jpg?v=0 Would one of the reasons be the sensor wasnt properly installed correctly or did it really go bad? Also when I tr...