Hondata

Please fix this: Graph Plotting ECT2 - Graph without the ECT2 line; and high/low values are shown with FN2 datalog; Display Gauge - Angle starting at 180 and ending at 0, creates a line on the right and values on the left; Properties - In the objects to add to display that have integer values, an ex...

Rev Limit (adjustable) Possibility to use the Rev Limiter in equal way as the Launch rpm adjustable, by choosing in FPM witch limiter to act; one another way is to use the steering wheel buttons to choose from the different limiter (RPM or Launch), by pressing more time. This function could be used...

Hello, Recently the NA calibration used was converted to use the boost columns... and the name Active Fine Tuning came up. The processes describe the concept and some results... follow the link to see the details: https://youtu.be/FxNSB-vrM90 Is it possible to add more rows or columns to the main ta...

Just to share the process...
https://www.youtube.com/watch?v=TLDR6-thsG8

Hello, Rev match while down-shifting. For example the driver is braking and press clutch, the revs increased slightly to engage a lower gear. Turn on the MIL light (check engine light) when the engine is with the FAN ON (this way the driver could wait before shutting the engine/fan). Best regards an...

Hondata wrote: ↑

Sat May 12, 2018 12:27 pm

Those tables only have 10 columns for the FN2 & FD2

Thanks, for the heads up. :)

Hello, For the calibrations for the Civic Type R (2006-2011), FN2 and FD2 some columns are not visible if we select Show all Columns in the Options menu. For example in FN2 calibration, affect only the tables for Knock sensitivity and retard, they show only 10 columns. The Knock ignition limit (High...

Fast switch for Display screens Possibility to assign keyboard shortcuts to display screens. In this way, users switch between various display, just by pressing a selected key in display screen. Car PC Mode Add a new option to allow the FPM start with Display screen in Full Screen and Datalog is en...

Notice one detail, that sometimes the FP hangs with the power in Green light all the time. No action is performed with the datalog button... this happen in a FN2. This issue is possible do to turn the engine off while in datalog. To return to normal operation, disconnecting and connecting would sol...

Notice one detail, that sometimes the FP hangs with the power in Green light all the time. No action is performed with the datalog button... this happen in a FN2. This issue is possible do to turn the engine off while in datalog. To return to normal operation, disconnecting and connecting would solve.

High VTC tables Add a feature to use VTC Tables only in Higher CAM and/or Use VTC Tables with a percentage of Throttle Pedal, RPM or Pressure. AutoSave in FlashPro Manager Use the autosave process when saving a datalog from FP. In Save datalog verify if Autosave datalogs is enable, if so process th...

For the FN2 the indexes are shared between fuel & ignition tables. Is there a distinction between Low and High Fuel & Ignitions index? This is: Changing the low index only, for the fuel and ignition, to use 20 columns and leave the high index (fuel and ignition) with 10 columns; or both High and Lo...

The vehicle in question is a FN2 Euro.

By reindex the low Fuel table from 10 to 20 columns, do the index for the other tables need to be changed? If so, what tables need to be with the same index lenght? As the ECU use uses more than one cell to calculate the fuel, having more cells defined, will contemplate less change for different pre...

Load Index - your settings are set so that the columns above atmospheric show a relative pressure. The edit always uses absolute. Datalog compression - at some point when compressing or decompressing both the compressed datalog and the uncompressed datalog are in memory at the same time, and under ...