Search found 47 matches

by turbo_civic_si
Tue Dec 20, 2005 4:44 pm
Forum: s100/s200
Topic: Injector Cutoff, Funky Ignition & IAT Sensor...
Replies: 2
Views: 1636

stock engine, 3 bar map, 1000cc injectors. i was looking in on it possibly being a ground so i made several new grounds and replaced a few. i have a 4 or a 2 gauge cable from my battery ground to the engine also in hopes of something. last time i had the ground on the waterneck loose, car wouldn't s...
by turbo_civic_si
Tue Dec 20, 2005 11:21 am
Forum: s100/s200
Topic: Injector Cutoff, Funky Ignition & IAT Sensor...
Replies: 2
Views: 1636

Injector Cutoff, Funky Ignition & IAT Sensor...

I did a datalog a little while ago and things do so weird stuff. My ignition looks funky as well as my IAT sensor. Then when I tapped the throttle, i get a problem with spikes in my duty cycle giving me a very rich condition. any help here?
by turbo_civic_si
Tue Aug 16, 2005 3:23 pm
Forum: s100/s200
Topic: Missing Hondata System...
Replies: 0
Views: 2996

Missing Hondata System...

S/N: S200-0468 Been missing for around 2-3 months. little late to post, but doesn't mean i haven't looked for it nor that it can't be found. was bought in 2003 as an upgrade from an S100. Has Boost & Datalog. Does not have 3 Step or G-Sensor. Was removed out of blue box and semi-custom mounted insid...
by turbo_civic_si
Mon Jul 25, 2005 6:17 am
Forum: s100/s200
Topic: Cuttoff of injectors ??
Replies: 14
Views: 5989

if you zoom in, you see the duty cycle just jump to around 88%. i haven't had the time to fully check into it either. i updated the ROM as to 3.6.4. i noticed that the TPS is @ .49V. possibly the problem? don't see why that would make the d/c just up to 88%.
by turbo_civic_si
Sun Jul 24, 2005 9:45 am
Forum: s100/s200
Topic: Cuttoff of injectors ??
Replies: 14
Views: 5989

M:S

13:10
14:42
17:14
by turbo_civic_si
Fri Jul 22, 2005 2:07 pm
Forum: s300 / SManager
Topic: so i download the SManager software...
Replies: 3
Views: 3350

it more than likely will only work with the S300 unit and not the S200. i like the layout and setup of the SManager. Also i like how you can do the software updates and USB driver updates. Can't wait to get my hands on an S300 to toy with.
by turbo_civic_si
Fri Jul 22, 2005 8:46 am
Forum: s100/s200
Topic: Cuttoff of injectors ??
Replies: 14
Views: 5989

could use some help on this. it's getting annoying.
by turbo_civic_si
Fri Jul 22, 2005 8:45 am
Forum: s300 / SManager
Topic: S300 Socketing Question
Replies: 1
Views: 2650

not really. depends on what socket you have in there. if it is a machined socket (round w/round insert), chances are, it will not work. if it is not machined (square socket) the pins would possibly fit, but i would not recommend it b/c it is possible if the unit is not secured, it could possibly get...
by turbo_civic_si
Mon Jul 18, 2005 8:06 am
Forum: s100/s200
Topic: Cuttoff of injectors ??
Replies: 14
Views: 5989

here's the datalog. i'll upload the bin in a few hours. *.rec files are not allowed? Lambda Cal Used: Volts Lambda 0.000 .58 0.624 .64 1.248 .70 1.872 .76 2.496 .82 2.808 .85 3.120 .88 3.432 .92 3.744 .96 4.056 1.00 4.368 1.08 4.992 1.41
by turbo_civic_si
Wed Jul 06, 2005 7:26 am
Forum: s100/s200
Topic: Cuttoff of injectors ??
Replies: 14
Views: 5989

i have an interesting problem with injector cut-off. it is only between 4500-5500 that it occurs. if i let off the gas above 5500 or below 4500 my afr go lean like it should, but when i do it between those ranges it just goes rich. it does it whether i let off from full throtle or if i'm slowly cree...
by turbo_civic_si
Tue Jun 28, 2005 11:30 am
Forum: s100/s200
Topic: 1000 cc RC low impetence injectors
Replies: 14
Views: 5049

the video was really neat. i like watching electronic stuff fry. :twisted: its just hard to breathe afterwards.
by turbo_civic_si
Tue Jun 28, 2005 6:09 am
Forum: s100/s200
Topic: 1000 cc RC low impetence injectors
Replies: 14
Views: 5049

what? nobody goes through hondata's website???

http://www.hondata.com/techlowohminjectors.html

come on now. :) that was a good write up and video.
by turbo_civic_si
Tue Jun 21, 2005 10:06 am
Forum: s100/s200
Topic: I have this, want to do that - what do I need?
Replies: 5
Views: 2164

the programmer is optional and would be used as a final burn. so technically you don't have to get it b/c you can tune with the romulator and then ask someone to burn you a chip with the bin file you tuned. that will save you $180.
by turbo_civic_si
Tue Jun 21, 2005 10:03 am
Forum: s100/s200
Topic: Jumper J12
Replies: 12
Views: 4180

i confirm it still works fine. mine is cut and has been cut on all the ecus i've soldered for hondata.
by turbo_civic_si
Wed Jun 15, 2005 6:14 am
Forum: s100/s200
Topic: help hooking up Romulator and datalogging with 1 serial port
Replies: 6
Views: 2241

you need two serial ports to use datalog and romulator.