Hondata

hi,

A friend of mine with prelude h22a model 97-01 and stock ecu P5M (OBD2). Do you think his car can be used with ecu hondata s300? Because i checked through your web, it doesn't mention about the ECU P5M

hi i wonder what the LED at the ecu doing? When i turn to acc, the LED turn from red to green indicate i can start up the car. There is one time, when the LED is red, i try to start up the car, it only cranking but can't start up. My question is why sometimes the LED turn green quickly and other tim...

hi gigaCTR.. So what does the cam angle mean? Can i just simply advance the cam angle to get horsepower? How much advance can i actually go for an aftermarket camshafts?

hi,
i'm confuse over the cam angle in the k-pro. Is 0 degree cam angle mean the camshafts is retarded to 0 degree BTDC? is 50 degree cam angle set in k-pro means the camshafts is 50 degree BTDC? could any one gives explanation?

jonathon :?

hi,
i noticed under the fuel table, the maximum allowable tuning is up to 8000rpm only. Where can i tune the fuel at 9000++rpm? if i want to rev up more than 8000 rpm

ok, put it this way. My car is civic eg 2doors with h22a engine in it. I have this mod: skunk2 pro-series camshafts stage 1 skunk2 intake manifold 70mm throttle body high comp pistons 11.5:1 The car run well with stock ecu except i have idle problem. This is the reason why i choose hondata s300 to s...

yes the smanager stated that it has been connected. Unfortunately, my check engine light is not connected to ecu. So it wont light up. But when i plug in my original ecu to my car. The car can start up. but not the hondata ecu. I try to figure out if there is sensor fault in my car. Do you think the...

whenever i turn my ignition, the usb port show red light and i could not start the car. What does the red light and green light indicate? I ever try to plug my hondata to my friend car. The usb port flash green light and the car be able to start up.

hi,
The usb port at the hondata ecu got red and green LED. What does the red and green light indicate?

thanx

hi,
sorry, yup it is calibration.Initially im using 50% for my cranking fuel. But it cannot start up. THat why im increase it to 100%. But still can't start up. What do you think the problem?

hi, my h22a civic having trouble with cold start.I can't start my car in the morning. I have to use my stock ecu p13 tto warm up my car. After the car has warm up, It is easy to start with s300 ecu. I attach my datalog to you. Could you help me to check what wrong with the cold start?Everything is f...

Hi, sorry for the long delay, may be of some use to people still, let me know what you think of it, only problem with my car is that the emissions (CO) are a bit high! Mat Hi mat, i have a civic h22a with skunk2 pro-series camshafts in it. It does not idle smoothly. How about yours? could your car ...

hi, my civic h22a engine can't idle below 1000rpm. I have try to make adjustment in the idle setting of ecu s300. But the problem still can't be solved. Why is this so? now i have to idle at 1200 rpm to prevent stalling.my engine mod is: - skunk2 camshafts pro-series stage 1 - skunk2 intake manifold...

hi, i'm new to this hondata s300. when i plug the s300 to my h22a civic, my car hesitate and cannot idle well. One other problem it can't rev higher then 5000 rpm.The car is rough throughout the rpm (misfire i guess) I have already calibrate using h22a map with injector trim to 290cc. But never solv...