Search found 14 matches

by bseriesluver
Tue Sep 07, 2010 2:52 pm
Forum: Romeditor 4 Software
Topic: romeditor4 fuel cut
Replies: 2
Views: 13554

thats all i want to know
thank you
by bseriesluver
Tue Sep 07, 2010 12:16 pm
Forum: Romeditor 4 Software
Topic: romeditor4 fuel cut
Replies: 2
Views: 13554

romeditor4 fuel cut

ok after tune and dyno, car runs perfect and very nice. burn the chip as bin.file. plug it in. runs very nice. but after i took out the blue box and cover the ecu. then test drive it again, fuel cut at 4k rpm. Then i plugged blue box back in, it drives normal again. my question is: i want to take bl...
by bseriesluver
Fri Sep 03, 2010 11:58 pm
Forum: Romeditor 4 Software
Topic: romeditor4 tuning
Replies: 5
Views: 15207

fixed
option setting
0-10 and 5-20 at lamda overlay, so everything works normally
by bseriesluver
Wed Sep 01, 2010 12:33 pm
Forum: Romeditor 4 Software
Topic: romeditor4 tuning
Replies: 5
Views: 15207

yes everything is plugging, analog out (there are 3 wires, ground, red, white). i plug white wire to d10, red wire to d14, black wire to ground. like i said it was reading but its not reading right, i stumped on the gas pedal it shown 10.0 but it shown 14.5 on lamda overlay at idle.
by bseriesluver
Tue Aug 31, 2010 1:08 pm
Forum: Romeditor 4 Software
Topic: romeditor4 tuning
Replies: 5
Views: 15207

i am using innovate LM1 wideband, power hooked on, serial port hooked on, wideband sensor hooked on, i hooked analog output to d14 on computer side and ground
by bseriesluver
Tue Aug 31, 2010 12:50 pm
Forum: Romeditor 4 Software
Topic: romeditor4 tuning
Replies: 5
Views: 15207

romeditor4 tuning

i have hooked up everything and i ready to tune. i opened screen up and click to datalogging it shows most of the sensor except AF. AF not reading right. leave on lamda it shows 0, change to afr it shows 10.0:1. step on the gas pedal it starts moving but it stopped.
woul you help me please
thank you
by bseriesluver
Thu Aug 19, 2010 10:53 am
Forum: Romeditor 4 Software
Topic: romeditor4 with ostrich
Replies: 1
Views: 12544

romeditor4 with ostrich

does romeditor4 works with ostrich v1?
thank you
by bseriesluver
Tue Jul 13, 2010 10:36 pm
Forum: Romeditor 4 Software
Topic: s200 with romeditor 4 cable
Replies: 1
Views: 12565

s200 with romeditor 4 cable

im using s200 to tune my car with boost. but my s200 has no boost option. but i just bought the romeditor 4 cable. so do i have to pay for boost option to get the car tune with boost.
thank you
by bseriesluver
Fri Feb 19, 2010 3:03 pm
Forum: s100/s200
Topic: s200 hondata romeditor 4 unlock code help
Replies: 1
Views: 3145

s200 hondata romeditor 4 unlock code help

i bought the romeditor 4 from the tunner, but he didnt give me the unlock code for it. i came back there and ask him for the unlock code. but the tunner was moving out of town. so what can i do? how i can get the unlock code?

thank yoiu
by bseriesluver
Thu Feb 18, 2010 8:41 pm
Forum: s100/s200
Topic: s200 need help
Replies: 1
Views: 2680

s200 need help

i bought the s200 without boost option, but i have bought the romeditor4 cable to update the s200, so do i need to buy boost option for my s200?
than you
by bseriesluver
Thu Feb 18, 2010 12:09 am
Forum: s100/s200
Topic: s200 hondata for burning chip
Replies: 3
Views: 4749

what do u mean by romeditor4 serial number?
by bseriesluver
Sat Jan 23, 2010 8:58 am
Forum: s100/s200
Topic: s200 hondata for burning chip
Replies: 3
Views: 4749

s200 hondata for burning chip

i have s200, and i have updated with the cable. i have not install s200 on the my car yet. i have not tune my car yet, but i have socket everything in my ecu p28. ok i opened the base map with romeditor 4 and i go to save as and save file as bin file then i used burn1 chip programmer and burned the ...
by bseriesluver
Wed Oct 14, 2009 12:19 am
Forum: Applications
Topic: ek civic swap b18 obd2->obd1 ecu help
Replies: 2
Views: 4473

spunker

today i bought ex ewh 5 speed. i chopped it off and rewire my self instead use jumper harness. i use boomslang write up. but it still got the same problem
so do you have any wiring conversion write up. so i can compare them again.
thank you
by bseriesluver
Tue Oct 13, 2009 10:24 am
Forum: Applications
Topic: ek civic swap b18 obd2->obd1 ecu help
Replies: 2
Views: 4473

ek civic swap b18 obd2->obd1 ecu help

i swapped for my 98 civic hb i used b18b obd2 engine, i used original ewh and mod for iav and iat. then i used obd2 conversion to obd1, i used obd1 p75 ecu with s300, after done everything i start the car, the car runs like sh*t. sound like off timing. then i switched it back to obd2 ecu p2e it soun...