Search found 102 matches

by engjoo
Mon Apr 15, 2013 7:51 am
Forum: FlashPro Calibrations
Topic: Differnce between Stock equivalent and "return ecu to stock"
Replies: 5
Views: 6002

Re: Differnce between Stock equivalent and "return ecu to st

Thanks for the replies. I understand that a AFM and MAP calibration will run differently, however I'm simply puzzled to how the AFM stock equivalent calibration would cause knocks while the "return to stock" wouldn't as I would like to use the stock ignition for my stock (for now) Si. I a...
by engjoo
Wed Feb 01, 2012 10:22 am
Forum: FlashPro Manager
Topic: Knock control
Replies: 4
Views: 3356

Re: Knock control

Knock control is related to the ECU's estimate of the fuel octane. Normally it will decrease without knock, and increase with any knock. Do you know why am I seeing such a big difference in knock control between RTS and my hondata tuned maps ? Are the native knock tables the same between stock ECU ...
by engjoo
Tue Jan 31, 2012 10:15 pm
Forum: FlashPro Manager
Topic: Knock control
Replies: 4
Views: 3356

Knock control

May I know what does "Knock control" in the datalogging means? I did a RTS followed by a datalog this morning on my car (FD2R) and noticed that it is always in 95-100% range. On the other hand, my tuned maps fluctuates between 0% to 50%.
by engjoo
Sat Jan 21, 2012 10:11 pm
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 6024

Re: flashpro connects and locks to fn2 , wont upload or unlo

I think you current sw cannot work with this firmware which is a newer version.

As I do not know of anyway to downgrade the firmware, you may have to upgrade the software to 1.2.2 instead.
by engjoo
Sat Jan 21, 2012 6:14 pm
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 6024

Re: flashpro connects and locks to fn2 , wont upload or unlo

I see that your firmware for the flashpro unit is 40.

40 comes from v1.2.0 onwards. Have you tried using v1.2.2 which is the current version?
by engjoo
Thu Jan 19, 2012 4:32 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Multiple ECU programming modes
Replies: 6
Views: 14122

Re: Multiple ECU programming modes

So does the different mode still function properly after flashing with flash pro?
by engjoo
Fri Jan 06, 2012 12:50 am
Forum: FlashPro Manager
Topic: Temperature compensation for fueling and ignition
Replies: 2
Views: 2037

Re: Temperature compensation for fueling and ignition

Usually the tables are either calculated (ie not a lookup table) or in a form that can't be presented for editing (which is essentially the same thing). I'm never had to change any of temp compensation tables in any of vehicles. OK. Thank you for clarifying. I suspected (I hope I was wrong) that so...
by engjoo
Fri Jan 06, 2012 12:46 am
Forum: FlashPro Manager
Topic: can't upload calibrations and ecu is stuck in recovery mode
Replies: 11
Views: 6090

Re: can't upload calibrations and ecu is stuck in recovery m

This is indeed troubling!

Just to be safe, I would suggest not uploading any calibration to the ECU when you are in a remote location or place which you cannot leave the car unattened for long duration!
by engjoo
Wed Dec 21, 2011 6:39 pm
Forum: FlashPro Manager
Topic: Temperature compensation for fueling and ignition
Replies: 2
Views: 2037

Temperature compensation for fueling and ignition

I see that some calibrations has compensation for both fueling and ignition (eg TSX-07-MT-1). Some only has fueling (eg CRZ-JP-1). Is it because such compensation do not exist to begin with from the factory or was it a feature that Hondata cannot implement? What are the implications of not having su...
by engjoo
Fri Oct 28, 2011 7:04 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: Weird knocks in cylinder 3
Replies: 35
Views: 22330

Re: Weird knocks in cylinder 3

Does the knock count increase when the engine gets hot? No. Same. I don't track nor push the car hard. Just normal driving to and from work. Let me say again the factory map don't knock under the same condition. All these are done over extended period of monitoring (ie I would drive for 1 week on e...
by engjoo
Sun Oct 16, 2011 7:50 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: Weird knocks in cylinder 3
Replies: 35
Views: 22330

Re: Weird knocks in cylinder 3

since the ecu with flashpro cannot differentiate the false knock (normally sounds from race headers) and the real knock... you will need a knock mic with the head-phone to do that. But the problem is the knock only comes after 1-2 days and get worst over time. If that is so, then you will need to h...
by engjoo
Sun Oct 16, 2011 5:41 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: Weird knocks in cylinder 3
Replies: 35
Views: 22330

Re: Weird knocks in cylinder 3

august77 wrote:since the ecu with flashpro cannot differentiate the false knock (normally sounds from race headers) and the real knock... you will need a knock mic with the head-phone to do that.
But the problem is the knock only comes after 1-2 days and get worst over time.
by engjoo
Thu Oct 13, 2011 12:01 am
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: Mugen RR
Replies: 21
Views: 29256

Re: Mugen RR

engjoo: Yes, when performing to RTS, the stock map will be from Hondata. The Mugen ECU uses the same ECU as the FD2R.. so, you should be able to reflash it using FlashPro. As the Mugen ECU on the RR is limited and hard to come by... I would leave the Mugen ECU alone. Goodness. How would I know if m...
by engjoo
Tue Oct 11, 2011 7:43 pm
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: Mugen RR
Replies: 21
Views: 29256

Re: Mugen RR

Hi one of my customers has a original FD2 Mugen RR. I would like to supply him with a FP. But he had a few questions that i want to clarify before i proceed with the tune and the sale. 1) If he was to "return ECU to stock" would it flash back the original map that came on the car? or a st...
by engjoo
Tue Oct 11, 2011 7:41 pm
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: Mugen RR
Replies: 21
Views: 29256

Re: Mugen RR

Hi one of my customers has a original FD2 Mugen RR. I would like to supply him with a FP. But he had a few questions that i want to clarify before i proceed with the tune and the sale. 1) If he was to "return ECU to stock" would it flash back the original map that came on the car? or a st...