Search found 20 matches

by djarmyssg
Thu Jun 04, 2015 2:49 pm
Forum: K-Pro / KManager
Topic: Nitrous Control Arming Issue
Replies: 3
Views: 1618

Re: Nitrous Control Arming Issue

Ok Still having the same issue, 2001 Civic HX Turbo Kpro V2 Kmanager 4.1.1.0 I have attached an LED to the Float switch in line to the ECU to verify that the switch wasnt dropping the ground. LED remained lit even during the Arming Drop. Still not sure why it keeps dropping the ARM.... But if I clic...
by djarmyssg
Thu May 07, 2015 7:45 am
Forum: K-Pro / KManager
Topic: KManager V4.1.4
Replies: 19
Views: 12761

Re: KManager V4.1.0 (beta)

Another glitch... When looking for "New Calibration".. Calibrations seem to be pushed down beginning at the s2000. IE.. s2000 maps are in D17 dropdown.. d17 maps are in the OTHER dropdown.. and one set of d17 and LOTUS Cals are missing completely...
by djarmyssg
Fri Feb 27, 2015 1:39 pm
Forum: K-Pro / KManager
Topic: Datalogging disconnects during wot
Replies: 15
Views: 4969

Re: Datalogging disconnects during wot

Random information..... Another issue tha can cause disconnect can be Spark plug GAP... Especially on boosted applications. To big of a gap can cause spark blowout which will cause a surge that will force disconnect Kmanager.... I had it happpen all the time on WOT... lessened the Gap... no Blow out...
by djarmyssg
Wed Sep 24, 2014 7:13 am
Forum: K-Pro / KManager
Topic: Target Lambda issue
Replies: 3
Views: 1552

Re: Target Lambda issue

Sorry.. Currently running Kmanager Version 3.3.1.0

Also some things I forgot to add

2001 Civic Turbo'd
Kpro Serial # 886
by djarmyssg
Tue Sep 23, 2014 6:56 pm
Forum: K-Pro / KManager
Topic: Target Lambda issue
Replies: 3
Views: 1552

Target Lambda issue

Ok, I have my IDLE Target Lamdba set to 15.7 in Kmanager. But no matter what I put in the input box. My ACTUAL Target AFCMD doesnt change from 14.7 at idle. I can set my "TARGET" to 21:1 and it will still show a command target of 14.7:1 and adjust my AFR to 14.7:1 via closed loop operation. NOW with...
by djarmyssg
Wed Sep 10, 2014 7:52 am
Forum: K-Pro / KManager
Topic: Nitrous Control Arming Issue
Replies: 3
Views: 1618

Nitrous Control Arming Issue

Ok. I have a Meth Injection Kit installed. I Have a Float Switch installed for the Arming mechanism. The switch is wired from a good Ground to the switch, then from the switch to E16. I have the Invert Arming Input box Checked. It shows armed when full. Disarmed when close to empty. So everything wo...
by djarmyssg
Thu Oct 03, 2013 8:11 am
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Another Update...

Socketed a new ECU, Installed the S300... Everything seems to have worked.. So ALL IS WELL..... Thanks for all the help!
by djarmyssg
Thu Aug 15, 2013 2:45 pm
Forum: K-Pro Calibrations
Topic: D17A2 Fully Built Calibration Anyone?
Replies: 3
Views: 2357

Re: D17A2 Fully Built Calibration Anyone?

I have a D17, Wiseco 8.8:1, Crower stge 2 turbo cam, Crower spring and retainers. return fuel system, SRT stage 1 injectors. U can try this map, Just change the Map sensor setting, and see where it puts u.
by djarmyssg
Mon Jul 22, 2013 1:14 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Well, Im going to chip another ECU hopefully tonight and check the S300 itself again, If that doesnt work, then I'll send the email.. I want to cross all my t's and dot all my I's before I send the s300 in... Will update hopefully tommorow...
by djarmyssg
Mon Jul 22, 2013 12:22 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Ok lil update... I installed a new 74hc373 chip (used 60/40 solder), and tested again.... Still had the same issue.. Uploaded a new map... and tried again.. this time the car wouldn't even start and I still had the CEL. Code 0..... Next thing i know, I cant even upload a map... I just get the "Map f...
by djarmyssg
Fri Jul 12, 2013 7:32 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

unfortunately, I do not have access to another ECU that I can install S300 into, Aside from buying another ECU and pinning it to accept the S300, Which doesnt seem to be a feasible idea. As for dropping the the rev limit, I have tried that, also changed high and low fuel tables to 0 across the entir...
by djarmyssg
Fri Jul 12, 2013 10:21 am
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Well i havent removed any of the solder, so its still the led free stuff, but I did check each Pin and chip connector one by one for continuity to its test points on the ECU board itself.. Every connection has 0.1 Ohm, so that means the connections are good, so now that leads me to beliece theres a ...
by djarmyssg
Wed Jul 10, 2013 6:37 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Ok well a buddy of mine swung by just long enough for me to hook up the ECU... Still doing the same thing, but I did notice that when I datalogged the only sensors that showed ANY movement were the analog inputs they were flipping around .03-.07 Volts.... But other than that... nothing new...
by djarmyssg
Wed Jul 10, 2013 4:15 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Just wondering... if I have to send it in... How much does that normally run?
by djarmyssg
Wed Jul 10, 2013 4:14 pm
Forum: s300 / SManager
Topic: S300 worked for 10 minutes then stopped, Doesnt work now
Replies: 21
Views: 4601

Re: S300 worked for 10 minutes then stopped, Doesnt work now

Aight... Well until friday then.... Thanks!