Search found 186 matches

by RMS
Sat Dec 15, 2012 3:20 pm
Forum: s300 / SManager
Topic: need clarification of crank fuel compensation ms vs %
Replies: 1
Views: 1968

need clarification of crank fuel compensation ms vs %

from the s300 help: Changing the injector size will automatically compensate the fuel tables for the rating of the injector (but not for the specific characteristics of the injector). Also the cranking fuel and throttle tip in fuel are compensated based on the injector size . my question: cranking f...
by RMS
Sun Nov 29, 2009 7:17 pm
Forum: s300 / SManager
Topic: af changes when switching from closed to open loop
Replies: 3
Views: 2262

thank you for the reply, but that's covered. target voltage is .51V and when the closed loop is engaged and the fuel goes rich there is no short or long term trim indicated. it continues to do this even with the wbo2 wire removed from the ecm connector. even started a new rom from scratch and just c...
by RMS
Sun Nov 29, 2009 2:06 pm
Forum: s300 / SManager
Topic: af changes when switching from closed to open loop
Replies: 3
Views: 2262

af changes when switching from closed to open loop

i have a problem car that i'm helping with. tunes fine on open loop but goes dead rich immediately when closed loop box is checked. i set all compensation trims to 0 just to try with no difference. timing does not change appreciably. any ideas before i shoot the ecu and start over?
by RMS
Sun Nov 29, 2009 2:02 pm
Forum: s300 / SManager
Topic: radiator fan switch overide Not working
Replies: 7
Views: 6651

ecu has a bad driver in it... does your o2 heater control work? easy fix, i see it quite often.
by RMS
Sat Feb 11, 2006 9:04 pm
Forum: Applications
Topic: S300 for 01 USDM Prelude non-SH
Replies: 2
Views: 2025

the rectangular framed ecus must be used for the s300. usdm p72 have both the iab and knock sensor, but any obdI civic or integra ecu can have iab control added. so the knock is really the big decision for you. your harness's ecu plug will not connect directly to an obdI ecu so you have two choices:...
by RMS
Thu Feb 09, 2006 11:32 pm
Forum: s300 / SManager
Topic: Vacuum question
Replies: 4
Views: 3279

tip for drilling and tapping the mani without removing it: remove the vac line from the fpr. attach a blow gun into it. while you drill and tap have a buddy apply air pressure through the vac line. the chips will be blown out as you machine the hole (so wear safety glasses!). golden eagle vac logs w...
by RMS
Thu Feb 09, 2006 11:26 pm
Forum: s300 / SManager
Topic: Hondata S300 Nightmare (Updated--Nightmare no more)
Replies: 37
Views: 23070

post your skl file and a datalog with the engine exibiting the problem. it would be great if you have a wideband o2 that can be dl'd, too. post it here or feel free to email it to me directly.
by RMS
Thu Feb 09, 2006 11:07 pm
Forum: s300 / SManager
Topic: s300 iab problem
Replies: 8
Views: 5321

aman had a totally different problem... i had several emails with him personally. honestly, it sounds like a tuning issue. if you post your skl file and a datalog that includes the engine displaying the issue (must have wideband o2 in the dl) then someone may be able to help you on here. i'd be happ...
by RMS
Wed Feb 01, 2006 11:26 pm
Forum: s300 / SManager
Topic: LSvtec Basemap (RMS Help)
Replies: 6
Views: 4305

'email me.

are the injectors sat or p&h?
by RMS
Wed Feb 01, 2006 1:51 am
Forum: s100/s200
Topic: Throwing O2 sensor CEL after tuning on Hondata
Replies: 29
Views: 17855

no, just converting the file should fix you up :)
by RMS
Tue Jan 31, 2006 11:27 am
Forum: s300 / SManager
Topic: Hondata S300 Nightmare (Updated--Nightmare no more)
Replies: 37
Views: 23070

to clarify: 1996 was the changeover for iab.
by RMS
Mon Jan 30, 2006 1:43 pm
Forum: s300 / SManager
Topic: Hondata S300 Nightmare (Updated--Nightmare no more)
Replies: 37
Views: 23070

the solenoid is the same, just the wiring is different. the other reason i rarely suggest modifying the engine harness is that then you can't just pnp the stock ecu anymore. obdI one side of the iab sol wiring goes to ign pwr the other side goes to the ecu where it is activated by a ground signal fr...
by RMS
Sun Jan 29, 2006 10:30 pm
Forum: s300 / SManager
Topic: Hondata S300 Nightmare (Updated--Nightmare no more)
Replies: 37
Views: 23070

first, the iab fix recommended by carchitech is the best fix , though trying to explain it has ended up with dozens of questions for me in the past. EFI University IS NOT SOME HOLY GRAIL OF TRAINING FOR TUNERS. simply attending their class does not make you an expert in tuning various different tuni...
by RMS
Sun Jan 29, 2006 10:07 pm
Forum: s300 / SManager
Topic: Tunning Problem s300
Replies: 4
Views: 3344

is the 12.3 from the internal log then?
by RMS
Sun Jan 29, 2006 11:25 am
Forum: s300 / SManager
Topic: Tunning Problem s300
Replies: 4
Views: 3344

when you unplug the usb do you disconnect/reconnect ANYTHING on the ecu harness/plug? change o2 wire, eld, etc.? also, are you comparing the datalog to you wbo2 display or are you looking at the wbo2 display with and without the usb? something to try: disable closed loop. allow the car to idle. watc...