Search found 129 matches

by Knox
Tue Mar 01, 2016 7:23 am
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 20
Views: 9829

Re: K20A ITR datalog

IT is interpolating between cells and it is displaying a whole number rounded from 32.5 which is 33. This is a old thread but I'm still having same problem. Please do not reply me again "whole number rounded..." I attached my calibration and my datalog and if you check it there is 4 degre...
by Knox
Mon Feb 29, 2016 1:33 pm
Forum: s300 / SManager
Topic: High timing at idle
Replies: 6
Views: 2898

Re: High timing at idle

It is reading the timing directly from the tables exactly as it should. It is still cold and idling high. You should let it fully warm up before trying to set or adjust the timing at the distributor. Hi spunkster, Should I sync ignition timing between ecu and distributor before tuning? If I turn to...
by Knox
Wed Feb 17, 2016 3:32 pm
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 5815

Re: Ecu adds 20% fuel on WOT

It does not look like the engine is fully warmed up, or you have either a low temp or no thermostat. You can also look at the Minimum compensation - laod based table in the fuel compensation tab. thanks spunkster, this car has low temp thermostat as you understand. this applies only at wot or does ...
by Knox
Wed Feb 17, 2016 2:54 am
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 5815

Re: Ecu adds 20% fuel on WOT

Spunkster

On this datalog you can clearly see that ecu adds %13 fuel after 13th second of the datalog. Before this datalog ecu add around %20 fuel at wot but I don't know why sometimes ecu adds less fuel. This datalog recorded with the calibration I attached before.

Thanks
by Knox
Thu Jan 07, 2016 3:08 am
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 5815

Re: Ecu adds 20% fuel on WOT

You need to get a datalog showing the issue, a screenshot does not give enough info. I understand that screenshot does not give enough info but I don't have datalog for that car at the moment. I call my friend and want to come back to me again to have datalog. For now I attach the calibration and t...
by Knox
Wed Jan 06, 2016 11:55 am
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 5815

Re: Ecu adds 20% fuel

Please provide more information as per the posting guidelines. Yesterday I tuned a eg civic with b18c type r engine. After 20 minutes of tuning (without a problem) ecu starts to add 20% fuel at WOT on "ECT corretion%" digital gauge under display tab. Immediately I checked ect fuel compens...
by Knox
Wed Jan 06, 2016 2:06 am
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 5815

Ecu adds 20% fuel on WOT

Hi, sometimes I see that ecu adds around 20% fuel on ECTcorrection % at wot.
Note: Fuel compensation table is "0" at that coolant temp compensation table.

Why ecu adds that much fuel even coolant temp compensation table is zero at that temperature?
by Knox
Mon Nov 30, 2015 12:02 pm
Forum: s300 / SManager
Topic: High map pressure on idle
Replies: 2
Views: 1218

Re: High map pressure on idle

Spunkster wrote:The throttle is probably not closing all the way. This is a common issue with large aftermarket throttle bodies and also when the idle controller is removed.
Hi, there is a leakage on throttle gasket.
Thanks for reply.
by Knox
Sat Nov 28, 2015 4:06 pm
Forum: s300 / SManager
Topic: High map pressure on idle
Replies: 2
Views: 1218

High map pressure on idle

Hi, today I installed skunk2 ultra street manifold with skunk2 70mm throttle body and car doesn't idle like it should be. It idles around 60kpa which is 5th column in hondata smanager. I check there is no vacum leakage, I checked the wirings for map sensor etc but I couldn't find the problem. Where ...
by Knox
Thu Oct 22, 2015 5:16 am
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 128
Views: 75668

Re: KPro / KManager requests

cold start idle rpm ect compensation, rev limit by gear, ignition cut.
by Knox
Fri Oct 02, 2015 8:14 pm
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 128
Views: 75668

Re: KPro / KManager requests

Hondata wrote:Max vehicle speed would be easier, but would just maximum gear be better still?
Is it possible to add these features?
Rev limit by gear and adjustable idle rpm by ect like s300.
by Knox
Wed Sep 16, 2015 11:34 pm
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 128
Views: 75668

Re: KPro / KManager requests

Adjustable cold start rev control like s300.
by Knox
Wed Aug 05, 2015 2:14 am
Forum: s300 / SManager
Topic: Fuel pump primes continously
Replies: 3
Views: 1809

Re: Fuel pump primes continously

Serial number on the s300 is 32589 and the software that I'm using is the latest version 2.4.4.0. I tuned this car 1 month ago without a problem after that I starts to make this problem and car doesn't start. I check the car with an other p28+s300 andits working great after that I check the s300(325...
by Knox
Tue Aug 04, 2015 3:21 pm
Forum: s300 / SManager
Topic: Fuel pump primes continously
Replies: 3
Views: 1809

Fuel pump primes continously

Hi, I upload the calibration and ecu shows that I'm online and datalog sensor readings but map sensor read 4600 kps and fuel pump primes in every 2-3 seconds. Is there someone who have this problem before? Note: map sensor is stock and it shows 4600kpa but sometime for just a second it shows 100kpa ...
by Knox
Mon Jul 06, 2015 7:28 am
Forum: s300 / SManager
Topic: deatschwerks injectors
Replies: 15
Views: 4547

Re: deatschwerks injectors

also on flashpro manager and deatschwerks website did not match each other. on "civic si race dw600" calibration it shows that at 12v 1190ms but deatschwerks website shows that 750ms. http://www.deatschwerks.com/products/fuel-injectors/sport-compact/honda/civic/k20-k24/2002-11-k20-k24/21u-...