Search found 206 matches

by curtusz
Thu Feb 20, 2014 4:23 pm
Forum: K-Pro Calibrations
Topic: cam advance limits
Replies: 2
Views: 1348

Re: cam advance limits

problem solved ... re run aother datalog seems to achieve over 44 now
by curtusz
Thu Feb 20, 2014 10:37 am
Forum: K-Pro Calibrations
Topic: 05 ctr jrsc map
Replies: 6
Views: 2011

Re: 05 ctr jrsc map

The aim is no knock... Knock can damage the engine can u datalog?
by curtusz
Thu Feb 20, 2014 10:36 am
Forum: K-Pro Calibrations
Topic: 05 ctr jrsc map
Replies: 6
Views: 2011

Re: 05 ctr jrsc map

It basically shows u live if your engine is knocking a couple of knocks a hour is allegedly okay, but enable it your engine management light will flash if u experience knock... Try that Euro civic jrsc base map with 550cc injectors that ppreloaded on kmanager just change your injector size like u said
by curtusz
Thu Feb 20, 2014 5:56 am
Forum: K-Pro Calibrations
Topic: 05 ctr jrsc map
Replies: 6
Views: 2011

Re: 05 ctr jrsc map

you got it .....make fuel adjustments to suit but make sure "mil flash knock detected" is enabled . if mil starts flashing or knock in datalog u need to retard ignition .. what ecu do u have ? pra (euro r)
by curtusz
Wed Feb 19, 2014 1:22 pm
Forum: K-Pro Calibrations
Topic: K20A tuning
Replies: 3
Views: 2427

Re: K20A tuning

A/f should maybe Try leaning that out to say 13.2 on wot in high cam lower your vtec to say 4500-5500 try cam angles around 40 degrees in high cam enable your knock mil flash log a 3rd gear pull retard ignition where knock occurs by 2 units a time (not percent)
by curtusz
Wed Feb 19, 2014 1:13 pm
Forum: K-Pro Calibrations
Topic: K20A tuning
Replies: 3
Views: 2427

Re: K20A tuning

Your running high cam from 7500?
by curtusz
Tue Feb 18, 2014 6:02 pm
Forum: Non-Hondata
Topic: k20 ep2 conversion harness ? htune help ?
Replies: 2
Views: 3617

Re: k20 ep2 conversion harness ? htune help ?

you checked windows drivers ?
by curtusz
Tue Feb 18, 2014 5:52 pm
Forum: K-Pro Calibrations
Topic: I need a tuned map for a stock Euro EP3 K20A2. Help please
Replies: 29
Views: 11951

Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea

I tried this map got some knocks .... best things to do is retard ignition where knock occurs ... eventually you wont have any ... make sure u got a a/f gauge .... but sure try it
by curtusz
Tue Feb 18, 2014 5:42 pm
Forum: K-Pro Calibrations
Topic: cam advance limits
Replies: 2
Views: 1348

Re: cam advance limits

btw my motor is k20a2 pra
by curtusz
Tue Feb 18, 2014 5:18 pm
Forum: K-Pro Calibrations
Topic: cam advance limits
Replies: 2
Views: 1348

cam advance limits

just checked on my datalog cam advance set to 50 degrees ... actual cam only gets to 44 degrees .....is this normal ? anybody else notice this?
by curtusz
Tue Feb 18, 2014 5:03 am
Forum: K-Pro Calibrations
Topic: pra, k20a2, 4-1, 2.5 catback no rbc
Replies: 27
Views: 7796

pra, k20a2, 4-1, 2.5 catback no rbc

this map made 205whp (230-240bhp) on dynojet (vd) still need to iron out a/f but close enough for me to be happy vtec is at 4500 limit is 8600 (will show 9000 on cluster) base map is from euro r .. cam advance is at 50 in high cam tapered off in last 1000 or so revs ...and low cam steps up just befo...