Search found 206 matches

by curtusz
Thu Mar 17, 2016 8:13 am
Forum: K-Pro Calibrations
Topic: pra, k20a2, 4-1, 2.5 catback no rbc
Replies: 27
Views: 7782

Re: pra, k20a2, 4-1, 2.5 catback no rbc

You can try it for sure do u have a/f gauge ?
by curtusz
Thu Mar 17, 2016 4:35 am
Forum: K-Pro Calibrations
Topic: pra, k20a2, 4-1, 2.5 catback no rbc
Replies: 27
Views: 7782

Re: pra, k20a2, 4-1, 2.5 catback no rbc

It's is with a 4-1 race header UK spec I don't run this map anymore I've built another custom map as I run rbc and 70mm throttle body, just use a Basemap
by curtusz
Sat Dec 19, 2015 7:54 am
Forum: K-Pro / KManager
Topic: Kpro Issue
Replies: 13
Views: 4295

Re: Kpro Issue

Mine used to do the same, it was a daughter board communication error on kpro v3 now I'm upgraded to kpro v4 I haven't had an issue , it only ever happened when I first cranked it up , never whilst driving
by curtusz
Wed Nov 18, 2015 9:44 am
Forum: K-Pro / KManager
Topic: PRB showing up as PRA in K Manager
Replies: 3
Views: 1162

Re: PRB showing up as PRA

Pra is the standard ecu in uk unless you have an import
by curtusz
Fri Sep 04, 2015 3:09 am
Forum: K-Pro / KManager
Topic: LEAN SPIKES pls help potential harm?!
Replies: 2
Views: 1235

Re: LEAN SPIKES pls help potential harm?!

19 and 32 way too high should be idling at stoich 14.7 wide open throttle between 12.5-13.5 and boosted 10.5-12 these are rough estimates, there is potential harm with lean mixtures with detonation... But with 19 and 32 I would suspect you car runs like crap
by curtusz
Mon Aug 17, 2015 9:37 am
Forum: K-Pro / KManager
Topic: S2000 KPro A/C issue with new KmanagerV4
Replies: 18
Views: 5041

Re: S2000 KPro A/C issue with new KmanagerV4

If it newer than 2 months old then yes but I will have to check my laptop il report back tonight
by curtusz
Mon Aug 17, 2015 7:37 am
Forum: K-Pro / KManager
Topic: S2000 KPro A/C issue with new KmanagerV4
Replies: 18
Views: 5041

Re: S2000 KPro A/C issue with new KmanagerV4

I don't seem to have an issue on my kprov4 pra K20a2 ep3, I find I get a slight rev drop on fans kicking in or a/c on and off... But nothing really different over factory... But revs fo hang sometimes around 1500 until I drive less than 3mph then it settles down to my set 1000rpm idle
by curtusz
Tue Aug 11, 2015 10:25 am
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

Yeah sounds like it wiring issue to me too, I'd start with the easy stuff checking all grounds good clean contacts, please update once u found out the problem
by curtusz
Sat Aug 08, 2015 12:30 pm
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

So u checked on your friends aftermarket wideband and it's fine? And it's bad on the oem sensor?
by curtusz
Thu Aug 06, 2015 10:46 am
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

Maybe your lambda is on the way out then... And the bogging?
by curtusz
Thu Aug 06, 2015 2:13 am
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

Are you still getting high afr? I can't check the log as I'm using phone.... I only knew my fault as it only happened after I changed pump.... Could be so many things
by curtusz
Tue Aug 04, 2015 10:39 am
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

I changed my pump to an aem 320lph pump I used wrong pipe first time and the pressure must of balloned the pipe to cause a split (no sitching to straight rubber pipe) the pump would prime and the car would start and it was fine for pottering round town but under load the car had much less power and ...
by curtusz
Mon Aug 03, 2015 6:39 am
Forum: K-Pro Calibrations
Topic: VERY high AFR's and erratic TPS
Replies: 23
Views: 6257

Re: VERY high AFR's and erratic TPS

I got high af when I had a split fuel pump pipe... Don't know if that's your issue just another possibility
by curtusz
Wed Jul 01, 2015 3:10 am
Forum: K-Pro Calibrations
Topic: K20A2 RBC, inlet manifold, AEM short ram cai, dcsports exh manifold.
Replies: 18
Views: 4110

Re: K20A2 RBC, inlet manifold, AEM short ram cai, dcsports exh manifold.

if you don't have a wideband your better off using a basemap
by curtusz
Sun Jun 21, 2015 3:15 pm
Forum: K-Pro / KManager
Topic: Kpro v4 and digital input with em 30-4100
Replies: 8
Views: 3943

Re: Kpro v4 and digital input with em 30-4100

Let us know how you get on :)