Search found 80 matches

by tboostdsi
Sat Feb 18, 2006 3:08 pm
Forum: s300 / SManager
Topic: 12 psi JRSC base map??
Replies: 14
Views: 4058

hey picnic, which map did you use from the calibration forum. which one did you have the best luck with.
by tboostdsi
Tue Feb 14, 2006 5:02 pm
Forum: s300 / SManager
Topic: problem loading basemap.
Replies: 4
Views: 2332

files

file, open, click file name"b18supercharger440" then a prompt appears and says "floating point division by zero" then i click ok. then it goes to the next prompt "CONVERT V3 ROM" change to 440 injectors then click ok and all the fuel maps and ignition maps in the tables are at zero. here is the file...
by tboostdsi
Mon Feb 13, 2006 10:34 pm
Forum: s300 / SManager
Topic: problem loading basemap.
Replies: 4
Views: 2332

problem loading basemap.

floating point division by zero is the prompt i am getting when loading a basebin file. after everything is loaded there is no fuel and ignition tables. can someone help me or tell me why this is happening.
by tboostdsi
Mon Feb 13, 2006 11:00 am
Forum: s300 / SManager
Topic: tuning high speed fuel tables.
Replies: 7
Views: 4342

a/f in the mid 13s?! isn't that too lean? i've seen n/a cars tuned to low 13s. doesn't make sense that a boosted car would run leaner than that. thats why i am tryin to figure out how to tune in the high speed fuel tables. i am not driving around in boost, i just did one run in boost and those were...
by tboostdsi
Mon Feb 13, 2006 11:00 am
Forum: s300 / SManager
Topic: tuning high speed fuel tables.
Replies: 7
Views: 4342

a/f in the mid 13s?! isn't that too lean? i've seen n/a cars tuned to low 13s. doesn't make sense that a boosted car would run leaner than that. thats why i am tryin to figure out how to tune in the high speed fuel tables. i am not driving around in boost, i just did one run in boost and those were...
by tboostdsi
Sun Feb 12, 2006 12:42 pm
Forum: s300 / SManager
Topic: tuning high speed fuel tables.
Replies: 7
Views: 4342

tuning high speed fuel tables.

how do i go about tuning high speed fuel tables? i cant go into high speed fuel tables. i am trying to tune for boost. my a/f is mid 13's in boost columns. i can tune the boost columns in the low speed but won't let me see the columns for high spee. how do i go about doing this. thanks for the help.
by tboostdsi
Fri Feb 10, 2006 2:21 pm
Forum: s300 / SManager
Topic: what calibration should i use?
Replies: 0
Views: 1183

what calibration should i use?

hi, i have a wideband first off so i can tune myself. i was wondering which calibration i should use. one thats close to my engine setup or one that matches my ecu. I have a p28 obd2b which is an obd1 ecu just with the conversion already on the ecu. i have a b18c5 84mm bore dart block 9:4:1 w itr ca...
by tboostdsi
Thu Feb 09, 2006 11:41 am
Forum: s300 / SManager
Topic: need base map for turbo gsr
Replies: 3
Views: 2534

HA SPUNK, hopefully you can add to my question. i have a b18c5 84 mm bore with your hondata p28 obd2b ecu. if i would like to create my own and new basemap, which file should i use. the p28 file, the p72 file (since it is for a b18). in other words, should i choose the name of the file or the descri...
by tboostdsi
Thu Feb 09, 2006 8:30 am
Forum: s300 / SManager
Topic: mis fire when cold start
Replies: 5
Views: 2402

yes, but thought i would ask the experts......what should my af be when engine is cold at idle.
by tboostdsi
Tue Feb 07, 2006 1:31 pm
Forum: s300 / SManager
Topic: mis fire when cold start
Replies: 5
Views: 2402

air fuel reads 13.5 or so and 14.7 to 15.5 . idle jumps up and down when cold start. idle is very lumpy. once car is warmed up a/f stays at 14.7 . thansk again for the help.
by tboostdsi
Tue Feb 07, 2006 9:34 am
Forum: s300 / SManager
Topic: mis fire when cold start
Replies: 5
Views: 2402

mis fire when cold start

i have s300 and at cold start only i can hear the sound of a misfire and small pop in the exhaust almost like a back fire but very mild. once the car is heated up there is no more misfire....any suggestions. do you think my timing is off on the crank from what it is on my s300 ignition tables? any t...
by tboostdsi
Tue Feb 07, 2006 8:08 am
Forum: s300 / SManager
Topic: "Invert Purge Valve" 1.1.2 Feature - Reset when op
Replies: 3
Views: 2240

same thing, when i go to create boost tables, and check the "retard ignition and add fuel under boost" they uncheck themselves when i go back under create boost tables.
by tboostdsi
Sun Feb 05, 2006 9:05 am
Forum: s300 / SManager
Topic: hondata s300 b16a
Replies: 5
Views: 3076

re

i figured i should hook my wideband up that way. but the way i have it is same thing but with the eld as my wideband. i think i am going to hook it up the way you did because i am not getting the right numbers in the cinversion with the eld being hooked up. how accurate is the datalogg wideband and ...
by tboostdsi
Sat Feb 04, 2006 11:39 am
Forum: s300 / SManager
Topic: hondata s300 b16a
Replies: 5
Views: 3076

hey gezzuzz3, this has nothing to do w your post, but how did you wire up your wideband? do you have the plx? did you wire up the wideband to the eld and the narrowband to the oem o2 sensor input wire? i'm asking this because you and i might have the same setup.....that is how i have mine wired up a...
by tboostdsi
Fri Feb 03, 2006 10:08 pm
Forum: s300 / SManager
Topic: need b18c5 base map?
Replies: 0
Views: 1185

need b18c5 base map?

anybody have a base map for a b18c5 84 mm bore , rc 440 injectors, jrsc 8lbs or any type of b18 base map to get me a little closer...thanks