Search found 44 matches

by CHB
Fri Jan 05, 2018 7:35 am
Forum: K-Pro / KManager
Topic: K-Series VTEC Solenoid Pressure Switch
Replies: 3
Views: 738

K-Series VTEC Solenoid Pressure Switch

Hi Hondata, First of all, I am not asking about the oil pressure switch on the engine block. The VTEC solenoid pressure switch I meant here is the one next to VTEC solenoid. Will Kpro4 scan the status of this switch if the engine operating RPM is less than what the VTEC activation RPM? Let say VTEC ...
by CHB
Thu Nov 30, 2017 8:47 pm
Forum: KManager Display Templates
Topic: Hondata Kpro4 APP on Double Din Android?
Replies: 5
Views: 2649

Re: Hondata Kpro4 APP on Double Din Android?

Sorry I have to rephrase my question.

Can Mobile App runs on an Android and blue-tooth Compatible Double Din Audio Player?
by CHB
Thu Nov 30, 2017 8:09 pm
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 964

Re: K24A1 / K20A3 PND Kpro4 VTEC Killer setup

Hi Spunkster Thanks for your input. Okay now lets forget about the MAP sensor change. VTEC Killer setup will always runs on the Hi-speed cam lobe. I believe I only need to tune the "low speed cam" tables and set VTEC Point higher than the target redline RPM so that the ECU never need to run the "Hi ...
by CHB
Thu Nov 30, 2017 6:49 am
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 964

Re: K24A1 / K20A3 PND Kpro4 VTEC Killer setup

How about extending the RPM range on the low speed cam?
by CHB
Sun Nov 26, 2017 10:16 pm
Forum: KManager Display Templates
Topic: Hondata Kpro4 APP on Double Din Android?
Replies: 5
Views: 2649

Hondata Kpro4 APP on Double Din Android?

Hi guys
Will the Hondata K-Manager Kpro4 works on those Double Din Audio Player (has Bluetooth compatibility of course)

Don't need it to do datalogging but just to display all the vital informations will be useful.

Any idea?
by CHB
Thu Nov 23, 2017 8:06 pm
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 964

K24A1 / K20A3 PND Kpro4 VTEC Killer setup

Hi Hondata, I now currently running K20A3 PND Kpro4 and it runs flawlessly. I am going to upgrade the engine with "true 3 lobes" cams from K20A Type R and running on the High Speed cam lobes all the time, aka VTEC Killer. Should I tune the ECU with Low Speed Cam (Fuel, Ignition and VTC maps) and ign...
by CHB
Fri Nov 03, 2017 6:55 pm
Forum: K-Pro / KManager
Topic: Kpro4 Oil Pressure Fail safe
Replies: 1
Views: 544

Kpro4 Oil Pressure Fail safe

Hi guys,
Is there a way kpro4 can utilise an oil pressure sensor input (analogue input 0-5V) and activate some sort of fail safe mode (RPM limit to 2000RPM if oil pressure dropped below say 25psi)?
by CHB
Fri Oct 20, 2017 8:36 am
Forum: K-Pro / KManager
Topic: K20A3 Base RSX PND ECU controlling K24A2(True 3 lobes VTEC IN/EX)
Replies: 1
Views: 473

K20A3 Base RSX PND ECU controlling K24A2(True 3 lobes VTEC IN/EX)

Hi guys, I am in the plan to upgrade my RSX 02 from K20A3 to K24A3(Australian). I will retain everything from wiring to the 5 speed gearbox and the already upgraded Kpro4 PND ECU. Now, question is will the PND Kpro4 ECU able to control the K24A3 engine correctly as in the the true 3 lobes VTEC (Inta...
by CHB
Sat Jul 08, 2017 6:34 pm
Forum: K-Pro / KManager
Topic: KPro4 PND K20A3 Wideband O2 application
Replies: 1
Views: 421

KPro4 PND K20A3 Wideband O2 application

Anyone can confirm the primary O2 sensor on RSX Base is wideband as Type S/Type R? If not, can I install aftermarket wideband like Innovate LC2, program it to send out signal as stock O2 sensor would, and feed the signal back into ECU(Already have hondata Kpro V4) and run fully closed loop? I know I...
by CHB
Sat Jun 17, 2017 7:25 am
Forum: K-Pro / KManager
Topic: Kpro V4 Digital/Analogue Input & Output wiring
Replies: 1
Views: 685

Kpro V4 Digital/Analogue Input & Output wiring

Hi guys, Going to send my PND ECU for KPro V4 next week. Just today the dealer told me that the digital/analogue input and output wiring will be hard wired to ECU connector. Won't that will delete some of the factory functionality of the wiring as the way they connect those additional 20 wirings for...
by CHB
Wed May 31, 2017 2:32 am
Forum: K-Pro / KManager
Topic: Can 37820-PND-Q01 compatible with K-Pro?
Replies: 6
Views: 840

Re: Can 37820-PND-Q01 compatible with K-Pro?

It is 37820-PND-Q01. Photos as attached. Not sure which one is the main processor but I did notice that one IC is NEC, all others are Keihin.
by CHB
Sat May 27, 2017 8:27 am
Forum: K-Pro / KManager
Topic: Can 37820-PND-Q01 compatible with K-Pro?
Replies: 6
Views: 840

Honda DC5 2001 with 37820-PND-Q01 ECU compatible with Hondata K Pro?

Hi guys,
Just bought a project 2001 Honda Integra DC5 K20A3 Manual 5 speed base model. Can anyone confirm if 37820-PND-Q01 ECU compatible with Hondata K Pro?
Every reference about Honda DC5 / Acura RSX I can found on the net all starts from year 2002.

Cheers
Paul
by CHB
Sat May 27, 2017 12:38 am
Forum: K-Pro / KManager
Topic: Can 37820-PND-Q01 compatible with K-Pro?
Replies: 6
Views: 840

Can 37820-PND-Q01 compatible with K-Pro?

Hi guys,
Just bought a project 2001 Honda Integra DC5 K20A3 Manual 5 speed base model. Can anyone confirm if 37820-PND-Q01 ECU compatible with Hondata K Pro?
Every reference about Honda DC5 / Acura RSX I can found on the net all starts from year 2002.

Cheers
Paul