Hondata

Hi

Does K pro support JDM Integra iS?
ECU part number is 32780-PND-013.

Has anyone did this? if so, what calibration should I use?

Hi I just wanted to make sure about gear compensations... Fuel compensation: adjusts in %, positive number= richer / negative number= leaner Ignition compensation: adjusts in degree, positive number= advance / negative number = retard TPS Ignition retard: adjusts in %, positive number = more retard ...

Hi I just wanted to know if ELD pin accepts imput voltage of 12V. I was thinking about connecting wideband output to ELD pin though the wideband outputs 0-12V instead of 0-5V. I'm worrying about ECU fries with 12V, so please advise. Also, thinking about comparing A/F from OEM sensor and wideband out...

After completely uninstalling AVG, he could open 1.3.0.0 without problem. Thanks.

AVG is so useless

My customer also has similar issue, cannot open latest K manager. When he install with install CD (ver 1.2.2.4), K manager normally works. Though, both of the case checking update via software and downloading latest version installer, K manager won't open. Error dialog said "cannot find file or...

Please advise, I might need to send one very soon

I'm distributor in japan, importing via AAI.
They haven't respond us for a long time.

Hi

I have a K-pro in stock without installed in ECU,
and I don't have another ECU to put so far.
Its serial# is 3832, it is upgradable by firmware update.
However the upgrade order form says "ECU with k-pro"
is required to be sent to you.

Can you upgrade it for me if I send it without ECU?

Hi Spunkster, I have just told from customer that Aux output works with some output pins, Fan control and alternator control. However A10 pin and IAB is still not working even with P72 ECU. Is that normal? I have sent another unit of S300 to see if it is caused by faulty unit, though the result was ...

okay I see...

Normally that H22A secondary goes to ground when idle to 4000rpm, then output positive signal to open secondary runner. He set output as inverted signal and use relay between ECU and solenoid. He also tried non inverted signal too. However neither ground nor positive signal comes to the wire. Anythi...

Hi

Now here in Japan, new Civic type R has come finally.
ECU for that car seem different from both ITR and CL7 accord.

Do you guys have any information about this ECU
and do you guys have schedule to add support for this car?

Hi Spunkster,

He is still struggling to use his P30 with Prelude,
he tried other outputs though, AUX output is still not working.

He set imput as always on, then tried to use A12 and A10 as output.
Though these pins outputs nothing...

Hi there My client is using S300J on prelude, he is connecting wideband O2 to standard O2 imput. He said that AFR on WOT (around 100kpa MAP) differes between the case when he check and uncheck "closed loop" option. He sat closed loop condition up to 86kpa MAP, though ECU still seem to keep...

Okay I see... So... vise versa, which ECU has IAB control? They would use the ECU which has IAB output and Barometric pressure sensor... I thought JDM P30 doesn't have baro press sensor too, right? Then I thought S series ECU can show knock voltage as well as K series... You mean that knock sensor i...