Hondata

Hi there,

I'm now doing K-pro with JDM EP3/ PRC ECU.
I changed the fan control temperature to 85 degC though,
the fan didn't work at that temperature.
I did check the ECT with K-pro datalog.

What's the problem?

Hi there, my customer is gonna tune their car, JDM BB6 prelude H22A using P30 ECU. They now have some issue: 1. secondary intake runner won't work 2. knock level shows obviously low reading 1. secondary intake runner They set secondary intake runner working around 5500rpm, though the solenoid didn't...

Hi there,

I have installed the S300J into the ECU, though I broke the leg of 373 latch.
I would get another 373 latch, which to buy?

On the ECU, there is "74HC373" description,
though the latch came with S300J was AC373...

Can I use 74HC373 latch from any manufacturer?

Hi there,

I was wondering if K-Pro can be used for JDM CL7 Accord EuroR?
The car has K20A engine. however the ECU# is different.
Unfortunately I haven't check if the PCB and processor is similar to
ITR's one....


Does anyone know any information about applications?

I can find the stock calibration file for JDM ITR K20A PRC ECU in the supplied calibrations folder,
though there is no file for JDM CTR's PRD ECU..
Does anyone have a stock calibration file for PRD?
or can we use PRC calibration for that car?

Thanks in advanced

Hi

I just wanted to make sure if the K-manager software works on
new Windows Vista,
I think most of software designed for windows XP will work though...

Please advise

hey guys, I have PRC-J01 ECU now. Chasis No. was DC5-230## and registered in '05. It must be from 05 JDM ITR ECU. Here are the information. Word on PCB nearby the chip... T1Y-D3 001DD-L5003-00 Chip No was.... OKI L66Q592, 4532BA6G2 J160 (for fuel pump) was joined, R600 and R601 are not. So it should...

Today I tried to put values in the table again...
now I can!!!

Last week I went to AAI motorsports and talked to Mr Wong about this,
He couldn't do that at that time too....

Maybe a bug in myself!!!

Thanks guys anyways ;-)

thanks for the reply,
I tried to click and type the value, though I couldn't.
I clicked the table and type, nothing has been changed.

Really I can do nothing to these tables.... weird

Do we need to be online to the ECU to edit them maybe?

Hi I'm new to this forum, from japan. I'm now using K-manager version 1.2.2.2 and find that some factors like Gear compensation and Temperature control tables cannot be changed.... the other parameters can be edited because the numbers are in text box. However above factors are only "shown"...