Search found 72 matches

by hiperformance
Tue Aug 28, 2007 2:23 am
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

You can't go by RPM as that has nothing to do with the AF ratio. withthe car not running and the key in the on position, the PLX should be on and you will be able to datalog and get the voltage offset right as it will not be fluctuating as much. i was not trying to set the voltage off set. these nu...
by hiperformance
Mon Aug 27, 2007 3:00 pm
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

still having this problem, any suggestions?
by hiperformance
Tue Aug 14, 2007 1:27 am
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

Voltage output from the white wire on the PLX M-300

Idle: 3.5
2k: 4.2
3k: 4.5
4k: 3.9

I did note the tach is off by 200rpm, so above will be off by 200rpm.

I don't know, when hooked up in method #1, the data log will not follow the plx accurately?

any thoughs. thanks.
by hiperformance
Mon Aug 13, 2007 1:41 pm
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

You will need to use a multi meter ans see what the outputs form the PLX are doing...the display for hte plx may be workign, but the outputs may not be. I already did that, the output from the white wire on the plx is fine? i will go today and hold the rpm at 1,2,3,4K and log the output with my mul...
by hiperformance
Mon Aug 13, 2007 12:40 pm
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

Since I do not have your vehicle in front of me to see what you have done it is nearly impossible to tell what the problem is. I personally own 3 cars with the PLX setup using method #1 and did not need to remove any resistor or do anything beyond what is in the instructions. I just removed the res...
by hiperformance
Sun Aug 12, 2007 1:48 am
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

ok, so I was playing with the low speed fuel and for the hell of it, I decided to try and rich-en up 4 boxes that were highlighted while the car was idling, I wanted to see the change it made in a/f on the plx. it worked fine, but I noticed that the live datalog a/f did not follow the plx as the tab...
by hiperformance
Sat Aug 11, 2007 3:11 am
Forum: s300 / SManager
Topic: help setting up plx m-300 with s300 for closed/open loop
Replies: 40
Views: 16936

help setting up plx m-300 with s300 for closed/open loop

using the offset voltage, I am trying to match the M-300 to the logger display. I have it close. using -0.9v but its hard to get it perfect. the car is running while I am trying to do this, my M-300 display flucuates quite quickly and the logger is more steady. is that right? am I doing it wrong? th...
by hiperformance
Fri Mar 30, 2007 12:39 am
Forum: S300 Calibrations
Topic: Looking for an H22 turbo map
Replies: 7
Views: 5011

Thanks for the post.
by hiperformance
Sun Mar 11, 2007 5:07 am
Forum: s300 / SManager
Topic: boosting help please
Replies: 3
Views: 1493

Ok, so this thought just came to me. I posted before looking for a turbo h22 map, with out success. What I am wondering now is, can I load the stock h22 map then go into options and select ?show boost tables? and use the map generated as a starting point for my application?

Thanks.
by hiperformance
Sun Mar 11, 2007 4:05 am
Forum: s300 / SManager
Topic: boosting help please
Replies: 3
Views: 1493

Alright, seriously 1 minute after I posted this question, I clicked on options and show boost tables and there they were, 11-12-13.... I assume I just answered my own question. If not please direct me in the right direction.

Thanks.
by hiperformance
Sun Mar 11, 2007 3:56 am
Forum: s300 / SManager
Topic: boosting help please
Replies: 3
Views: 1493

boosting help please

Noob to tuning. My question is, if I want to go turbo. What do I do with the n/a map besides changing the ignition timing and fuel tables accordingly? Do I need to add forced induction columns too? For example, b11-b12-b13? I have looked in the provided maps under the b16greddy and revhard, but I di...
by hiperformance
Fri Feb 16, 2007 2:28 am
Forum: S300 Calibrations
Topic: Looking for an H22 turbo map
Replies: 7
Views: 5011

Looking for an H22 turbo map

Stock H22 with drag turbo kit. Please email me hiperformancenews@hotmail.com

Thanks.