Search found 82 matches

by all-black
Fri Oct 30, 2009 12:24 pm
Forum: FlashPro Manager
Topic: remote start with flashpro????
Replies: 6
Views: 3359

make sure the inobilizer is being de activated properly by the dei 556u or whatever device ur using sometime placment of the ring that goes around the imobilizer is touchy. also make sure the cranking time on the remote start is set long enough to start the car. also that u use voltage sense so that...
by all-black
Thu Oct 22, 2009 3:31 pm
Forum: Civic Si 2006-2011 Americas
Topic: Speed Adjustment Parameter = No Cruise Control
Replies: 10
Views: 4835

hey man whats up nice to finnaly see u on here.
by all-black
Wed Oct 21, 2009 9:01 pm
Forum: Civic Si 2006-2011 Americas
Topic: Over rev code question for Hondata
Replies: 7
Views: 4577

im not sure if this is entirely true i installed a k24 in my fg when i went to start the car for the first time the crank sensor clip was not on all the way and i threw a few codes and one of them was over rev i looked up the code and it wasnt even for our vehicals but was an over rev code i cleared...
by all-black
Wed Oct 21, 2009 8:29 am
Forum: FlashPro Manager
Topic: compatibility
Replies: 3
Views: 2745

i had this problem also no fuel table values and no tracing, i un installed fp manager and then re installed and everything works fine now.
by all-black
Sun Oct 18, 2009 12:02 pm
Forum: FlashPro Manager
Topic: FlashPro Manager v1.1.1.0
Replies: 7
Views: 4793

since i updated to version 1.1.1.0 when i open up my calibrations i cant see any values in my fuel tables it still lets me increase and decease but i cant see what value im starting with or ending with
by all-black
Tue Oct 06, 2009 1:47 pm
Forum: FlashPro Manager
Topic: what has been noticed
Replies: 1
Views: 1890

what has been noticed

if you tune the car with flash pro in open loop and then switch to closed loop you need to add 10 to 13 percent to the fueling over the whole map. i spent about 4hours on the dyno with david from church on sunday
by all-black
Mon Oct 05, 2009 9:06 pm
Forum: Civic Si 2006-2011 Americas
Topic: Using sec o2 wideband input
Replies: 14
Views: 5219

i have no problems with this feature i pinned it into the ecu reads fine
by all-black
Thu Oct 01, 2009 11:10 am
Forum: Civic Si 2006-2011 Americas
Topic: 08 Si hard to start
Replies: 16
Views: 6974

i have cold starting problems also. im running a k24 fully built 12.5 1 with rdx injectors i have had the cold start problem when i was running stock injectors on my k20 also. it seems that i have to crank the car for a long time then re turn over the car and then the car will start but it starts ve...
by all-black
Sun Sep 27, 2009 1:50 pm
Forum: FlashPro Manager
Topic: FlashPro Manager V1.1.0.9 beta
Replies: 31
Views: 12761

ELD = electronic load detector.

question hondata where is the table for the throttle plate adjustment in the fpmanager 1.0.9
by all-black
Sat Aug 29, 2009 1:31 pm
Forum: FlashPro Calibrations
Topic: k24 basemap
Replies: 8
Views: 12300

i am putting im my k24/k20 build over the weekend its fully built 12.5.1 compression. i will be starting it up for the first time shortly. can you guys give me some advise on a base map to start the car on i was planning on using the stock map based tune and changing the injector size to 410 because...
by all-black
Sat Aug 08, 2009 9:35 pm
Forum: Civic Si 2006-2011 Americas
Topic: intermiten problems
Replies: 1
Views: 1308

intermiten problems

so since i have installed my flash pro i have noticed the when the cooling fan turns on my radio will sometime turn off/on really quick. same thing when the ac compressor cycles it sometimes turns the radio on/off but if i uninstall the flashpro the problem isnt there
by all-black
Sat Aug 08, 2009 9:31 am
Forum: Civic Si 2006-2011 Americas
Topic: need help with a tune
Replies: 18
Views: 5856

from where to where and by how much would you guess. also is there a way to make the car stay in vtec more like when im letting off the throttle some and shift the car rpms are still in vtec but it disengages is the a way to keep it in vtec so the transitions are smoother
by all-black
Fri Aug 07, 2009 8:45 am
Forum: Civic Si 2006-2011 Americas
Topic: need help with a tune
Replies: 18
Views: 5856

i know i took the car to be tuned and the guy i guess just cant tune. the knock is really bad. i told him there shouldnt be any knock especially under wot. So i decided i would try and street tune my car atleast to get rid of knock and i can worry about power later. so i took the base map.... map in...
by all-black
Thu Aug 06, 2009 9:04 am
Forum: Civic Si 2006-2011 Americas
Topic: Part throttle knock %
Replies: 18
Views: 6263

Z1 Performance
would you mind helping me out taking a look at a few of my data logs and tune to see where i need to make some adjustments.
by all-black
Thu Aug 06, 2009 7:17 am
Forum: Civic Si 2006-2011 Americas
Topic: need help with a tune
Replies: 18
Views: 5856

i dont really have the money right now to pay to dyno the car like i did the other day i spent 4 hours on the dyno it gets expensive... i dont mind dynoing the car again but i want to know where my problem is or some kind of idea what is the difference im seeing between part open throttle and wot......