Search found 239 matches

by fonz600
Fri Dec 19, 2008 10:07 am
Forum: K-Pro / KManager
Topic: FUEL ADJUSTMENT ON FUEL TABLES V1.3.4.0
Replies: 14
Views: 11207

I don't know of any tuner I'd recommend to be honest and I've worked on maps from a few of the so called specialists. I thought about getting some interest on a date where MASE would come and tune cars with Kpro at an independant dyno but would depend on interest. He comes highly recommended althoug...
by fonz600
Thu Dec 18, 2008 11:14 am
Forum: K-Pro / KManager
Topic: FUEL ADJUSTMENT ON FUEL TABLES V1.3.4.0
Replies: 14
Views: 11207

Are you using 50 cam for cruise as well? If I was you I'd tune your 20 and 30 cams and then set it at 25 for cruise.
by fonz600
Wed Dec 17, 2008 5:06 pm
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

OK well before you use that map, Just use this one. I've raised the crossover and changed the low cam angle to suit.
by fonz600
Wed Dec 17, 2008 4:13 pm
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

Give this map a try mate and do the same. Do you agree that your car runs pretty flat from 4.1 to 4.8k?
by fonz600
Wed Dec 17, 2008 4:06 pm
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

the itr map has it set to 3.8k Cranny. So need to raise it :wink: *EDIT scrap that. I thought you were using the itr-k20 map. No matter. Cranny the K20A2 map is set to 4.1k so still needs raised. EDIT** I redid the map for you mate using the K20A2 itr map. the map he was originally using , k20a2 ct...
by fonz600
Tue Dec 16, 2008 7:49 am
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

the itr map has it set to 3.8k Cranny. So need to raise it :wink:

*EDIT scrap that. I thought you were using the itr-k20 map. No matter. Cranny the K20A2 map is set to 4.1k so still needs raised.

EDIT** I redid the map for you mate using the K20A2 itr map.
by fonz600
Tue Dec 16, 2008 4:48 am
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

Ok give this a try and do another 3rd gear run for me. I've tweaked and smoothed your WOT tables but I adjusted all tables in one go. I also changed your gear ratios to suit your setup. You may be able to run more ignition but to be honest there ain't much point playing about with that unless you go...
by fonz600
Mon Dec 15, 2008 4:47 am
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

Do a 3rd gear run from 2k to redline and I'll sort your WOT fuelling.
I don't do full maps for free anymore so will help you on WOT as a favour but will only be quick changes to "all tables".

Cranny might help you further.
by fonz600
Mon Dec 15, 2008 4:43 am
Forum: K-Pro / KManager
Topic: A/F Ratio Spike to 32
Replies: 50
Views: 14797

If you mean when you are off the throttle completely then yeah it'll read that high.

Also your running too rich. You need to take out quite a bit fuel in bits.
Do you know how to modify the tables and what you should be looking for, because if you don't my advice is don't muck around with it.
by fonz600
Sun Nov 30, 2008 8:47 am
Forum: K-Pro Calibrations
Topic: cranny... need yer help again with JDM tune
Replies: 132
Views: 46430

cranny wrote:sweet fuck all , lol. waiting for a datalog once a week , lol.
You got more patience than me lol. I ended up logging in 3 times a day while helping people mainly to find no replies so only doing stuff via email from now as it can get pretty time consuming dealing with 3 people at once at times.
by fonz600
Thu Nov 20, 2008 10:12 am
Forum: K-Pro Calibrations
Topic: JDM DC5 basic cold air map anyone
Replies: 1
Views: 2486

Use the itr.kal and do a datalog and post it on here. You'll probably need to raise crossover and take out fuel.
by fonz600
Tue Nov 11, 2008 9:40 am
Forum: K-Pro / KManager
Topic: Downloading from ECU, why not?
Replies: 12
Views: 4466

What Spunskter was saying is the existing map may have security set on it. That means that you may not be able to download the map as the tuner has put a lock on it. Only way to put a new map on is to clear security and upload a new map. To answer your original post, it has been known for a map to b...
by fonz600
Mon Nov 10, 2008 12:19 pm
Forum: K-Pro Calibrations
Topic: Knocking at Lower RPM
Replies: 24
Views: 10818

Yeah man. Those should be curves, not spikes. They shouldn't overlap with the above or below lines either.
by fonz600
Thu Nov 06, 2008 4:46 am
Forum: K-Pro / KManager
Topic: Trying to understand lambda overlay
Replies: 1
Views: 1589

Fixing the cam angle is the correct way. Ticking adjust all angles box is the crude quick way. Alternatively you can look at your cam1 and cam2 values and make the lambda changes to the corresponding cam angles in the fuel map tables. E.g you have -5 at 2k-3k in columns 4 and 5 in low cam fuel table...
by fonz600
Thu Oct 30, 2008 5:31 am
Forum: K-Pro / KManager
Topic: JDM Type R K20A TC
Replies: 8
Views: 2978

OK just reread your initial post and your car does have DBW so guessing it is a FD2 which rules out Kpro until Hondata sort that out. Also I don't have any experience with turbo charged cars only supercharged and just had a look at the base maps on Kmanager for TC cars. Their crossover varies betwee...